Red RC » Products

April 7, 2016

Exotek 22 3.0 laydown gearbox conversion

Available for pre-order now is Exotek’s laydown gearbox conversion for the TLR 22 3.0 buggy. The machined alloy 3 gear box makes for precise running gears, it is light of weight yet strong enough to stiffen up the chassis and rear tower for improved consistency on high-grip tracks. The low centre of gravity arrangement also makes all gears running in a straight line for a smoother running idler gear while the alloy material reduces motor temperatures as it acts as a heatsink. Also incorporated into the design is a slightly raised gear diff position which helps when running lower ride heights. The set will include a black anodised aluminium gearbox, an alloy lightweight motor plate, delrin gear cover, a hinged, lightweight carbon fibre battery mount as well as alloy waterfall spacers, a chassis drill template, hardware and full instructions. Targeting experienced modellers the set will become available around mid-April.

Source: Exotek [exotekracing.com]

April 7, 2016

Losi 1/5 Monster Truck XL 4WD RTR

Horizon Hobby have introduced the Losi 1/5 Monster Truck XL 4WD RTR large scale truck. A massive 90cm long and 60cm wide, the truck is powered by a 29cc gasoline engine that is capable of propelling the vehicle to a speed of up to 45km/h. To help manage its insane power, the Monster Truck XL comes equipped with AVC vehicle control technology and two authoritative large-scale steering servos. Other features include aluminium front spindles, heavy-duty monster truck tyres, and viscous torque differentials that consistently deliver maximum power. Also included in the set is a genuine Spektrum DX2E transmitter and the truck is available in two bodyshell colours.

Continue reading here

April 6, 2016

JConcepts Aero car-stand

JConcepts begins 2016 with fresh pit-ware for the 1/10th and 1/8th racing scene. Given to competitors at the Reedy Offroad Race of Champions earlier this year, the Aero car-stand in matte black material stands out in any pit area and supports the vehicle with its unique footing and highly chiseled shape. A rail-like border contains the shape while a deep draw along the sides creates a bold surface for included decal or custom wrap. A “V” step-down feature was added to the ends which brings the styling back down to earth while the void creates added space below the vehicle. A lower stance was built into the design and the smaller foot-print occupies minimal space in the pits. Top load pockets were incorporated as catch-all compartments for body clips, wheel nuts or any small items that are routinely changed during a race event. Triangle cushion pads are positioned on the top to provide support all the way to the edges on any platform vehicle to prevent slippage. JConcepts has included a decal wrap for maximum exposure and presence that resembles the popular chassis tape “Striker” theme.

View another image of the stand here

April 5, 2016

Xray XB2 rear roll centre holders

Xray continue to release multiple material option parts for the XB2 Dirt Edition with the introduction of these composite rear roll-centre holders. The medium hardness versions are suitable for very-low to low-medium traction tracks while the hard versions suit low-medium to medium-high traction tracks.

Source: Xray [teamxray.com]

April 5, 2016

Vigor RC BD7 & T4 tweak plates

Vigor RC have released these two tweak plates for the Yokomo BD7 and Xray T4 touring cars. Made from 5mm thick high quality acrylic, they have been designed to have the same chassis plate outline as the car its for. Works as any normal tweak plate does, it comes with a carry case to protect it while being transported or stored.

View the T4 tweak plate here

April 4, 2016

Bezerk RC XB2 carbon towers

Bezerk RC introduce these carbon towers for the Xray XB2 Dirt Edition. The front tower features standard geometry, but has increased material for crash protection and is made from 4.0mm glossy carbon fibre for added strength. The rear tower also features standard geometry and aims to be stronger thanks to the 4.0mm carbon fibre.

View the front tower here

April 4, 2016

Montech IS-200 190mm touring car body

Montech have introduced their new 190mm touring car body, the IS-200. Positioned in their line-up between the Evo and the Silvy, the new body works great on asphalt giving excellent turn-in while being very stable and carrying lots of speed through the corners. Made from 0.7mm thick high quality polycarbonate it comes supplied with wing & mounting bolts as well as window masks and decals.

View more images of the IS-200 here

April 4, 2016

Making the Xray RX8’16 – Part 2

01_D80_8920

After making the decision to incorporate the changes, I was almost a permanent fixture behind the computer… trying to put all the changes from the 3 different concepts into one car. This was very tricky & demanding, as I had to throw away a significant amount of the work done beforehand, and even still I was constantly running into conflicts and problems. After a huge amount of time & effort spent on this, I finally finished and was very pleased with the outcome. I uploaded all the manufacturing programs to the production server, and Production started to work on the 20 pieces of the cars for the team. While working on the team cars, we sadly informed distributors that the RX8 would be delayed for the 2015 season. This was not very welcome news.

Continue reading here