Red RC » Brand

July 13, 2022

Infinity IF15 rear tower & camber plates

New for the Infinity IF15 and IF15W, Creation Model have produced some new options beginning with this new rear shock tower that features a body mounting position 3.5mm lower than std, contributing to a lower centre of gravity. By using the T266 Alu HBP mount it is also possible to utilise a horizontal style body mounting style. The shock mounting positions have also been reduced to 3, offering increased strength and crash resistance. There is also a new carbon camber plate that can be adjusted in fine steps. The diagonal direction of the holes incorporates the latest setups for the IF15. The bottom hole is the same original hole 2 (lower), the more you raise it, the more calm the rear will be. Finally, the carbon camber plate that can be adjusted in a diagonal direction that incorporates the latest setups for the IF15. In addition, the A-arm type camber link enhances rigidity and is a set of parts that greatly support rear grip. The bottom hole is the same as original hole 2 (lower), the more you raise it, the more calm the rear will be.

View the camber plates here

July 13, 2022

JConcepts Landmines pre-mounted for Arrma Mojave

JConcepts designers have opened the imagination to create an all-new performance scale tire for the Arrma Mojave. The Landmines, available pre-mounted, developed after tuning and analysis have reached the summit and now available to the Mojave enthusiast. The design starts with a robust carcass carefully shaped and sized for a multitude of conditions and capable of bashing those difficult courses while being down-to-earth enough to carry a scale appearance. The team spent considerable time with the split-block centre design which has been sliced, stepped, and recessed for flexibility and contortion over sharp, loose, and polished surfaces. The Landmines have alternating solid and cavity pads which is ideal for transitioning from smooth dirt or pavement into dirt, mud, and rocky terrain. Moving toward the edges of the carcass, the tire has horizontal grippy pads with edge and channels to provide additional forward bite.

View the set of premounted Landmines here

July 13, 2022

Yokomo YD-2 aluminium 3-piece rear hub carrier

Yokomo is pleased to announce the release of their new team aluminium 3-piece rear hub carrier for the YD-2. The universal shaft features a short axle shaft for narrow scrubs and the universal joint pin is positioned as far outward as possible to activate the suspension movement and enable more direct movement. Conventional universal shafts can also be used by adding spacers so you can feel the difference in movement by combining them. This rear hub carrier set also features selectable upper and lower arm mounting positions, and by making the upper side a separate part the length of the upper arm can be changed variably making it easier to control the change in ground contact surface when rolling. The lower arm can also be installed at 4 different heights, allowing for a wider range of roll centre settings and is an excellent match with the rear weight adjustment.

View more images of the rear hub carriers

July 13, 2022

Xray X4 PSS 2-hole 0.8mm pistons

New for the X4, Xray have introduced these new composite PSS 2-hole 0.8mm pistons. The configuration allows for a heavier shock oil that gives the car a more consistent handling. Sold in a set of 4, they also work with the T4 touring car.

Source: Xray [teamxray.com]

July 11, 2022

Xray XB2 alu steering arm for double sided plate

For the XB2, Xray have introduced this new alu steering arm for double sided plate. The new part allows for an adjustment range of 0~7mm in the frontward linkage position. The part is made from black coated Swiss 7075 T6 aluminium which offers your XB2, SCX and XT2 more precise steering.

Source: Xray [teamxray.com]

July 11, 2022

Factory Pro RC X4 MR conversion kit

New from Factory Pro RC, is their MR conversion kit for the Xray X4’22. The main aim of the conversion is to change the position of the motor, moving it 26mm to the rear. They claim that this helps give the car better traction and improved acceleration. The set includes the new 2.25mm thick carbon main chassis, 2mm carbon top deck, the new front and rear belts and the new rear inside battery guard plate also made from carbon.

Source: Factory Pro RC [facebook.com]

July 11, 2022

Sagami RC Fab AK12 battery stopper & rear brace

Sagami RC Fab has released two new hop-up parts for Team Bomber AK12. The first is a new battery stopper, the successor of BO-002 with enhanced functionality. It consists of an aluminium front stopper and a carbon rear stopper and gives the battery the option of 3 different positions. It can be used with both battery brace in the AK12 kit and the carbon battery brace made by SRF. The other new items is an aluminium rear brace. Machined from 7075-T6 and matte black anodised, compared to the carbon rear brace included in the kit the assembly accuracy and the rigidity of the entire motor pod are improved.

View the other options here

July 8, 2022

Hobbywing EZRun Mini28 speed controller

Hobbywing introduce their new EZRun Mini28 speed controller built specifically for 1/28 scale racing. The ESC is extremely small (22mm by 14mm) and lightweight at only 5 grams and the shape is designed for ease of soldering and reducing unnecessary tweak, an important factor for a 1/28th scale racing car. The fully-alloy heat sink ensures that the ESC can dissipate heat and operates at a healthy temperature range while the maximum output current can be up to 30A. The ESC has many adjustable parameters, including PWM frequency, brake frequency, softening, Boost, Turbo and much more. It is equipped with two usage modes, the Zero-Timing which is more commonly known as ‘blinky’ and the ‘modified’ mode which allows power-hungry users to increase additional turbo timing in the software. The ESC also has a built-in BEC which can support a maximum output current of up to 3.5A and the output voltage at either 6V or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market. Simple and convenient, parameter settings, firmware upgrading and other operations can be established using Hobbywing’s OTA Bluetooth module and your mobile phone via the Hobbywing app.

View the underside of the Mini28 here