Red RC » Avid RC

March 2, 2022

Avid Truss 1/8th truck wheel 4.0”

The Avid Truss 1/8th truck wheel is another innovation by Avid RC. The wheel is extremely important to the overall handling of your vehicle and is often overlooked. Avid took all the unique high-performance features from their 1/8th scale buggy wheel and placed them directly into this design. They also went back to the drawing board on reformulating the material to best withstand the brutally cold weather that racers are now willing to race in. Looking inside the wheel you will see where it gets the name ‘Truss’. The internal ribbing uses the strength of triangles instead of having straight ribs. The focus of the Truss starts at the centre of the wheel, so the tighter triangles help keep the torque strength right where you want it when applying all your throttle, at the nut. Available in yellow and white.

View the inner side of the wheel here

January 31, 2022

Avid 51T-54T 64P aluminium pinions

Avid are proud to announce the release of their 64P aluminium pinions in sizes 51T-54T available individually or in a set, that expand their already popular range. These 64 pitch pinion is made out of 7075-T6 aluminium, hard-anodised to reduce wear and friction, and in a pack of 4 (51, 52, 53 & 54). The details are laser etched onto the pinion for easy notification and it uses the common 1/8″ bore (3.17mm) and includes one set screw.

Source: Avid [avidrc.com]

January 27, 2022

Avid RC droop gauge blocks

Avid RC have announced the release of their new droop gauge blocks, available individually or together as a kit with their circular gauge. Avid droop gauge blocks are a traditional staple for checking the droop on your touring cars. These 10mm blocks are placed under your chassis so you can easily check your arm level height with callipers or with their handy circular gauge.

Source: Avid [avidrc.com]

January 6, 2022

Avid B6.3 Arm Mount C wider -2°

The new Avid B6.3 -2° C arm mount is a must-have if you are racing on high bite surfaces such as carpet or turf. This mount frees up the vehicle in the turns and when landing jumps sideways such as corner tabletops. To get to the low rear toe settings you need on carpet, you have to start narrowing the pills through the D Mount which is increasing side bite by decreasing your track width. This C Arm mount prevents that from happening by widening the C Arm Mount 1.4mm, thus starting you at 1 deg of rear toe with centered pills on the C and D mount instead of 3.

Source: Avid [avidrc.com]

January 5, 2022

Avid bearing tool, multi-wrench & tweezers

Avid have introduced some essential tools to their line-up. First up is the bearing sizer/tester, the perfect tool for seeing if your bearings need to be maintained by spinning them while they are on the sizer. Suitable for bearing sizes of 1/8″, 4, 5, 6, 1/4″, 7, 8, 9, 10, 11, 12, 13, 14 & 15mm. Next up is the ubiquitous 4-in-1 multi-wrench. Made from durable steel, it has a 8mm nut wrench for glow plugs, 10mm nut wrench for clutch nuts, 3mm hex for M4 chassis screws and 5mm hex for pillow ball adjustment. Finally there are two different tweezers, a straight and curved version for helping with small parts and fasteners.

View the other new tools here

December 31, 2021

Avid line of part boxes

Avid have announced the release of their new line of Avid part boxes. The plastic part boxes come in different shapes and sizes, with different internal bin layouts allowing easy organisation of all your small parts. Available in 4 versions there is the 3 bin parts box (180x115x20mm), 10 bin parts box (130x168x23mm), 15 bin parts box (175x100x23mm) and finally the round 8 bin parts box (105x25mm).

View the other parts boxes here

December 28, 2021

Avid A800 titanium ball stud kit

Avid have introduced this titanium ball stud kit for the Awesomatix A800. It includes 24 pieces to replace all the kit ball studs with titanium in order to minimise weight without sacrificing strength. This kit is designed to work with the kit ball cups.

Source: Avid [avidrc.com]

October 6, 2021

Avid DR10 aluminium steering bellcranks

These new Avid DR10 aluminium steering bellcranks are machined from billet 7075-T6 aluminium alloy, black anodised and have silver edge highlights for that premium look. Each package includes 1 left and 1 right bellcrank and 2 aluminium crush tubes for the steering rack bearings. These are a must-have upgrade for any serious racer as they eliminate flex in the steering system for maximum steering feel.

Source: Avid [avidrc.com]