Red RC » Much More

August 26, 2016

Muchmore Fleta Pro V2 brushless speed controller

Coming soon from Muchmore is the Fleta Pro V2 brushless speed controller. The upgraded ESC features the all-new Flow-Max2 aluminium heatsink case that now only improves heat dissipation but it also allows to route the receiver and switch wires on the left or right hand side of the case, depending on the preferred layout. Additionally the on/off switch is now of a plug-able design, allowing to use it or to leave it away – the latter leaves the controller permanently switched on. The option of dropping the switch makes for an overall cleaner wiring while also eliminating a possible error source. Also new with the V2 is the ability to use a fan extension wire to power an additional motor fan without soldering it to the battery terminals and on top of this the speedo now supports HV servos by offering a powerful 6V/7.4V 8A BEC system.

View the specifications here

August 17, 2016

Muchmore Impact Linear LCG 5200mAh 4S LiPo battery

Coming from Muchmore is the new Impact Linear LCG FD2 5200mAh 14.8V LiPo battery pack. Offering a reduced height of 36mm the 4S pack is build from high-performance 110C cells for high power output in demanding racing conditions. The lower height compared to standard 4S packs makes for an overall lower centre of gravity, resulting in faster cornering of both off-road and on-road cars. The pack comes pre-wired with 10AWG wire, a T-type plug and an XH balancer connector.

Source: Muchmore [muchmoreracing.net]

June 13, 2016

Muchmore Fleta ZX modified linear power rotor

Muchmore have introduced the new 12.3x5x25.3mm D-magnet modified linear power rotor for the Fleta ZX range of brushless motors. Specially designed to give milder bottom end torque but improved mid-range power the rotor is ideal for touring cars but also all other applications where an easy driving feeling is helpful.

Source: Muchmore [muchmoreracing.net]

June 3, 2016

Muchmore Hybrid Touch AC/DC balance charger

Muchmore have introduced their new Hybrid Touch AC/DC balance charger. Offering a compact design and a light weight the device is ideal for crowded pit spaces or RC travelling, without cutting on features or performance. With its 80W charge power it allows for up to 10A of charge current at both AC and DC input. Good for up to 6S LiPo packs the device features a touch sensitive and white back-lit screen, temperature controlled fan, internal balancer, and a 5V/2.1A USB port. When it comes to software features the Hybrid Touch sports balance and storage charging modes, discharging as well as cycling functions. Included with the charger comes an AC input wire as well as two 100mm charging leads with Tamiya and T-type connectors.

View the specifications and more images here

June 1, 2016

Muchmore 1/8th scale lightweight Factory setup board

Muchmore have introduced their new lightweight Factory setup board for 1/8th scale vehicles. Measuring 400x500mm the board is only 12mm thick, making for a low weight of 177g. The board is made from hardwood and the hard plastic surface with Muchmore graphics allows for easy cleaning from dirt and other residue.

Source: Muchmore [muchmoreracing.net]

June 1, 2016

Muchmore Impact 7.4V flat & hump style RX LiPo packs

Muchmore have introduced two new 7.4V LiPo receiver battery packs. First up is the flat-type variant that measures 85x29x19mm. It weighs in at 90g and is made using high-capacity 2500mAh cells. It comes pre-wired with a 90mm 20AWG silicone wire with JR-style connector and XH balancer plug. Also new is the 2000mAh hump pack, measuring 54.5×31.5x32mm and weighing in at 91.5g. It comes with a 85mm receiver wire. Both packs are housed in shrink-wrapped soft cases for protection.

View the hump pack here

May 30, 2016

Muchmore Impact Linear FD2 6400mAh LCG LiPo battery

Muchmore Impact Linear FD2 6400mAh LCG LiPo battery pack

Muchmore have introduced their new Impact Linear FD2 series LCG LiPo battery pack. Made from high performance 110C cells the battery is only 22.3mm tall, meaning its use will lower the car’s centre of gravity compared to the class-standard 25.1mm packs. With a capacity of 6400mAh it is good for the use in modified and stock classes alike and the weight of only 271g also reduces the vehicle’s overall weight, allowing to put weight where it is needed.

Source: Muchmore [muchmoreracing.net]

May 24, 2016

Muchmore 40mm Turbo cooling fan

New from Muchmore comes the 40mm Turbo cooling fan. High-voltage compatible the unit is good the for the use with 6V to 8.4V input, allowing for a high airflow and effective cooling. Coming in an all-black design for a stealthy factory look the fan is ideal for motor cooling in hot ambient temperatures.

Source: Muchmore [muchmoreracing.net]