Red RC » Brand

December 20, 2007

Mike Swauger joins JP Racing

Top US Mugen racer, and multiple Winternats winner, Mike Swauger has been in touch to let us know that he has signed to JP Racing for the 2008 season. Previously running with the Ninja engine, Mike failed to shine at this years World Championships and his results there may have had a big influence on his choice of power plant for next year. On leaving the GRP made motor, Mike has also left behind GRP tyres and so negotiations are still ongoing to secure a tire sponsor for the new year. Since signing to the French manufacturer at the beginning of December Swauger has gone on to win the recently held Toys for Tots race at Crystal Park, an event which he also TQ’d and set a new track record.

December 19, 2007

Barry Baker joins Team Trinity

Barry Baker joins Mugen Racing

Barry Baker (old photo) has been confirmed as joining Trinity/Intellect as a driver, research and development specialist and sales rep. The 3 time National winner, in 2007 alone, joins recent signings Ralph Burch, Paul LeMieux, Jim Dieter and Brian Kinwald and had the following to say:

First of all I would like to say thank you to Jim for the post and also the whole Trinity family for the welcome to the team. I have worked with Jim before and we have a great respect for each other. I would also like to thank Checkpoint Motors and SMC batteries along with Odonnell for all their support these past 15 months…3 National Titles for the year!…Thanks again! I look forward to represent Trinity and Intellect at this years races along with the World Championships and many years to come.I feel with the knowledge and committment of the racers and employees of Trinity,hopefully we can get this hobby back to where it was years ago.

Source: RC Tech [rctech.net]

December 19, 2007

SIIM PGR S21B Buggy motor

Following on fom the release of their first engine, the PGR S12T, Siim have now released the first information about their Star Motor made PGR S21B. Born to satisfy the most demanding drivers, it is a highly stable, potent and easy to tune buggy engine. Having been tested for a long period of time to ensure its performance and quality, the new motor will finally be available worldwide this Christmas.

Click here for another picture… content

December 19, 2007

Venom X Pak Lipo 7.4v 5000mah

Venom Racing have raised the bar with their new custom built r/c car LiPo race packs. Enclosed in a specially designed moulded case for protection of the cells, they feature heavy duty 12awg wire as well as balance and deans style connector. This particular pack is a 7.4V 20C 5000mAh version that has a charge rate of 5 amps (1C) and a discharge rate of 100amps while the maximum pack voltage is 8.4V.

Source: CML [cmldistribution.co.uk]

December 18, 2007

Exotek R3 M18 Pro Conversion

Exotek Racing have released an all new design concept for the R3 this time around with the goal to use Lipo batteries in the M18. The chassis plate has been machined to make a pocket in the 2mm thick chassis to protect LiPos from being damaged from the track surface, yet still maintaining the low profile and super narrow features of their R3 chassis. For the die hard NiMh racers, the chassis still accepts 6 cells side by side and with the addition of multiple tape slots in the battery compartment you are able to position your battery exactly where you want it to adjust the cars balance. The R3 now also accepts micro servos such as the Hitec 85MG and for improved car control, the R3 continues to use its unique mono crank steering system.

Source: Exotek [exotekracing.com]

December 18, 2007

Xray NT1 Receiver Switch set

Xray have announced the release of this complete receiver switch set for the NT1 that fits directly into the car’s composite receiver case. This pre wired mechanical on/off switch, for quick & easy powering/shut down of on board electronics, comes supplied with a moulded rubber cover that protects the switch from contamination by fuel and dirt. Comes fitted with Futaba J connectors.

Source: Xray [teamxray.com]

December 18, 2007

RT Symbio Truggy body T2

Reckward Tuning have released the second version of their unique looking Symbio truggy body shell, suitable for the Mugen MBX-5T or Jammin X1-CRT. Made from 1mm thick high quality polycarbonate, the outer contour comes pre cut, while the rear of the shell has a R-Line diffuser for that aggressive look. Supplied with Symbio decals and window masks, refueling is possible with all fuel guns on the market through the front window.

Click here for more pictures… content

December 18, 2007

JConcepts Rulux racing wheels

Off-road racing wheels are subjected to the most severe abuse and JConcepts Rulux wheels are designed with racing and bashing in mind, while allowing your vehicle to look its best while doing it. The Rulux wheels spoke design combined with the inner rib detail is the result of rigorous testing by qualified drivers in a variety of conditions. Incorporating an outer glue catch that resists excess glue from running down the wheel face during the gluing process, all wheels are branded with the small JC logo for brand identification and authenticity. The JConcepts Rulux wheels are available in the 2 most popular color combinations, bright white and fluorescent yellow.

Click here for more information… content