Red RC » Products

March 21, 2018

VRP MBX8 torsional carbon fibre arm inserts

VRP have just released torsional carbon fibre arm inserts for the Mugen MBX8 buggy. These are much different than typical carbon arm inserts as rather than flexing torsionally, they flex length wise, from hinge pin to hinge pin. This will help the suspension arm flex correctly, keep them from twisting under load when accelerating/decelerating, yet allow them to flex with the squat of the chassis. Overall, they will give more traction and a consistent feel compared to regular carbon or plastic inserts, thanks to using directionally laid carbon fibre plates. The parts are machined in house at VRP in Houston, Texas and are available in 0.8mm, 1.0mm, and 1.2mm thicknesses.

View another image here

March 21, 2018

Zen Racing front end suspension balls w/O-ring

Designed to improve the front end damping on LMP or RXGT12 kits are 6mm front suspension balls from Zen Racing. The O-rings inside, held by a slot, increase 1/8th king pin dampening and they hold the chosen dampening fluid against the king pin for a more consistent feel.

Source: Zen Racing [zen-racing.co.uk]

March 21, 2018

Schumacher CAT L1 1/10th 4WD buggy kit

Schumacher have introduced their latest contender for the competitive 1/10th 4WD buggy class in the form of the CAT L1. Developed in cooperation with Schumacher’s World Class drivers Michal Orlowski and Jörn Neumann, the L1 features a 3-gear centre transmission for opposite motor rotation, improving agility and steering on high traction surfaces as a lightweight layshaft and side gears make for reduced rotational masses. In addition, small, low rotating mass gear differentials with 3-position height adjustment allow to fine-tune driveshaft plunge for mixed track conditions. Another drivetrain gizmo is the FAB Front Adjustable Brake System with larger 22 tooth pulleys as a pinned and centre-mounted motor mount makes for a low overall centre of gravity. The buggy builds on a new 7075 aluminium chassis – with vertical top decks – to which the updated suspension is attached. New to the L1 are updated geometry wishbones, new rear hub carriers featuring new vari-length wishbone and hub geometry as well as revised front pivot strap inserts for front track width adjustment and nd new 8°, 10°, or 12° front rake adjustment. New big bore shock absorbers and an AEROX body and wing round out the all-new package. The car, that was used in prototype stages by Michal Orlowski to sweep the EOS rounds in Germany and Slovakia, is set for a release in April.

View a list of all new features and more images here

March 21, 2018

Hudy clamping aluminium servo horns

Hudy have introduced their new clamping aluminium servo horns. Machined from high-quality 7075-T6 aluminium and coming black anodised the heavy duty servo horns are available in offset 1-hole as well as standard 2 or 3-hole specification and for 23T, 24T or 25T spline servos. The special design allows to access the clamping screw from above, making installation in tight surroundings easy. In addition to looking the part the servo arms will also improve steering response compared to standard composite servo horns.

View more images here

March 21, 2018

Xray XT8 aluminium front suspension conversion

Coming from Xray and made for the XT8 1/8th truck is an aluminium front suspension conversion kit. The complete upgrade set includes items such as aluminium steering blocks, 16 degreed caster C-hubs, steel steering block pivot pins, composite C-hub bushings, alloy steering knuckle plates as well as ball cups, pivot balls and miscellaneous small parts. Using the parts will increase overall steering reaction, bump track handling, and durability all while making the truck easier to drive. The kit was used by Xray’s Ty Tessmann to win the ROAR Nats and it is available now.

Source: Xray [teamxray.com]

March 21, 2018

Pro-Line tease Slidejob 2.2” dirt oval tyre

Pro-Line Racing have released a first image of their forthcoming Slidejob 2.2” dirt oval tyre. It was specially developed for demanding dirt oval racing, comes as narrow front and wide her variant and will fit most 2.2” buggy wheels. More information will become available in time for the release.

Source: Pro-Line [prolineracing.com]

March 21, 2018

Merlin McFly personalised CF sandwich setup board

Germany’s Merlin Depta has released a carbon fibre sandwich setup board that can be personalised with a custom engraving. The board is made from highest grade U.S. sandwich carbon material, it measures 430x350x10mm and the total weight is only 380g which is perfect to take this one on the plane to go racing around the globe. The writing on the board is personalised with a premium engraving in German quality handcraftsmanship. For further information on the product, check Merlin’s “Merlin McFly” social media page here.

March 21, 2018

T-Works MBX8 titanium lower shock mount pins

T-Works have introduced a set of lower titanium shock mount pins for the Mugen MBX8 buggy. The parts are machined from high-quality 64 Grade titanium and will replace the standard steel parts for items of lower weight and greater corrosion resistance. A machined groove helps with precise droop adjustment. The pins come in sets of four and are direct replacements.

Source: T-Works [rc-tworks.com]