Red RC » Brand

November 22, 2007

DiMonaco DM Bullet Hard pipe

Italian company DiMonaco have released an updated version of their EFRA #2064 3-chamber exhaust pipe, called the DM Bullet Hard. This polished exhaust is designed for use with buggy motors and new revisions including a thicker stinger material, new mounting system, better back pressure nipple placement and the stinger now also sports a reinforcement rib to prevent damage in a collision. DiMonaco also have a number of different manifolds available for this pipe in different lengths and shapes.

Source: Modellismo RC [modellismorc.net]

November 21, 2007

Futaba 3GR-FS 2.4GHz with R603FF

Futaba have released this new stick transmitter that sports virtually every feature of the 3PM 2.4GHz system, but then in the stick layout preferred by many racers. Like the 3PM 2.4GHz, the 3GR-FS is dedicated to 2.4GHz so there’s no module to worry about. The antenna is shorter and lighter, folds down for easy storage, and pivots for optimum reception, plus, it’s compatible with the optional R603FS receiver to allow for Dual Antenna Diversity.

Click more to read the features… content

November 21, 2007

O’Donnell Super Sport .21 Engine

Designed in the USA by master engine tuner Steve O’Donnell, the Super Sport .21 is the pinnacle of 1/8 scale nitro racing. It’s a shining example of the “clean sheet” concept – a fresh look at engine construction and components, with nothing borrowed from existing technology. Only state-of-the-art machining and materials have gone into producing this engine with features including the original O’Donnell-designed “big head” machined aluminum heat sink head, dropped down low for a better CG. Available in February.

Click here for more details… content

November 21, 2007

Reckward Tuning Symbio for Losi 8ight

Following on from the release of the Symbio truggy body from Reckward Tuning, comes the latest Symbio shell, this time for the Losi 8ight buggy. The body has been made from 1mm thick, high quality, polycarbonate and comes pre cut with the base, tank cap, engine position and antenna all milled out. The front end sports a separate nose piece, while the rear of the shell has a double diffuser and the shell is supplied with Symbio decals and window masks.

Click here for more pics… content

November 21, 2007

Ryan Lee wins South Korean Nats

Xray have a report from the recent Korean 1/10th 200mm Nationals that saw the race win go to class débutante Ryan Lee. In qualifying it was Choi Nak Sung that took the pole position from Ahn Hyun Ho in 2nd, with Ryan Lee in 3rd and Goo Sung Mo 4th. Sunday’s racing saw the weather change for the worse with rain putting a damper on the event and giving the racers an extra challenge trying to protect their cars from the water. The main final saw Xray racer Ryan Lee dominate the entire race, taking the win from Jang Ji Hwan in 2nd and Kook Mu Sung in 3rd.

Source: Xray [teamxray.com]

November 21, 2007

STS 2008 Engine line-up

Taiwanese engine manufacturer STS have unveiled more additions to their already extensive range of engines. First up is the new S12XS, 2.1 cc touring car motor that has a 12mm crankshaft with turbo scoop, 5 port tear dropped ABC liner and is supplied with a turbo plug. The S12XS is also available as a 3 port IFMAR legal version. Also for on road is the new 3.5cc S21R motor that has a 14mm balanced crankshaft with turbo scoop, 5 port ABC liner, carburettor with interchangeable venturis and is also supplied with a turbo plug. Finally is the S21T buggy engine which is exactly the same as the on road motor but has a larger cooling head as is normal with off road motors.

Click here to see the other engines… content

November 20, 2007

Intellect 4600VR-1 cells

Intellect will soon release the follow up to the explosive power of their IB4200 cells with the introduction of the all new IB4600VR-1. These new batteries not only provide longer run time than their predecessor but they will have been tested to ensure that they are stable and safe, and upon passing, the VR-1 cells will go on sale. Expect to see them available from your favourite cell matching company in the near future.

Source: Seiki [e-seiki.co.jp]

November 20, 2007

Ultimate Racing wheel axle spacers

Ultimate Racing have released these new adjustment washers, which have been made from spring steel and designed for adjusting the gap between the axle bearing and the wheel hub. Measuring 8.1 x 10 x 0.1 mm, they are sold in packs of 10 and allow you to perfectly adjust the wheel hub tolerance without affecting the bearing function.

Source: Ultimate Racing [ultimateracing.es]