Red RC » Brand

July 26, 2023

Sunpadow launch new ERC battery range

Sunpadow has announced the launch of its new ERC range of entry level batteries. Best known for providing battery power to drivers like newly crowned European 4WD Buggy Champion Michal Orlowski and Touring Car World Champion Bruno Coelho, the ERC range is aimed more at the hobby end of the market. High performance, high quality and high cost performance at budget level pricing are the important characteristics of ERC brand series and the range of 2S, 3S & 4S will cover everything from 3800mah to up 9800mah capacity.

Source: Sunpadow [sunpadow.com]

July 26, 2023

Mugen Seiki MBX8 carbon fuel tank guard plate

Mugen Seiki has released an optional carbon fibre fuel tank guard plate for their MBX8 1:8 Nitro Buggy. The plate protects the tank from the heat of the exhaust as well as acting as a mounting point for fuel tubing with two sections milled out for the placement of tubing mounts. In addition to heat countermeasures, the plate helps avoid problems such as the muffler coming off and melting the fuel tank. The plate is designed specifically for use only on the buggy and not their truggy.

View mounted to tank here

July 25, 2023

MIBO International 2024 Announcement

Following the hugely successful inaugural running of the MIBO International Race in the Czech Republic in March, former international touring car racer Michal Bok has confirmed the race is back for 2024 on the slightly earlier date of February 16-18. A long time dream of Bok to host his own major international event in Hrotovice, the indoor event finally came to fruition in 2023 bringing together both electric onroad and offroad racing on two tracks build side by side by the team from Mibosport. The first edition of MIBO International saw Mugen’s Ronald Volker crowned the inaugural Touring Car Champion and Xray’s Bruno Coelho take double buggy honours at the Sport V Hotel venue. With everything from the track, restaurant, bowling alley and hotel rooms all under one roof, the venue was a hit with racers who travelled from 13 different countries. With a capped entry limit the relaxed schedule also meant plenty of time in the evening to wind down and socialise over dinner after each day’s racing. On the onroad track, the racing action will again cater for Modified, Stock & FWD Touring cars plus Formula. The Offroad track will cater for 2WD and 4WD Buggy as well an open class of ‘Offroad Kids’ that will give the future stars of racing an opportunity to be a part of this international event.

Source: MIBO [mibosport.com]

July 24, 2023

HB Racing E8 World Spec 1:8 eBuggy

In a natural follow on from the announcement of their D8 World Spec 1:8 Nitro Buggy last month, HB Racing has released CAD images of the electric variant – the E8 World Spec. Updated to the eBuggy include the same suspension redesign found on the nitro D8 WS buggy. New front and rear suspension helps the E8 WS excel on high speed and high grip race tracks. The key parts are new symmetrical suspension arms, adjustable pills on all 4 of the inner suspension mounts, new caster blocks, steering hubs, and rear hubs. Many of the parts are compatible with the latest HB Truggies and nitro buggy, so racers need fewer spare parts at the track.

View more CAD images here

July 24, 2023

Surpass Hobby GECKO Mini 18 brushless power system

Surpass Hobby has released the GECKO Mini 18 brushless power system which it has developed specially for the TRX-4M 1:18 rock crawler from Traxxas. Equipped with intelligent closed-loop control, it is especially suitable for low-speed climbing. Performance inertia brush and sensory force give better linearity and easy control and maintain a fixed motor signal under different loads and give excellent start-up, acceleration and linear output. The built-in sensor brushless motor of GECKO Mini 18 has strong current resistance and excellent CNC enclosure. The compatible ESC has a variety of protection functions, including: LIPO or NIMH battery power-off protection/ESC overheat protection/motor overheat protection/throttle signal loss protection/motor stall protection, built-in switch mode BEC 5V/500mA, compatible with high wiring and high voltage relays. All these and can be programmed using the Surpass Program card .

View spec & more images here

July 22, 2023

Volker heads Mugen 1-2 in ETS Austria qualifying

Mugen Seiki enjoyed a one-two in qualifying for ETS Austria with Ronald Volker the Top Qualifier in Aigen ahead of team-mate Eric Dankel. Volker would secure the TQ after topping the opening two of the four rounds of qualifying. Round 1 podium finisher Dankel would also top the times, doing so in Q4 to make it a Mugen lock out at the front of the grid at the second round of the championship. The only other driver to post a TQ run, Marc Rheinard took his Awesomatix to the fastest time in Q3 ahead of Dankel as Volker had a bad run. Overall Jan Ratheisky’s Xray will start fourth ahead of the Yokomo of Christopher Krapp with Oliver Havranek completing the Top 6 on the grid. In Pro Stock, Adam Izay is the Top Qualifier from Louis Kretschmer having posted 3 TQ runs with his Xray.

Image: Mugen Seiki Europe [Facebook]

July 21, 2023

Fenix Racing G56.2 Pro10 chassis

Italy’s Fenix Racing has released its latest Pro10 chassis, the G56.2. With the original G56 born in 2018 and still going strong in the Pro10 arena, drivers were asking for a new chassis to drive so taking on all the suggestions and driver feedback it lead to the evolution of the G56.2. Overall lighter, the latest kit get a new wheelbase, SWB and SSWB (compared with G56), a lower centre of gravity thanks new V-link suspension, a new redesigned front end, and a new chassis stiffening system. Three battery positions are possible for shorty lipo with it still possible to use touring style lipo in the SWB version. There are also 2 position options for the cooling fan in the motor pod. Also at the rear of the car is a new sphere differential. Up front the car gets a new body support.

View more images here

July 20, 2023

Arena RC Racing Carbon Front Body Enforcer Series

Arena RC Racing has released their Carbon Front Body Enforcer Series intended for 1:10 Electric Touring Car use. The carbon bumper upper plate features a post support front bonnet to maintain body aerodynamics thereby reducing downforce loss. The set includes 2 different angle post for supporting different bodies and adjustability. The Carbon Front Body Enforcer is available for the Xray X4’23/22 and T4, Mugen’s MTC2R and MTC2, Yokomo’s BD12 & BD11 and the Awesomatix A800R.

View more images here