Red RC » Brand

March 6, 2008

Hot Bodies Factory Tools

A few days ago we wrote about some new releases from Hot Bodies, which included a new range of tools. Hot Bodies have now released more information about that range and besides the standard hex wrenches and screw drivers, there are also some set-up tools and turn-buckle wrenches. For helping with set-up, HB have released this black anodised droop gauge and matching pair of 20mm tall droop blocks, with the gauge able to measure from 0mm to 10mm in 0.5mm steps. For adjusting 3.7mm turn buckles HB have released a 80mm long wrench, which like the other tools is black and sports a HB logo on the side.

Click here to see the other products… content

March 6, 2008

Sven Zünd takes LRP Islikon Masters Rd4

Robitronic have a report on their website from the 4th round of the LRP Islikon Masters in Switzerland. The race was run on controlled tires and the softer, better performing 27-compound was very hard to get on this weekend, therefore some clever tactics were needed and Sven Zünd with his Robitronic Avid made the most of the difficult situation, saving his tyres for the final round of qualifying and the finals. Starting from the pole position, he was able to take the win ahead of the Xray driving Lnenicka brothers Ronny and Sacha who finished in 2nd and 3rd respectively.

Source: Robitronic [robitronic.eu]

March 5, 2008

Jaad Racing Tuned shock towers

Jaad Racing have released some new additions to their Tuned Shock Towers range with new shock towers for the Tamiya TRF416 and the Serpent S400. Made from carbon fibre, there are new pieces for both the front and rear of both cars, with all providing more tuning possibilities with regards the shock absorber angle.

Click more to see the Serpent shock towers… content

March 5, 2008

Kyosho dNaNo FX-101 1/43rd scale

Seen here first at the start of February, Kyosho have released full details of their new dNaNo concept on its dedicated, Japanese only, website. These 1/43rd scale cars make the company’s Mini-Z line look big, yet they are extremely detailed and are true radio controlled race cars. Available in 3 different chassis versions, with varying wheelbases and motor positions, the cars are controlled by Kyosho’s KT-18 2.4GHz radio system and are kept stable on the track, we are told, through the use of a mini built in gyro. Powered by a tiny 3.7V 130MAh LiPo cell, the car sports a rear differential and power is supplied through a micro coreless motor, originally found in mobile phones to produce the vibration, but then optimised. To enable the racer to easily compete on different tracks, each car is supplied with its own IC Tag (transponder), which you can see as in blue on the bottom of the car in the picture above. If you want one you will have to wait, but that will give you time to choose between the Ferrari Enzo, Ferrari 360 Modena, Murcielago LP640, Nissan Skyline GT-R, Porsche 962C LH and finally the Mazda 787B.

UPDATE: Click more to view some pictures from today’s product launch… content

March 5, 2008

Ryan Maker joins Team Xray

Team Xray Australia have announced that young Australian racer Ryan Maker has signed to race the Xray range of touring cars for 2008. Commenting on his deal to race the T2’008 & NT1, Ryan had the following to say:

Privileged to be racing for Team Xray. I really enjoy being able to race for Xray as their car’s quality and performance is outstanding! I would like to thank Custom Model Cars and Team Xray and Hudy for all their support.

Source: Xray [teamxray.com]

March 5, 2008

HB Cyclone Hub Carriers & Spur gears

Hot Bodies have released 2 new items, for both their Cyclone D4 4wd electric buggy and for general touring car use. Beef up your D4 with these tough purple anodised aluminium front hub carriers, included with the Worlds Edition they are now available for the standard D4. Sold in a pair of 2 and supplied with purple anodised roll centre adjustment washers, they are available in both 0 and 13 degree versions. Also new from HB is a range of 64 pitch spur gears, available in one-tooth steps from 88 to 94 teeth and 101 to 110 teeth, so now you can select the ultimate gear ratio for your touring car, pan car or other racing vehicle.

Click more to see the spur gear… content

March 5, 2008

Xceed Power tool tip set

More new products from Xceed this week with the release of this handy power tool tip set. Made using the same high quality hardened steel as on the standard tools, these versions can be used with your favourite electric screw driver. Making the assembly and disassembly of your car super easy, the set includes 2 hex head tips, in 2.0mm and 2.5mm, as well as 2 Philips head screw driver tips, in 4.0mm and 5.8mm. Each tip is 100mm long and available to buy separately.

Source: Xceed [xceedrc.com]

March 4, 2008

Atomic RC Kyosho Spada options

Hong Kong based Atomic RC, makers of aftermarket parts for many current cars, have put their hand to making some parts for the Kyosho Spada gas car. The new parts include some new front CVD’s as well as some lightweight aluminium parts, which include the rear axle blocks shown above. Other alu. parts are available in the form of front bulkheads, middle main shaft mounts and finally they have also released a new lightweight central main shaft to complete your lightweight, high performance conversion.

Click here to see the other new products… content