February 12, 2016

Fenix X1 & SF2 aluminium chassis parts

Fenix X1 & SF2 aluminium chassis parts

Fenix have released new optional chassis and pod plates for the Xray X1 and Serpent SF2 formula car kits. Starting with the X1 chassis, it was designed to be way slimmer than the original, reducing scrubbing during hard cornering. Thanks to strategically machining the chassis weighs in at about 76g and it offers a good balance between torsional flex and rigidity. Also available is a suitable aluminium motor pod. Made as a direct replacement for the standard carbon fibre parts are the aluminium chassis and motor pod for the Serpent SF2. Machined from 7075-T6 aluminium and coming black anodised the parts make for different flex characteristics which can be beneficial in a range of track conditions. Additionally Fenix have also announced the Rattlesnake chassis conversion kit for the SF2 that allows to run the desired cross battery position. Included are the chassis, motor pod plate, upper plate and crossbrace.

View more images here


January 22, 2016

Fenix DFV 13.5T & 21.5T brushless stock motors

Fenix DFV 13.5T & 21.5T brushless stock motors

Italian company Fenix Racing have introduced their new DFV stock brushless motor. The EFRA-approved spec racing motor is available as 13.5T touring car and 21.5T formula variant and it utilises a machined 7075-T6 aluminium can with large airflow vents as well as a 12.5mm sintered Neodymium rotor for controllable torque over the whole RPM range. Pre-shaped heavy duty solder tabs and an adjustable timing endbell round out the package.

View another image here


January 15, 2016

Fenix PhiGamma2 formula bodyshell

Fenix PhiGamma2 formula bodyshell

New from Fenix comes the PhiGamma2 formula bodyshell. Designed using 3D CAD techniques with CFD validation the body offers improved aerodynamics for optimised steering response especially on typical electric circuits while retaining a stable rear end. As usual the body comes made from clear high-quality polycarbonate and it fits most of today’s 1/10th formula pan cars.

Source: Fenix [fenix-racing.com]


September 23, 2015

Fenix 1/10th formula gear differential

Fenix 1/10th formula gear differential

Fenix have issued a first image of their forthcoming gear differential for 1/10th formula cars. Coming for 6mm and 1/4″ rear axles the diff is designed to replace the standard ball differential as found on pretty much every formula kit out there. Offering a ball-raced and very narrow design the diff will allow for some fine-tuning using different greases from what is understood. A definite release date is not set yet but according to Fenix the diff, that is on show on the forthcoming Hobby Model Expo in Milan, will become available by the end of the year.

Source: Fenix [fenix-racing.com]


August 27, 2015

Fenix Mistral 1/10th scale Formula kit

Fenix Mistral 1/10th scale Formula kit

Following a recent teaser Fenix now have first images of their forthcoming Mistral 1/10th scale Formula pan car kit available. Designed to offer the lowest possible centre of gravity the vehicle builds on a high-quality 2.5mm quasi isotropic carbon fibre chassis that allows for three different battery positions; a longitudinal as well as a front or rear transversal one. When a low-profile shorty LiPo is used additional weights can be placed on the chassis to obtain the best possible weight balance. Up front a redesigned suspension allows for easy rigidity adjustment and independently adjustable camber and caster settings. The car will become available as a full kit, including genuine Tuning Haus alloy chassis posts, and also as an upgrade set for the already existing Suzuka kit.

Click here to view more photos


July 28, 2015

Fenix Mistral 1/10th Formula kit – Coming soon

Fenix Mistral 1/10th Formula kit – Coming soon

Italian company Fenix have announced the forthcoming release of their all-new Mistral 1/10th Formula car. Named after the Paul Ricard circuit’s iconic Mistral straight the vehicle’s design is meant to keep a legacy between real Formula cars and RC racing. Packed with some “interesting and different” features the kit will become available by September.

Source: Fenix Racing [fenix-racing.com]


February 12, 2015

Fenix Su-zuka aluminium chassis plate

Fenix Su-zuka aluminium chassis plate

New from Fenix and made for the Su-zuka formula kit is a water-cut aluminium chassis. Made from 2mm 7075-T6 material and coming hard anodised the chassis is considered to be an all-round item that works from low grip asphalt to high grip carpet conditions.

Source: Fenix Racing [fenix-racing.com]


November 21, 2014

Fenix Phi-Gamma 1/10th formula bodyshell

Fenix Phi-Gamma 1/10th formula bodyshell

Fenix Racing from Italy introduce their new Phi-Gamma formula bodyshell for 1/10th cars. Designed using 3D CAD software with Computational Fluid Dynamics validation for improved aerodynamics, the body is best used on medium to fast tracks and it is completely tuneable in terms of downforce and drag. The body is made from clear polycarbonate and fits most of today’s formula chassis.

Source: Fenix [fenix-racing.com]