Red RC » JConcepts

April 13, 2016

JConcepts RC10T Ford F-150 truck bodyshell

Available soon from JConcepts is the Ford F-150 bodyshell for Team Associated’s vintage RC10T truck. Back in the early 1990’s stadium truck were the next big thing and the RC10T gained massive popularity that still lives on today. Because of this and the ever rising interest in vintage racing, JConcepts have introduced the officially licensed F-150 body. It is narrow and sits close against the chassis to give racers the Team Truck look popular in the 1990’s. The styling is completely modelled after the most popular full-size truck of that era, the 1993 Ford F-150. The entire body shape has been chiselled, incorporating styling cues from the full-scale truck including wheel well shapes, door lines, window outlines and rear tailgate. The front-end sits just behind the front bumper while the headlight and grille area looks strikingly stock and with included decal sheet, looks like its street truck counterpart. The RC10T body is moulded in a durable gauge material and includes rear spoiler, mounting hardware and decal sheet to completely outfit a vintage ride.

View more images here

April 6, 2016

JConcepts Aero car-stand

JConcepts begins 2016 with fresh pit-ware for the 1/10th and 1/8th racing scene. Given to competitors at the Reedy Offroad Race of Champions earlier this year, the Aero car-stand in matte black material stands out in any pit area and supports the vehicle with its unique footing and highly chiseled shape. A rail-like border contains the shape while a deep draw along the sides creates a bold surface for included decal or custom wrap. A “V” step-down feature was added to the ends which brings the styling back down to earth while the void creates added space below the vehicle. A lower stance was built into the design and the smaller foot-print occupies minimal space in the pits. Top load pockets were incorporated as catch-all compartments for body clips, wheel nuts or any small items that are routinely changed during a race event. Triangle cushion pads are positioned on the top to provide support all the way to the edges on any platform vehicle to prevent slippage. JConcepts has included a decal wrap for maximum exposure and presence that resembles the popular chassis tape “Striker” theme.

View another image of the stand here

March 24, 2016

JConcepts Aero lower front wing

JConcepts Aero lower front wing set

New from JConcepts comes the Aero lower from wing for 1/10th 2WD buggies such as the Team Associated B5M and TLR 22 3.0. The lower front wing mounts in a more forward position and is quite easy to trim, use and test without sacrificing all important track time. The front wing features a high-attack design with trim-able rear gurney options. A radical, edgy design which functions and compliments the Finnisher and Silencer body design includes elements and features fresh for the latest off-road conditions. The lower front wing comes in 2-piece sets, is not car specific and can be used on most all 1/10th off-road buggies. Due to customer and team demands, JConcepts has opted to release a genuine 3D printed front mount for the B5M and TLR 22 3.0 vehicle via the company’s Shapeways store. Although not an injection moulded part, the 3D print item should give ample support to drivers wanting to utilise the JConcepts designed parts for a completely matched setup as used by the factory race team.

View more images here

March 23, 2016

JConcepts 1989 Ford F-250 monster truck bodyshell

JConcepts have introduced the 1989 Ford F-250 monster truck bodyshell. The must-have body of the 1980’s was featured on several of the most popular full-size monster trucks during this generation and always proved to be popular among the Ford enthusiasts and always wreaked havoc on the competition. The 1989 F-Series carries over the same body style from the previous generation, yet sports a new rounded front clip that improves vehicle aerodynamics over its predecessors. The softened body lines around the rear of the bed and large fender arches around the wheel wells provides the scale monster truck look. The body features flush-fitting grille and headlights, wrap-around parking lights, a minimalist grille and an accurate and clean-looking Ford/JConcepts decal sheet. The 10.5″ wheelbase and 7″ wide body comes clear and it fits a variety of R/C monster trucks including the iconic Tamiya Clod Buster.

View more images here

March 22, 2016

JConcepts Ford F-150 trail & scale bodyshell

JConcepts have introduced the new Ford F-150 trail and scale bodyshell. Made for 1.9″ Vaterra and Axial trucks the body features signature F-150 details such as bulging wheel arches, a drop-down beltline at the front doors, and some of the biggest snarling grille nostrils ever seen on a truck. The F-150 body is specifically built for the Vaterra Ascender and Axial chassis providing even more versatility to the wildly successful platforms. Made from clear polycarbonate the body comes including a comprehensive decal sheet.

View more images here

February 24, 2016

JConcepts Hybrid 1/8th off-road wing

Seen for the first time at last week’s Dirt Nitro Challenge, JConcepts have now officially introduced the all-new Hybrid 1/8th off-road wing. The pre-trimmed polycarbonate wing formed in heavy-duty material has a hard chamfered leading edge to the side-dams while angular sections blend into the high-performance shape giving a location for that initial step and transition to the wing’s gurney position. At the rear of the wing rest 7 individual ribs which support the wings upper section as it transitions to the gurney and the wing set features injection moulded components which form the Hybrid combination.

Continue reading here

February 16, 2016

JConcepts Bolt 2016 T-shirt & hoddie

New from JConcepts come the Bolt 2016 T-shirt and hooded sweater. Seen for the first time at the recent Reedy Race of Champions the design revolves around the lighting bolt logo. The yellow, blue and white graphic decorates the design while the message of JConcepts.net remains the highest priority front and rear. Both the T-shirt and hoodie are available in adult M to XXXL sizes.

View more images here

February 16, 2016

JConcepts B5 series aluminium shock parts

JConcepts have introduced new aluminium shock parts for Team Associated’s fifth generation 1/10th scale off-road vehicles. First up are the Fin series shock caps with angular bleed hole for correct building procedure and maintenance. The precision machined caps features weight reducing holes positioned about the centre to reduce weight and add to the popular styling. A knurled portion makes for increased grip when fastening or undoing the cap.

Continue reading here