Red RC » Destiny

September 5, 2019

Vortex Racing MP1 RX-10SR mid pulley conversion kit

Spanish company Vortex Racing has announced the soon release of their MP1 mid pulley conversion kit for the Destiny RX-10SR 4WD touring car kit. Using the conversion will provide a car that is very easy to drive, that is more consistent, and that carries more speed through the corner, all while offering equal traction front and rear which is helpful especially when running modified motors. The designs focused on the overall flex of the symmetrical chassis and top deck, giving multiple options for different track conditions. The main chassis also accepts both standard and shorty-sized packs only by moving the battery mounts. The conversion utilises a small one-side mono-block motor mount with separate pulley shaft to make it lightweight while allowing to keep the motor close to the centre line. Also, in case a pulley bearing fails and damages the shaft, there is no need to replace the hole motor mount. In addition the servo mount was designed to provide options for weight balancing the car by moving the servo back/forth and left/right. The front and rear chassis stiffeners also allow control the overall chassis flex. The conversion kit is available for pre-order now by emailing Vortex Racing at info@vortex-racing.net.

View a list of the features and more images here

August 14, 2019

Destiny RX-10FF cooling fan mount & body stiffener

Available now from Destiny and made for the RX10-FF front-wheel driver touring car are an aluminium cooling fan mount and a carbon fibre rear body post stiffener. Starting with the motor fan mount, the part is machined from aluminium and it is of a vented design, allowing cooling air to escape for improved cooling efficiency while adding visual impact. The dark anodised mount with machined silver edge details attaches to the front bumper mount and it is usable with standard 30mm fan units. Also new is a carbon fibre body post stiffener that braces the rear body posts for improved stability and thus optimised aerodynamics. The machined carbon fiber brace is a direct fit.

View more images here

June 20, 2019

Destiny RX-10FF long rear body post set

Coming from Destiny and made for their RX-10FF FWD touring car is a long rear body post set. Utilising machined aluminium brackets and longer body mount posts the set helps to make better use of tall, hatchback-style body shells.

View another image here

June 14, 2019

Vortex Racing Ultimate ultra light-weight screw kits

Coming from Vortex Racing are three Ultimate ultra light-weight screw kits for the ARC R11 2019, Destiny RX-10SR and Xray T4’19 touring cars. The kits contain of high-quality 7075-T6 aluminium screw for the upper parts of the chassis as well as titanium fasteners for the bottom area, ensuring an exceptional weight reduction and stability compared to the standard steel screws. Also included are double secured aluminium M4 wheel nuts as well as aluminium M3 lock nuts if required by the vehicle. Both the ARC and Destiny-related kits include black-anodised aluminium hardware while the Xray-specific set includes orange anodised alloy screws. All three screw sets come in reusable boxes that can be used for storing small parts, electronics or spares. Manuals with detailed information on the screw sets can be found of Vortex Racing’s social media page here.

View another image here

June 14, 2019

Destiny RX-10 new design suspension arms

Destiny have announced the release of new design suspension arms for RX-10 series of touring cars. Offering improved traction and reliability the full-face arms are available in two different length and using different lower shock mounting positions which allows to fine-tune the suspension geometry. Available are the original geometry Type A arms (front 53mm/32.5mm, rear 54mm/38.5mm) as well as the new geometry Type B (front 53mm/31.5mm, rear 54mm/39.5mm), and new length Type C (52mm/31.5mm, rear 55/39.5mm) and Type D (52mm/30.5mm, rear 55mm/40.5mm) arm sets.

Source: Destiny [destinyracing.jp]

May 29, 2019

Destiny RX-10FF cross chassis battery mount set

Coming for the Destiny RX-10FF 1/10th FWD touring car is a cross chassis battery mount set. The kit allows for a floating or O-ring type battery mounting, the latter making for a slightly stiffer chassis setup while the mount also allows for forward and backward battery placement in order to fine-tune the car’s weight bias. Included in the set is all needed mounting hardware.

View another image here

January 28, 2019

Destiny VD12-2019 conversion kits

Coming soon from Destiny are two 2019 specification conversion kits for the VD12 1/12th scale pan car. Available as carbon or aluminium chassis version, the kits include new main chassis plates, new lower pod plates as well as updated floating servo mount and centre shock plates. Also included are redesigned aluminium power pod side plates. The conversions were thoroughly tested by Destiny’s Yugo Nagashima and they will hit stores soon.

View the alloy chassis conversion here

September 18, 2018

Destiny introduce new RX-10SR optionals

Made for the RX-10SR and RX-10S electric touring cars are several new optionals from Destiny. First up is the V2 aluminium battery bracket set for the SR and S variants. The set attaches directly to the chassis, doing away with the need to use fibre-reinforced tape and thus ensuring tweak-free battery mounting as the multi-piece battery locators and retainers only slightly touch the battery case. The set is made up using grey anodised aluminium and machined carbon fibre parts.

Continue reading here