Red RC » JConcepts

March 25, 2015

JConcepts Mono & Bullet disc wheels

JConcepts introduce the new Mono wheels for the front of the TLR 22-4 buggy as well as the Bullet 4.0″ 1/8th truck wheels. Starting with the 1/10th wheels, they are designed in the popular dish style and available in bright white and fluorescent yellow. They offer the maximum size allowed under ROAR rules and make a statement with their large appearance, flat dish shape and inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. The wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.

Click here to continue reading

March 24, 2015

JConcepts T5M chassis decals & titanium turnbuckles

JConcepts have new accessories for the Team Associated T5M stadium truck available in the form of chassis protective sheets and a 6-piece titanium turnbuckle set. Starting with the chassis decals, the pre-cut stickers come in sets of two and they not only protect the chassis bottom from becoming excessively scratched but they also decrease friction between the chassis and the dirt surface.

Click here to continue reading

March 23, 2015

JConcepts B44.3 carbon fibre option parts

During the 2015 Reedy Race of Champions, JConcepts debuted the B44.3 carbon fiber front and rear top deck, servo and battery brace. This carbon fiber parts set is unique in looks, tough in durability and contributes to tuned flexibility which leads to a better handling vehicle. The top decks feature slotted locations which were added to free up the rigidness of the vehicle. More flex will contribute to a more confident driver who wants a more flowing drive out of the vehicle. In addition, the antenna mount was removed from the front top deck and placed on a new and included servo deck piece. The new position of the antenna mount is perfect for the popular servo mount location as well as convenient for the receiver and antenna wire. For racers choosing the new Silencer B44.3 body it also pulls the antenna mount out of the cab area and places it down on the side pod area similar to a 2WD buggy, cleaning up the entire look of the vehicle. To finish, JConcepts has included a matching battery brace along with hardware to directly fasten the battery in place for complete security. All carbon fiber parts are designed by JConcepts, produced with genuine 2.5mm material and machined to perfection.

Click here to view another photo

March 20, 2015

JConcepts Dirt Racing Products B5 Ti turnbuckles

New from JConcepts’ Dirt Racing Products brand comes a “Cool Grey” titanium turnbuckle set for the Team Associated B5 and B5M buggy. The JConcepts Fin turnbuckle is the base design which is centered around a .143″ titanium hex size that gradually tapers down into a 3mm thread base design which accepts standard AE ball-cup configurations. Custom anodized by Brian Kinwald himself, the Dirt Trick “Cool Gray” turnbuckles are individually colored a unique Gray color which adds an undeniable personalized touch to any vehicle. The Dirt Racing Products turnbuckles are produced with left and right hand threads with the left being conveniently marked for easy orientation.

Click here to view another photo

March 19, 2015

JConcepts Finnisher T5M bodyshell

JConcepts introduce the Finnisher bodyshell for the Team Associated T5M stadium truck. The slight cab forward, raked windshield and aggressive stance highlight a performance oriented core. A revised front hood scoop allows plenty of clearance for the T5M geometry while smoothing out the front down force area. A front chin spoiler, headlight and grill protect the front-end from unwanted up-drafts during flight and like the ROAR National Champion Hi-Flow SCT body, the Finnisher body has built-in air escape passages which allow the customer to fine-tune the body for maximum outdoor performance. The body includes the high performance gurney spoiler which increases rear grip and balances the handling characteristics of the aggressively styled body.

Click here to view more photos

March 4, 2015

JConcepts Ford Atlas SCT bodyshell

JConcepts introduce the Ford Atlas SCT Absolute Scaler bodyshell. Specifically built for the Traxxas Slash and Slash 4×4 chassis it provides even more versatility to the wildly successful platforms. Fitting bumper to bumper, the body has all the possible detail of its full-scale counterpart starting behind that outsized grille. Split headlight design with corner reveal turn signal points the Atlas in the right direction while edgy hood detail bulks around the fenders to provide plenty of clearance for an assortment of SCT tyres. The extra cab look is defined by the recessed windows and the roof has a unique centre channel and extruded touches emulating the roof-carrying system shown on the prototype Atlas vehicle. The bed and fender area maintain a couple features that pique interest including sculpted out areas which look the part of the tie-downs on cargo walls and bed floor which are so commonplace in today’s pickup trucks. The Atlas includes a decal sheet for headlight, taillight with Ford and Atlas logos throughout. Decal trimmings include miscellaneous JConcepts logos, door handles, exhaust tips and running lights.

Click here to view more photos

February 27, 2015

JConcepts B44.3 Silencer bodyshell

The latest vehicle to receive JConcepts’ Silencer bodyshell treatment is the Team Associated B44.3 4WD buggy. The Silencer sports a special design aimed at today’s high-speed tracks with a profiled, Finnisher stance cockpit and forward raised side-pods. A smooth, high-speed transition around the cab keeps the Silencer heading in the right direction while a slight recess just behind the cab with channeling out the rear provides rear end stability. The side pods have a clipped rear end, narrowing the rear by angling in just in front of the rear tyres. The rear side-pods angle sharply toward the shock tower and wing, enhancing the force placed on the rear pods during high-speed acceleration. Included with the body come two 6.5″ Hi-Clearance rear wings, window masks a decal sheet.

Click here to view more photos

February 25, 2015

JConcepts Scorpios 1.9″ all-terrain scaling tyre

JConcepts Scorpios 1.9" all-terrain scaling tyre

Following the Ruptures 1.9″ performance scaling tyre JConcepts also introduce the Scorpios, an all-terrain variant. It features scale looks and extra tall size and profile with a closely knit tread resembling a 1:1 scale tyre. The padded arrangement of tread makes the tyre ideal for transitioning from the hard road to dirt and then into rocky and uneven terrain. Once power is applied to the vehicle, the tread spacing opens up which allows for some deep digging making it a great working tyre in dirt and muddy conditions. Each tread block has finely cut edges with a healthy radius where the block meets the tyre body. Each block features slight cuts on top to open up and create some sling space while the outer most lug extends down the sidewall to stiffen the upper carcass and increase the pinch grip. The flexibility of the compound combined with the close arrangement gives the tire a grippy feel but still maintains that all important look. The large overall height provides plenty of ground clearance for an abundance of terrain and internal grid ribbing help maintain its upright structure during hard loads and on power bursts. The tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]