Red RC » JConcepts

October 2, 2020

JConcepts RC10B2 carbon fibre front shock tower

The RC10B2, one of the most popular RC vehicles in the mid 1990’s has a new carbon fibre shock tower courtesy of JConcepts. The stock vehicle comes standard with a twin up-right unit which carries all the original geometry, however, it lacks the pizzazz, strength, and appearance that the JConcepts tower can provide. The new front shock tower features a connected tower design with X centre giving that all important strength. It also includes detailed and reinforced areas in the large pocketed area, adding strength in key areas as well as the improvement in material creates a more rigid feel, increasing the response in the front-end.

Source: JConcepts [jconcepts.net]

October 1, 2020

JConcepts Destination hat in heather grey

Having released the original Destination hat back in January, JConcepts have just recently introduced a colour variant for this popular headwear. The distressed heather grey hat with round bill and vent holes has a flashy look. The white rearward mesh provides the professional and breathable look and feel whether you are on the drivers stand or the back 9 at your favourite country club.

Source: JConcepts [jconcepts.net]

October 1, 2020

JConcepts Cush 1.9 – 4.19 OD scaler insert

Different conditions in the scale off-road and crawling scene require different slip and pinch traction and these JConcepts soft inserts can be the missing link at any given moment. The tall and narrower insert fits inside the class 1 size tire like the Landmines and Bounty Hunters and the flat profile provides that scale look. The softness allows a lot of flex to the carcass, lugs and sidewall letting the tire continuously conform to the terrain.

Source: JConcepts [jconcepts.net]

September 30, 2020

JConcepts Mortician body for Axial SMT10

Dig a hole, lay the competition 6’ under with the new Mortician body for the Axial SMT10 and similar vehicles from JConcepts. The converted to panel truck body is competition friendly and uniquely sized featuring the scolding front headlight protrusions. As a racer, front and rear clearance is important for racing and freestyle competition, the Mortician has the submarine outer light pods resting against the tightly compressed nose to look the part. JConcepts created a beak style front-end, large swooping front flares for a racy feel and a very broad and removed centre grille to back up promises of massive carnage. The panel truck cab and roof-over section is flat and to the point, the windshield has a slight V-treatment for realism. Maximum imagination to the masses is what this body shell is all about with the large exposure panel areas. The tall panel section is a bonus, an artboard in a sense to decorate, decal or paint however the user desires. Included in each body set, a clear and heavy-duty polycarbonate body, decal sheet and the paint mask for all windows.

View more images of the Mortician here

September 29, 2020

JConcepts React 2.2″ 2wd & 4wd rear open cell inserts

JConcepts have come with their React 2.2″ 2wd & 4wd rear open cell inserts. One common adjustment made during carpet and turf racing is altering the rear tire insert. One of the recent trends is utilising a narrower rear insert while racing on carpet and turf, which has shown to produce different handling characteristics. The narrower design leaves more room for sidewall plunge providing more side-bite. In addition, the insert is low-profile, tight, and compact so the tire maintains its small shape for quick and nimble transition and acceleration.

Source: JConcepts [jconcepts.net]

September 26, 2020

JConcepts 2.2″ Fling Kings & Renegades Jr tires

JConcepts have introduced two new 2.2″ versions of their well known Monster truck tires, the Fling Kings and the Renegades Jr. Starting with the Fling Kings, they are the first RC Mega Truck tire, specifically designed to throw mud, dirt, gravel and grass just like the real thing. The giant-sized tires are tall enough to dance through the deepest RC loam, however, it is the tall lugs that separate them from the rest. The 1:1 tires were hand-cut to produce the most wicked looking tires on the block ad the JConcepts tires are uniquely built to replicate a hand-cut set, however, deep tread remains to do the “mega” land damage the drivers and enthusiasts crave. One of the most impressive details about the Fling Kings, they are designed for a JConcepts 2.2” wheel, making them aggressive in appearance while the bead of the tire features the traditional 2 step surface which provides a massive amount of area for glue to rest giving the utmost security for full-throttle mud runs. The Fling Kings measure in at 5.50 x 2.5 x 2.2” and are available in both blue and gold compounds and fit directly to JConcepts wheels.

View details about the Renegades Jr tire here

September 16, 2020

JConcepts AX10 / SMT10 transmission motor plate

JConcepts has rolled out a sweet looking replacement motor plate for the Axial SMT10, AX10, SCX10 and Wraith vehicles, or similar models equipped with the AXI30491 motor plate. With the evolution of racetracks, high flying jumps are becoming the normal obstacle and it is inevitable that a driver will have a miscue and challenge the durability of the vehicle. Looking at the typical construction of the second operation processes on standard motor plates, it easy to see why bending is sometimes an issue. The design team at JConcepts has incorporated a honeycomb milling affect with placement more suited to surrounding geometry making the plate lightweight and very rigid in multiple directions. The honeycomb features add a 3D look featuring the natural aluminium while the rest is black anodised. Slight chamfering on the 3mm thickness material allows the rather beefy plate to look slim and trim.

Source: JConcepts [jconcepts.net]

September 14, 2020

JConcepts B6.2 steel front bulkhead

New for the Associated B6.2 comes this steel front bulkhead from JConcepts. A weighty item that is routinely punished is the front-bulkhead on the B6 line of vehicles. While brass material produces a lot of weight it tends to be a little soft as racers bump and grind pipes, jumps and obstacles during a normal outing. With encouragement from Paul Wynn, JConcepts has designed the all-steel front bulkhead to help maintain weight but also significantly improve durability. The steel design helps outlast the brass counterparts and packs the same reversible design for either 25 or 30 degrees of kick-up. The bulkhead has a marked weight (28 grams) and includes the 4 standard countersunk screw pockets and 3mm setscrew offering to pin the hinge pins into place.

Source: JConcepts [jconcepts.net]