Red RC » JConcepts

October 24, 2013

JConceots 6.6″ Hi-Tension wing

JConceots 6.6" Hi-Tension wing

JConcepts introduce their new 6.6″ wide Hi-Tension wing specially designed for mid-motor buggies. Mid-motor buggies are all the rage in competitive off-road racing and when compared to rear motor vehicles, have a slightly different rear wing placement. JConcepts has stepped up to offer a replacement Hi-Tension wing for drivers utilising the mid-motor option and released a specific wing for the application. The more aft position of the mid-motor wing allows more tyre clearance than normal. The wing also features redesigned the side-dams to accommodate this position and it comes with a flow-through feature in the form of a small angular plane which can be trimmed for a slot which air can pass during racing conditions. In addition, the actual vertical side-dam now has a profiled shape near the bottom, tightening the section and also increasing the stability of the side-dams. Although specifically designed for mid-motor applications, the new wing works also great on 2WD rear motor vehicles as well as 4WD buggies.

Click here to view another photo

October 23, 2013

JConcepts B44.2 X-Flow body

JConcepts introduce the X-Flow Finnisher body shell for the Team Associated B44.2 buggy. The body that was used by Steve Hartson during his World Championship winning campaign features a revamped design with additional air-flow relief areas which impact the motor and speed controller directly in order to lower the component’s temperatures for improved performance. The Finnisher-based X-flow has deeper pockets near the front of the side-pods and just behind the cab which allow cut-out options and it is a direct fit on all B44.2 buggies. Included with the body come two 6.5″ wide Hi-Clearance rear wings.

Click here to view more photos

October 17, 2013

JConcepts B4, T4 & SC10 front suspension brace

New from JConcepts comes this front suspension brace for Team Associated B4, T4 and SC10 vehicles. The all aluminium machined and anodised brace is spot on in terms of geometry, fit, finish and position. The tightened design eliminates extra bulk and weight with deep cutouts. As a bonus the new front suspension brace is designed around and includes a heavy-duty 4-40 x 5/16” button head screw instead of the stock 2/56 screw set. The part is a direct fit and available in blue or black colour.

Click here to view another photo

October 17, 2013

JConcepts aluminium shock bottom pivot balls

Made for many Team Associated 1/10th off-road vehicles is this aluminium pivot ball set from JConcepts. The CNC-machined and blue anodised lower pivot balls are of a serrated design to twist into the plastic for a more secure shock fitment even when the going gets tough. The rear part features an extended standoff to move the shock further away from the turnbuckle allowing additional clearance. 4 pieces are included per package including 2 standard front pivots and 2 of the extended, serrated pivots and longer screw for the rear with the balls being available in blue or black colour.

Click here to view the colour variant

October 7, 2013

JConcepts C4.2 Finnisher body

JConcepts introduce the Finnisher body shell for the Centro C4.2 conversion. The body is of a tightened design, slimming the overall look of the buggy and it sports a smoother high-speed transition with increased airflow making it ideal for high-speed circuits. A centre roof channel improves stability and increases roof stiffness while double side windows create a new look and a small scoop improves motor cooling. The body comes including two 6.5″ Hi-Clearance wings, window masks and decal sheet.

Click here to view more photos

October 3, 2013

JConcepts TLR 22 front axle conversion

JConcepts introduce the front axle conversion for the TLR 22 line of vehicles. A critical point of the conversion revolves around the front axle and surrounding geometry with the goal to convert the front axle to a more user friendly design. The conversion includes two front high-grade steel axles with incorporated wheel hex and threaded shaft allowing the use a traditional 4mm lock-nut instead of the stock screw type design. A low-profile, aluminium 4mm locknut has been included which features an inner serrated surface which grips the wheel when tightened for locking security. This design can easily be installed on the 22 buggy line of vehicles including the newly released TLR 22 2.0.

Click here to view a photo of the axle installed

September 13, 2013

JConcepts Nissan Armada SC body

New from JConcepts comes the radically looking Nissan Armada short course truck body. The exterior of the Armada is built to cater to racer demands. Aggressive, high-impact headlight and grille treatment has an unmistakable straight-on look. Included in the front hood design are reverse louvers which are built-in to allow two air-escape passages. The famous Nissan fender treatment has an additional raised section which allows plenty of front tire clearance under load. The raised section is double purpose and also functions as an additional air escape feature while the low-profile roof line helps maintain a low centre of gravity allowing the SUV to transition the turns like a JConcepts heritage truck design. Two, rear, easy to trim, Hi-Flow cut-outs chiseled between the SUV rear windows along with upper access for ream-able hole cut-outs complete a polished air release package. The body comes with decal sheet and window masks and is a direct fit on Slash, SC10, XXX-SCT, SCT-E and SCT 410 trucks with others may fit with additional trimming.

Click here to view more photos

September 11, 2013

JConcepts RB6/RT6 aluminium steering bellcrank set

JConcepts have a new aluminium option part for the Kyosho RB6 and RT6 available in the form of a steering bellcrank set. The servo saver-less aluminium steering system is CNC-machined and replaces the stock plastic levers with a more rigid solution for improved steering feel and response on high grip surfaces. The fit of the new bellcranks has been improved to help eliminate binding when assembled and the parts are available in blue or black colour.

Click here to view more photos