Red RC » JConcepts

April 3, 2013

JConcepts off-road wing buttons

New from JConcepts come aluminium wing buttons for 1/8th off-road vehicles. Specially designed for all screw-in wing mounts the machined aluminium design with durable outer rim and stylish hex design offers a bit more security over traditional plastic wing buttons. The buttons incorporate through-holes and notched hexes which make it light-weight and strong in all the important areas. The attachment area has an already built-in countersunk feature which allows for the cleanest assembly possible and the buttons are available in blue and black colour.

Click here to view the colour variant

April 1, 2013

JConcepts Finnisher body for XB4

JConcepts have released a Finnisher body for the new Xray XB4. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance / visible bias which helps steering rotation in low traction corners. The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. The chassis to body fit has been tightened up which eliminates empty voids that contribute to mid-flight directional changes. The rear of the cab has a new step feature which allows the placement of a secondary side window and also a louver which can be trimmed to allow air to escape at the top of the body. In addition to the newly designed body, JConcepts has included 2 of the latest 6.5″ wide Hi-Clearance rear wings.

View more images of the body here

March 29, 2013

JConcepts Escape body for SC10B

Introducing the Escape body by JConcepts, specifically designed for the newly released Team Associated SC10B vehicle. Breaking into the world of Short Course buggy racing, JConcepts has stepped up with the first aftermarket body designed around the new high-energy vehicle. The first thing noticed on the Escape is its narrowed front-end which tucks nicely against the chassis geometry. The increased front tuck tightens up the large gap in-between the chassis and stock SC10B body making the Escape a superior jumping body with its first heavy detail. Just above the tucked portion, in front of the cock-pit area, rests a reverse scoop giving an area to trim for more air-relief. A small ledge entering the cab guides the air slightly further than the original body while the main side-pods have chiseled ducts which wrap around the bolt-on plastic caging. Just behind the roll-cage area, number plates are built into the body giving the body a slightly raked look and appropriate place for small racing numbers.

View more details & images here

March 28, 2013

JConcept precut chassis protective sheet

A high-end item used for many years on the performance side of R/C racing is the chassis protective sheet. For years, drivers have hand-cut and fitted their chassis with a clear material protecting the new chassis look and also providing a smooth or slick surface to decrease friction between chassis and dirt surfaces. JConcepts has hit the easy and glamor button at the same time and is now offering a precut and graphically pleasing chassis protective sheet for the most popular 1/10th off-road vehicles on the market. With 2 pieces included per package, the durable and low-resistance material fits each chassis layout like a glove and adds protection and style in one easy package. Available for the Associated B4.2, T4.2, B44.2, SC10, SC10B, TLR22, 22T, 22SCT, RB6, ZX5 FS2, DEX210 and DEX410.

Source: JConcepts [jconcepts.net]

March 25, 2013

JConcepts radio bags

JConcepts introduces the radio bag designed with travel, cushion, ease of use and protection in mind. The lightweight design consists of a rugged outer bag which has a convenient and easy access zipper closure and inside has a Velcro closure pouch for additional easy access items. Inside, a high-density, form fitted foam, pre-cut for your radio of choice cushions all sides of your pricey possession while a lower stage foam insert cushions the bottom. The bag is travel friendly and sized to fit inside most luggage or racing carrier bags. JConcepts Striker logo and graphic imagery is printed on the outside for the most authentic look. Available for the M11X, M12, 4PK, DX3R Pro and MT4.

View more images of the radio bag here

March 13, 2013

JConcepts AE titanium turnbuckles

JConcepts introduces a stylish, durable and lightweight alternative Titanium turnbuckle kit for the popular Team Associated vehicles. The base of the shafts design is centered around a .143” titanium hex size which gradually tapers down into a 3mm thread base design which accepts standard JC and AE ball-cup configurations. The focus of the styling surrounds the lengthened adjustment hex area and the ‘finned’ cuts that rotate about the center. The fin turnbuckles are lightweight and the original design brings out the glamour and quality that makes titanium one of the most sought after exotic materials in the world. The JConcepts turnbuckles are produced with left and right hand threads with the left being conveniently marked for easy orientation. The suitable JConcepts turnbuckle adjustment wrench is offered separately.

Click here to view the other new parts

March 5, 2013

JConcepts Pressure Points for 1/10th buggy

JConcepts’ new Pressure Points are the latest low-height tread option specifically designed to tame high-speed courses with either wet or blue groove traction conditions. The design starts as an angular, low pin design as a carryover from the successful Bar Codes front tire line-up. The small “points” combined with “lower case” Y elements developed on the original Bar Codes V1 rear tire provide the ultimate in surface area “pressure” penetration and tack. The inner carcass and side-wall has built-in ribbing which limits carcass collapse and increases support on the outside during hard cornering and driving. The new inner ribbing, combined with the included JConcepts insert, is a perfect match to provide the ultimate in support, traction and consistency. The Pressure Points are designed to be driven hard while maintaining the grip necessary to drive at the limit. The edges of the side-walls have been carefully rolled for a smooth transition during cornering which limits traction-roll characteristics and allows the driver control during the all important tipping point every driver has experienced. Available in blue, green and gold compounds.

Source: JConcepts [jconcepts.net]

March 5, 2013

JConcepts 7″ Hi-Clearance wing

JConcepts 7" Hi-Clearance wing

JConcepts has released a 7” wide version of their popular hi-clearance wing introduced to competition during the recent Reedy Race of Champions. A slightly wider base gives the wing a larger surface area which allows more stability during low and high speeds which provide some much needed grip in tricky situations. The Hi-Clearance sections near the end plates still allow maximum suspension compression and tire expansion.

Source: JConcepts [jconcepts.net]