April 15, 2016

GRP Micro & Cross 1/6th scale off-road tyres

GRP Micro & Cross 1/6th scale off-road tyres

GRP have introduced the new Micro and Cross 1/6th scale off-road tyres. Starting with the Micro tyre, the tread was designed for the use on clean or slightly dusty tracks with medium to high grip. Smaller sized blocks make for good traction and and an easy to drive car. The Cross was designed for sandy and dusty low to medium grip conditions with the tyre’s asymmetric design allowing to adjust the overall grip available. The tread offers additional outer ribs on one side – which is not visible in the above rendering – to increase side bite in loose track conditions. Both 180mm tyres are available in the dirt-specific S-series and sand/astroturf specific P-series compounds including inserts.

Source: GRP [grpgandini.it]


January 7, 2016

GRP 1/5th scale bike tyres

GRP 1/5th scale bike tyres

GRP have added new 1/5th scale on-road bike tyres to their 2016 line-up. Both the pre-mounted front and rear wheels are available in the new M5 soft and M3 super soft compound as well as the R2 light rain/humid compound. The rear tyres are of a new shape for improved traction and side bite and all tyres are available pre-glued on a full rim or as open rim type.

Source: GRP [grpgandini.it]


February 20, 2015

GRP Evolution V11 2015 touring car tyres

GRP Evolution V11 2015 touring car tyres

New from GRP come the Evolution V11 2015 touring car rubber tyres. Available pre-mounted on white disc rims the 2015 spec tyre features a new carbon composite belt and they are available in two carpet and two asphalt-specific compounds. The carpet C28 and C32 tyres are built using a lightweight insert while the A32 and A36 asphalt variants use a medium moulded insert. Markings on the outside of the wheel help with easy identification and the tyres are available in sets of four.

Source: GRP [grpgandini.it]


November 26, 2014

GRP pre-glued 1/10th formula tyres

GRP pre-glued 1/10th formula tyres

Italian company GRP introduce their new line of pre-glued tyres for 1/10th scale formula chassis. Offering a unique wheel design with a larger inner diameter of 39mm and a smaller outer diameter of 30mm the tyres offer a precise handling and improved on-track performance without sacrificing scale looks. Coming in S2 high-grip compound the tyres are available as 33.5mm wide front and 38.5mm wide rear offerings, pre-mounted on carbon reinforced F104-compatible 6-spoke rims with water-cut foam inserts. The pre-scuffed tyres are usable immediately and do not require to be run-in or pre-sanded before use.

Click here to view another photo


October 13, 2014

GRP 1/10th buggy carpet tyres

GRP 1/10th buggy carpet tyres

GRP’s 1/10th buggy tyres are specially designed for the use on carpet and astroturf tracks and they come as Buldog 2WD front, Conic 4WD front and 2WD/4WD rear tyre. Available in a hard “C” and medium “B” compound, with the latter being meant to be comparable to Schumacher’s yellow rubber, the tyres offer a high moulding quality and true running. Along with the tyres comes a line of water-cut foam inserts including standard-size medium and hard foams and an over-size “tubby” medium hard offering.

Source: GRP [grpgandini.it]


October 13, 2014

GRP pre-glued 1/10th touring car tyres

GRP pre-glued 1/10th touring car tyres

Italian company GRP have new pre-glued 1/10th touring car tyres available. The V10 line includes four dry track tyres and one rain tyre with the dry tyres coming in different configurations featuring light cell or medium moulded inserts for best possible performance in a range of track conditions. The medium compound S-28 and S-32 tyres are available with light cell inserts for colder, low traction tracks and also with heavier moulded inserts for grippier, higher temperature conditions, while the softer S-24 and harder S-36 are available with medium moulded inserts only. The S-36 also feature extra stiff wheels to make them ideal for very hot weather conditions. All tyres are of an optimised 64mm diameter with a 6mm high profile for improved handling and best possible steering precision while weighing in at 95g to 130g a set depending on the insert.

Source: GRP [grpgandini.it]


March 28, 2014

GRP 1/5th scale on-road bike tyres

GRP 1/5th scale on-road bike tyres

Italian company GRP introduce their new line of tyres for 1/5th scale on-road bikes. Coming for the front and the rear they offer an optimised design without sharp edges in order to maximise the side bite and traction available. A newly designed carbon fibre reinforced rim does away with the need to run inserts for improved precision and a very true running wheel. A WMS called weight system allows to increase the weight of each wheel by using two, four or six stainless steel rings to up the rotation mass for improved stability and traction on low to medium bite tracks. The tyres are available in a medium, soft and super soft compound pre-glued on two different design wheels or as rubber only.

Source: GRP [grpgandini.it]


March 25, 2014

Updated GRP 1/8th GT & Rally tyres

Updated GRP 1/8th GT & Rally tyres

Italian company GRP have a new 1/8th scale GT and Rally tyre available. The tyre mounts on a new yellow colour rim and features an updated profile with increased radius for increased lateral grip while the lower profile improves stability and steering precision. The tyres come in a total of five different compounds ranging from super-soft to medium and also include a special rain tyre.

Source: GRP [grpgandini.it]


Tonisport
Mibosport
LC Racing
VP Racing
T-Works