Red RC » JConcepts

June 3, 2013

JConcepts TLR22 & 22T / 22SCT front shock towers

JConcepts have released new 4mm carbon fibre front shock towers for the TLR 22 and 22T / 22SCT. The design team has pin-pointed the exact geometry locations of the front shock tower and designed a durable and lightweight option part that is a direct bolt-on for the front-end of the popular TLR vehicles. The shock tower is 4mm in thickness and features all the stock mounting geometry in a more compact package. Reinforcement ribs have been added where needed for additional strength and mounting hardware has been included for a secure hassle free attachment. Additionally, the replacement front truck tower includes a 2.5mm locknut for body mount attachment.

View the 22 buggy shock tower here

May 31, 2013

JConcepts Nissan Titan SC body

JConcepts have introduced the Nissan Titan to their lineup of championship winning Short Course bodies. The exterior of the Titan is built to cater to racer demands with aggressive, high-impact headlight and grille treatment has an unmistakable straight-on look. Included in the front hood design are reverse louvers which are built-in to allow 2 air-escape passages and the famous Nissan front fender treatment has an additional raised section which allows plenty of front tire clearance under load and also functions as an additional air escape feature. The high-performance body has a 1:1 inspired extra-cab with black-out decal to give that elusive side view. A low-profile roof line helps maintain a low center of gravity allowing the truck to transition the turns like a JConcepts heritage design while the bed of the truck is packed with all the Hi-Flow features that have become synonymous in the industry. 2 upper easy to trim Hi-Flow cut-outs chiseled between the built-in and extremely durable number plates combine with the dual channeled air-out spoiler at the base, to finish off a polished air release package.

View more details and images here

May 30, 2013

JConcepts RB6 Monroe battery brace & FR shock tower

New for the RB6, the Monroe battery brace by JConcepts is highly functional and aesthetic eye-candy, designed from genuine 2.5mm carbon fiber. With so much variety in today’s batteries and with most vehicles having a flexible mounting position forward and aft, functionality is always a top priority. With the Monroe battery brace, running different battery positions is possible while maintaining the necessary terminal clearance and providing a healthy holding force to keep everything intact even in the most demanding conditions or the inevitable crash. Also new for the RB6 is this 4mm carbon fibre front shock tower. A lightweight, durable and high-grade option for the popular vehicle, JConcepts has located and plotted the exact geometry locations while trimming the outer border of the tower in a low-profile and slim configuration. Additional reinforcement ribs have been added where needed for extra strength. The front tower includes front 4 – 3x10mm mounting screws for a secure hassle free attachment.

View the front shock tower here

May 23, 2013

JConcepts Finnisher Tekno EB48 body

The second Finnisher release of the week from JConcepts this time for the popular Tekno EB48. Almost identical to previously released versions in this body series there is an increased windshield angle that provides a steady force upfront during in-flight wind gusts on large jumps while a forward cab placement changes performance / visible bias which helps steering rotation in low traction corners. A slightly channeled roof-line helps stabilize the vehicle at high-speed while the side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. The chassis to body fit has been tightened up which eliminates empty voids that contribute to mid-flight directional changes rear of the cab has a new step feature which allows the placement of a secondary side window and also a louver which can be trimmed to allow air to escape at the top of the body.

Source: JConcepts [jconcepts.net]

May 22, 2013

JConcepts Black Jackets & Stackers truck pre mounts

JConcepts have extended their pre-mounted truck line to include Black Jackets & Stackers. The Black Jackets, constructed from very small square pins, provide additional grip on loose conditions with a light amount of dust and debris across the surface. The tread spacing near the outside rows are slightly open allowing maximum flexibility to adhere to smooth and slick surfaces providing a reasonable flex contact patch. The Stackers reveal a heavy center lug design which are supported at the lower base with extra rib features and tiny fillets which provide a heavy forward gripping force. Directional slashes cut into the tread soften the lugs to absorb bumps and also increase the lug flexibility to accommodate loose conditions. Both are available in green compound on white or yellow Elevated wheels.

Source: JConcepts [jconcepts.net]

May 21, 2013

JConcepts Finnisher for Agama A8 Evo

Further expanding their line of Finnisher bodies, JConcepts have made their popular body shell available for the Agama A8 Evo. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps while the forward cab placement changes performance / visible bias which helps steering rotation in low traction corners. A slightly channeled roof-line helps stabilize the vehicle at high-speed while the side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. The chassis to body fit has been tightened up which eliminates empty voids that contribute to mid-flight directional changes rear of the cab has a new step feature which allows the placement of a secondary side window and also a louver which can be trimmed to allow air to escape at the top of the body.

View more images of the body here

May 16, 2013

JConcepts B44.2 aluminum bulkhead cap

New from JConcepts comes this replacement bulkhead center cap for the famous B44.2 buggy kit. The machined aluminum component, anodized in blue, is a handy replacement for the stock plastic unit and is a drop-on to the center slipper assembly. With the motor mount and bulkhead as one assembly in the B44 vehicle, temperatures peak out and transfer through the entire center assembly allowing the new cap to act with heat-sink capability. The stout design with external ribbing has increased strength over the plastic unit, is symmetrical in design and adds a higher level of detail and aesthetic appeal to an already championship vehicle.

Click here to view the mounted part

May 14, 2013

JConcepts metric washer set

Small adjustments matter when it comes to competitive racing and JConcepts is on top of the small adjustments with the release of this metric washer set. These washers are perfect for roll-center adjustments on 1/10th scale vehicles and are also extremely handy for shimming suspension components or common wheel base adjustments. The (.5, 1, 2 and 3mm) washers are constructed in aluminium, anodized blue and include 4 pieces of each thickness per package.

Source: JConcepts [jconcepts.net]