Red RC » JConcepts

September 15, 2015

JConcepts B5 series servo mount bracket

JConcepts have introduced a special servo mount for Team Associated’s fifth generation off-road vehicles. Constructed of billet aluminium and available in either blue or black colors, the part offers benefits over the stock mount configuration. First, the mount fits snug inside the chassis servo mounting area increasing the support across while the two screw mounting locations are beefy in design and zeroed in for a direct mount to that chassis. Second, the bracket has locations on each side for included 3x6mm setscrews to help align and maintain servo position during racing conditions, crashes and hard hits. The set screws are intended to touch-off against the servo case and provide additional support keeping the servo in the intended position which helps maintain consistent steering trim. The servo mount bracket can be installed without any modifications or additional equipment in the 5-series of vehicles, such as the B5, T5 and SC5, and immediately brings peace of mind to the detail-oriented racer.

View more photos here

September 14, 2015

JConcepts HF2 short course bodyshell

JConcepts have introduced their latest 1/10th short course bodyshell, the HF2. Specifically designed for mid-motor SCT trucks, the radical Hi-Flow 2 body has all new elements which take SCT tuning to the next level. With more reliable stability, increased speeds and more cornering ability in the SCT class, the body will effectively lowering the centre of gravity thanks to a low-profile design to further up performance. Air escape details, such as full rear opening capability just behind the cab as well as larger and more open louvers near the tail end of the bed help to fine-tune the body to the driver’s preferences. The wheel wells are an area of focus on the HF2 body with an edgier appeal and pronounced flare to them. The openings allow for more tire clearance throughout suspension travel and also provide a little release of air during high-speed cornering. The rear number plates have been updated to accommodate the lower roof line and also detailed for appearance. As a bonus, the body includes an HF decal sheet for compatibility as well as window mask and customer letter to fill the accessory package.

View more images here

September 2, 2015

JConcepts Finnisher 8ight-T 3.0 bodyshell

The latest off-road vehicle to receive JConcepts’ Finnisher body treatment is the TLR 8ight-T 3.0 1/8th scale truggy. The slight cab forward design, raked windshield and aggressive stance highlight a performance-oriented core while the wide front hood scoop allows plenty of clearance for the unique 8ight-T 3.0 shock geometry. An extended front chin spoiler, headlight and grill protect the front-end from unwanted up-drafts during flight while a built-in air escape passage on the roof allows the customer to fine-tune the body for maximum outdoor performance. The new body includes champion rear name plates which provide additional high-speed stability and the overall handling has been improved by balancing the bias between the cab location and rear wing placement which control the majority of the aero affects of the aggressively styled body.

View more photos here

August 26, 2015

JConcepts MBX7-T Finnisher bodyshell

New from JConcepts come the Finnisher bodyshell for the Mugen MBX7-T 1/8th scale truggy. A drop fit on to the Mugen MBX7-T racing truck the body features a slight cab forward design, raked windshield and aggressive stance highlight a performance oriented core. A wide front hood scoop allows plenty of clearance for the unique Mugen shock geometry. Extended front chin spoiler, headlight and grill protect the front-end from unwanted up-drafts during flight. The Finnisher has a built-in air escape passage on the roof which allows the customer to fine-tune the body for maximum outdoor performance. The new body includes champion rear name plates which provide additional high-speed stability. The overall handling has been improved by balancing the bias between the cab location and rear wing placement which control the majority of the aero affects of the aggressively styled body. As usual it comes made from clear, high-quality polycarbonate, it includes window masks and a decal sheet.

Click here to view more photos

August 20, 2015

JConcepts B5 series Finnisher front & rear wings

JConcepts have a range of new front and rear wing for the Team Associated B5 series of buggies available. First up is the 6.5″ Finnisher rear wing for B5M buggies. The wing features a high-attack design with trimable rear gurney options and it offers a radical, edgy design which functions and compliments the Finnisher and Silencer body design. The wing mounts low on the vehicle allowing for a lower centre of gravity which is important in high-grip conditions. The lightweight wing features reinforcement ribs to increase lateral stiffness throughout the centre while the hi-clearance areas built into the side-dams allow for rear tyre movement and growth. Cut lines are included for easy trimming while wing mount dimples are included for a drop-fit onto the popular B5M vehicle.

Click here to continue reading

August 18, 2015

JConcepts Smoothies for Stadium Truck & SCT

JConcepts Smoothies 1/10th off-road slick tyres are now also available in stadium truck and short course versions. Released as a 2.2” and 3.0”/2.2” bead mounting diameter respectively, the tyres mount straight to the latest generation wheels for that all important reactive feel. The carefully profiled tyre carcass rolls through the turns with efficiency while the maximum smooth surface area grips perfectly on surfaces such as prepped “indoor” clay. The Smoothies include Dirt-Tech grey inserts and are available in gold and green compounds.

View the Short Course variant here

August 17, 2015

JConcepts Striker body for RC8B3

New from JConcepts, the Striker body for the Associated RC8B3. A drop-fit design which wraps the B3’s chassis layout like a glove, the offset of the race proven shell provides a compact fit for fuel tank, linkage and air filter assembly. The heavy channeling on the front windshield and upper cab keeps the Striker aligned at high-speed while the side-pods have multiple hard-edge angles that spill off neatly into 90 degree side-panels. The clear body set includes window templates, decal sheet and is backed by JConcepts’ customer support and racing team lineage.

View more images of the Striker here

July 22, 2015

Malin Karlsen teams up with JConcepts

JConcepts has announced that Malin Karlsen has joined their world-wide race team. Malin, a Norway native who just celebrated her 10th birthday, specializes in 1/10th and 1/8th off-road but really enjoys the fast paced circuits of astro-Turf and carpet. The recent winner of the 2015 Swedish 1/10 4WD National Series has already received high praise and accolades in Sweden where she routinely takes the top step on the podium in her favorite racing class. While attending the 1/8th European Championships in Sacile, Italy, Malin received an award from EFRA acknowledging achievement. JConcepts looks forward to working with Malin and father/mechanic Bent toward future racing goals while representing a host of proud sponsors. Malin and Bent state:

We are extremely happy to be given this opportunity to represent the JConcepts world-wide race team. We are confident that the support provided from such an accomplished manufacturer as JConcepts will be invaluable in Malin reaching her goals. We look forward to be working with the JConcepts racing team and would like to thank Jason and Allison for this opportunity.

Source: JConcepts [jconcepts.net]