Red RC » Kyosho

March 24, 2014

JConcepts Ultima RT6 RM Finnisher bodyshell

JConcepts introduce the Ultima RT6 RM Finnisher bodyshell for Kyosho’s 2014 Cactus Classic winning 1/10th stadium truck. Based off the T4.1 Finnisher, the RT6 compatible variant has been updated to include pre-dimpled locations for the RT6. A revised front hood scoop allows plenty of clearance for the unique RT6 geometry while smoothing out the front down force area. Front chin spoiler, headlight and grill protect the front-end from unwanted up-drafts during flight while, like the ROAR National Champion Hi-Flow SCT body, the Finnisher body has built-in air escape passages which allow the customer to fine-tune the body for maximum outdoor performance. The body includes the high performance gurney spoiler which increases rear grip and balances the handling characteristics of the aggressively styled body.

Click here to view another photo

March 24, 2014

Kyosho Scorpion B-XXL VE & Nitro ReadySet kit

Kyosho Scorpion B-XXL VE & Nitro

Seen for the first time at this year’s Nuremberg Toyfair and available now is Kyosho’s gnarly looking Scorpion B-XXL VE 2WD large scale buggy. The 640mm long vehicle is based off the Scorpion XXL dune buggy and features a 3mm aluminium chassis with sturdy, reinforcing side frames, long A-arms with large volume oil-filled shock absorbers, adjustable suspension components, and a fully ball-raced drivetrain with adjustable slipper clutch and fluid-filled gear differential. The buggy is powered by a genuine Team Orion drive set in the form of a water-protected Vortex XXL brushless speed controller and a Vortex Seven Monster brushless motor. The factory assembled buggy also comes with a KT-201 2.4GHz radio system, pre-installed high-performance steering servo, pre-finished buggy body with inner mud and splash guards as well as grippy off-road tyres on headlock rims. Not included is a 4S LiPo battery pack, batteries for the radio and a charger. From April the vehicle also comes in a nitro-powered version with a 5.4cc engine and a large volume 200ml fuel tank that allows for a running time of around 15 minutes per tank.

Click here to view more photos

March 22, 2014

DE Racing MP9 & D8’12 BumpSkids

DE Racing MP9 & D8'12 BumpSkids

DE Racing has just expanded our line of BumpSkids with new models for the Kyosho MP9 TKI3 and Hot Bodies D812. The Kyosho BumpSkid was designed to work with the thicker front hinge pin plate that was adopted at the 2010 Worlds and now standard on the TKI3. The Hot Bodies model complements the factory rear skid plate for complete chassis protection. Also new from DE Racing is a mud guard for the Hot Bodies D812 that attaches to the rear arms using factory holes.

View the D8 Bumpskids & mud guards here

March 20, 2014

Kyosho 69 teeth 48 pitch spur gear

Kyosho America introduce a 69 teeth 48 pitch spur gear for the use in stock and spec brushless classes. The smallest spur gear to fit the current 1/10th slipper clutch allows the lower ratios typical for this type of racing and it is made from high-quality composite material for low weight, high strength and low running noise.

Source: Kyosho [kyoshoamerica.com]

March 18, 2014

Hiro Seiko EX-1 KIY lightweight screw kits

Hiro Seiko introduce a new lightweight screw kit for KO Propo’s EX-1 KIY radio. The 7075-T6 aluminium screws save around 10g of weight and add a splash of colour to the transmitter as they are available in black, red, Tamiya and Yokomo blue as well as in purple anodising.

Source: Hiro Seiko [hiro-seiko.com]

March 14, 2014

DE Racing TLR, Kyosho & Durango SpeedLine wheels

DE Racing release a few additional wheel offsets to their already extensive catalog of SpeedLine wheels. Offsets include front wheels for the new TLR 22-4, front wheels for the Kyosho Laser ZX-5, and front and rear wheels for the Team Durango DEX210 and DEX410. The Team Durango DEX410 wheels are also designed to work with the Xray XB4. This initial release will be in white and yellow with more colour options to follow.

Click here to view the other new wheels

March 14, 2014

New design Kyosho Inferno MP9 engine mount

Kyosho’s nitro off-road mastermind Yuichi Kanai introduced this new engine mount for the Kyosho MP9 1/8th off-road buggy. Instead of using two separate base plates the new mount is of a 1-piece U-shaped design which is understood to help with stability and rigidity while the engine itself is still mounted using spilt mounting blocks. The gun metal anodized part comes laser-etched and will become available from end of April.

Click here to view more photos

March 12, 2014

Revolution Design RB6 slipper plate set

Revolution Design Racing Products introduce the RB6 Slipper Plate Set for Kyosho’s RB6 2WD buggy and RT6 2WD stadium truck. The plates are CNC-machined from 7075-T6 aluminium, come hard anodised and with a hardcoated surfaces for added rigidity and super long life. Being of a vented design they make for a more consistent and reliable slipper action in every racing condition. They sport laser-etched RDRP logos and are available now.

Click here to view a photo of the parts in place