June 29, 2015

JConcepts Ruptures 2.2″ crawler tyres

JConcepts Ruptures 2.2" crawler tyres

New from JConcepts comes the Ruptures 2.2″ crawler tyre for vehicles such as the Axial Yeti. The extremely tacky yet versatile tyre offers a layout of individual “large islands” that react to directional and forward loading characteristics like a soft gummy candy. The long horizontal attack bars are connected with solid sidewall detail which braces the sidewall for the high impact situations. The centre “mini islands” help maintain spinning speed and at half height provide some space to sling clean during those dirtier runs. The entire top level of tread has built-in cuts and recesses which provide a sharp edge. A sidewall radial rib connected with a dual position arrow help maintain stability and help the driver squeak out of a tough situation. The carcass itself is extremely pliable which conforms to the vast majority of obstacles. Inside the carcass, the tyre features a connected “Y” loop ribbing design which blends carefully into the sidewall. The bracing supports the lower half of the tire while maintaining the upper flex characteristics. The 154mm tall tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]

June 26, 2015

JConcepts Axial Yeti Vengeance 2.2″ wheels

JConcepts Axial Yeti Vengeance 2.2

Coming from JConcepts and made for the Axial Yeti equipped with 2.2″ tyres are the new 2.2″ Axial Yeti 12mm glue-on wheels. The 8-spoke 1-piece wheel is a smooth design, incorporating a triangle type cut-out of spokes around the centre for heavy street appeal. The design leaves the natural colour of the wheel showing inside the spokes which adds a touch of mystery and depth. In-between the spoke design rests the dividing sections which break up the pattern adding a bit of bite to the overall design. The entire face of the wheel has been plated with a silver coating which gives the Yeti owner a little more luxurious look to match-up to a variety of imaginary looks. Each package contains four wheels, 12mm plastic hexes, wheel adaptors to give the user a front and rear wheel offset and hardware to make the installation complete. The adaptors attach with the included eight, 2.5x8mm screws to provide beefy security. In addition, each wheel includes a solid and open centre cap which are attached with the included eight, 2.5x6mm socket head cap screws.

Click here to view more photos

June 4, 2015

JConcepts Bar Flys 60mm buggy tyres

JConcepts Bar Flys 60mm buggy tyres

JConcepts have a new bar-type 1/10th buggy rear tyre available, the Bar Flys. Based off of the successful Bar Code V1 the newly designed tyre offers a reduced overall tread height and a blended tread/carcass section. In-between the slotted bars, tiny Pressure Point size pins were added for increased surface area. The micro-height of the tread transitions out to the all important side-wall area where the team has maintained position of the original “Cactus” feature but have also positioned a new V-joint feature to support the lateral load of high-speed circuits. The Bar Flys are built on the 60mm bead and carcass design making them interchangeable with all 60mm/2.4″ wheel combinations. The interior ribbing features the double-hatch pattern that helps maintain a comfy ride while each set of tyres includes the Dirt-Tech closed cell inserts. The tyre is available as 2WD front, 4WD front and 2WD/4WD rear variant in various compounds.

Click here to view the other new tyres

June 1, 2015

JConcepts B5 & T5 series aluminium steering rack

JConcepts B5 & T5 series aluminium steering rack

New from JConcepts and made for the Team Associated B5, B5M and T5M is an aluminium steering rack. CNC-machined and replacing the stock plastic piece, the steering rack comes in a blue or black anodised finish and sports machined chamfered silver edges and engraved JConcepts.net logo. The aluminium, light-weight assembly provides a more rigid steering system with increased steering feel and response. The rack includes two thin crush tubes which should be placed in between the bearings in the rack.

Click here to view another photo

May 21, 2015

JConcepts 1.9″ Vengeance trail & scale wheel

JConcepts 1.9" Vengeance trail & scale wheel

The new 1.9″ Vengeance wheel from JConcepts is a perfect complement to the array of 1.9″ trail and scale rig builds, projects and vehicles currently on the market. The 8-spoke wheel design is rather smooth, incorporating a triangle type cut-out about the centre for heavy street appeal. The design leaves the natural colour of the wheel showing inside the spokes which adds a touch of mystery and depth. In-between the spoke design rests the dividing sections which break up the pattern adding a bit of bite to the overall design. The entire face of the wheel has been plated with a silver coating which gives scaler’s a little more luxurious look to match-up to the variety of 1:1 inspired bodies on the market. Each pair of wheels includes a solid and open centre cap which brings even more detail to the wheel. Depending on the desired look or axle length of the vehicle, drivers can choose whichever is best for their individual needs. Moulded in black with a face plating, being unique is worry free as practically any paint scheme can be matched to these new wheels.

Click here to view another photo

May 20, 2015

JConcepts B5M aluminium wing mounts & buttons

JConcepts B5M aluminium wing mounts & buttons

Coming from JConcepts and made for the Team Associated B5M buggy is an aluminium wing mounts and buttons set. The rear wing mount of the B5M vehicle is under a serious load during crashes and inevitable direct landings so JConcepts has beefed up the wing mount area with the introduction of the aluminium mounts specifically designed for this buggy. Made from CNC-machined aluminium and available in blue and black colour, these mounts are designed in a creative but functional way to add rigidity to a high-impact area. A direct bolt-on part adds security, high-end looks and peace of mind for the hard-core basher and racer. Securing the wing to the mounts is made easy with the included Finnisher style aluminium wing buttons which accept a 3mm flat head screw. The use of these parts in conjunction with JConcept’s optional aluminium wing shim adds durability and a direct clamp to the assembly. The added boss on the wing mounts also aligns the pre-cut B5M Hi-Clearance wing perfectly for a show quality look, fit and finish.

Click here to view more photos

May 19, 2015

JConcepts ZX6 Silencer bodyshell

JConcepts ZX6 Silencer bodyshell

The latest vehicle to receive the JConcepts Silencer bodyshell treatment is the Kyosho ZX6. The body features a profiled, Finnisher stance cockpit and forward raised side-pod to give the Silencer an immediate fighting appearance. A smooth, high-speed transition around the cab keeps the body heading in the right direction and a slight recess just behind the cab with channelling out the rear provides rear-end stability. The Silencer side-pods have a clipped rear-end, narrowing the rear by angling in just in front of the rear tyres. The rear side-pods angle sharply toward the shock tower and wing, enhancing the force placed on the rear pods during high-speed acceleration. The body is capped off with a cockpit shark fin for more high-speed tracking stability and increased roof stiffness. The package includes two 6.5″ Hi-Clearance wings pre-marked for the ZX6 for the easiest application.

Click here to view more photos

Tonisport
Mibosport
LC Racing
VP Racing
T-Works