Red RC » Kyosho

July 20, 2018

Kyosho Ultima RB7 1/10th 2WD off-road buggy kit

Kyosho have released first information and images of their forthcoming Ultima RB7 1/10th 2WD buggy kit. The buggy builds on a newly developed 7075 aluminium chassis that is 4mm shorter than the previous RB6 main plate for improved cornering and optimised flex characteristics. Also new is the front suspension with gullwing-type front arms for more accurate damping while improved front knuckles and hubs with updated Ackermann locations and reinforcements ensure a proper front end geometry and better durability. Multi-configuration arms with bushings for long and short settings can be found on the rear as can be alloy rear suspension mounts. Other features include a lowered carbon-reinforced front shock stay, a new wing mount, an updated centre mount as well as shorter spring cups for high-grip surfaces that require the running of very low ride heights while plastic shock caps help to settle the buggy on bumpy surfaces. Last but not least are ring-captured universal swing shafts, and a newly-designed body shell and wing.

View more images here

July 16, 2018

Leadfinger Racing A2 Tactic MP9 TKI4 body shell

Now available from Leadfinger Racing is the newly updated A2 Tactic body for the Kyosho Inferno TKI4 nitro buggy. The A2 body design for the MP9 TKI4 is the second generation to the original Assassin. Track conditions can have a drastic change over long race weekends, making the A2 the perfect choice for added tuning as the sleek and aggressive styling gives an all around balanced feel.The windshield has been given less rake then that of the original Assassin, easing steering slightly. Additional height has been taken out of the cab and widened front to rear, helping to lower the centre of gravity, and giving the car a more planted feel. The rear swoop behind the cab has also been lowered, with additional down force added to the top of the side pods. Bump outs have been added for throttle linkage and fuel tank clearance. The A2 body for the Kyosho TKI4 is made of thicker lexan, comes clear and ready for paint with window masks and stickers provided.

View more images here

July 12, 2018

T-Works MP9 TKI4/3 1-piece engine mount plate

Coming from T-Works and made for the Kyosho MP9 TKI4 and TKI3 buggies is a 1-piece engine mount plate. The part is designed to replace the standard 2-piece mount for a sturdier and cooler looking item. The plate improves precision while adding a bit of reinforcement to the engine area which can be useful on smooth high-bite tracks. The black anodised 7075-T6 alloy plate sports machined silver edge details and it comes with a set of gold-colour steel screws.

View another image here

July 11, 2018

Kyosho Mad Series welded steel roll bar sets

Coming from Kyosho and made for the EP and GP Mad Series monster truck kits are welded steel roll bar sets. The parts add cool looks and a bit of protection to the chassis and body area with the sets, that are available separately for the electric and gas-powered vehicles, include a roll bar each for the Mad Crusher and Mad Force Kruiser. Also included are side roll bar mounts and suitable hardware but none of the additional lights visible in some of the images.

View more images here

July 3, 2018

Kyosho Inferno MP9e Evo 1/8th E-Buggy kit

Kyosho Europe have released first images of their forthcoming Inferno MP9e Evo 1/8th electric buggy kit. The vehicle builds on the successful, 8-times World Championship-winning MP9 and MP9e platform but features a redesigned chassis layout with a very forward-moved weight bias as components such as the steering servo, radio box and speed controller are located towards the front axle while the motor is now in a mid-ship position. The highly regarded flat control and aerial posture of the previous model has been maintained while a forward weight shift has improved balance for optimised handling. In addition, subtle changes to the battery mount create a lower centre of gravity that combines with the race-tested body design of the MP9e Evo to deliver superior cornering, traction, and rough surface performance required of a racing buggy to perform successfully at the highest level. The kit features the front and rear suspension and drive systems from the latest Inferno MP9 TKI4 10th Anniversary Special Edition and the layout of the A7075T6 hard anodised aluminium chassis fas been specifically designed for the MP9e Evo to optimise weight distribution for electric power performance and a lower centre of gravity.

Continue reading here

July 2, 2018

T-Works MP9 metal diff internals

T-Works have introduced a set of specially coated metal gear internals for the MP9 TKI4 and TKI3 differentials. Each set contains six gears as well as pins and shims and using the parts will reduce overall wear while offering a smoother diff action thanks to the gear’s slick surface coating. One set contains parts for one differential meaning it need three sets to equip a full kit.

Source: T-Works [rc-tworks.com]

June 29, 2018

Kyosho tease updated MP9 E-buggy

Kyosho have released a first official teaser image of their forthcoming new Inferno MP9-based 1/8th electric buggy kit. Currently in use at this week’s 2018 Alabama Manufacturer Shootout race in Cullman, Alabama, in the hands of Jared Tebo, the buggy is expected be fully unveiled next week. While sporting a new radical body shell design with a rear shark fin, the buggy is also expected to feature a totally new weight distribution. We bring you more details on the kit as they become available.

Source: Kyosho [kyosho.com]

June 27, 2018

T-Works MP9 hard-coated alloy brake cams

T-Works have introduced their new hard-coated aluminium brake cam set for the Kyosho MP9 TKI3 and TKI4 kits. The items replace the standard steel cams for lighter parts in order to scrub some weight. Included with the cams come two grub screws and the set is available now.

Source: T-Works [rc-tworks.com]