June 29, 2018

Radtec 1/10th on-road droop gauge

Coming from Radtec is their new suspension droop gauge for 1/10th scale on-road vehicles. The gauge is of a unique “pyramid” design with 0.4mm increment steps per side, however by flipping the gauge 0.2mm increments are accessible with the overall design minimising chances of the tool interfering with the suspension arm. The gauge is made of quality aluminium material, it comes black anodised, with machined silver edge details and white markings for easy reading of the settings.

View another image here


March 26, 2018

Radtec X1 aluminium front body post mount

Coming from Radtec and made for the Xray X1 formula car is an aluminium front body post mount in a two-tone finish. The aluminium plate is machined from high-quality material and features a black and orange finish and allows to swap between different front wing brands without having to change the front body mount position as the post is being attached to the mount and not to the front wing. Included comes suitable mounting hardware.

Source: Radtec [radtec-rc.com]


February 2, 2018

Radtec BD8 RTC +1mm rear C-hubs

Radtec have introduced a set of 0 degree RTC C-hubs in +1mm specification for RTC-equipped Yokomo BD8 cars. The hubs are machined from high-quality aluminium and come black anodised and with machined silver edge details. The +1mm configuration makes for an increased track width that will improve corner speed and rear traction.

Source: Radtec [radtec-rc.com]


January 15, 2018

Radtec T4 51mm double joint driveshaft set

Coming from Radtec and made for the Xray T4 series of touring cars is a 51mm premium steel double joint driveshaft set. The shafts are made from ultra-hard spring steel for improved wear characteristics with the machined wheelshafts further improving precision. Included in the set, that adds to the already existing 50mm and 52mm shafts, are two 5x10x3mm high-grade ball bearings.

Source: Radtec [radtec-rc.com]


October 30, 2017

Radtec aluminium motor cooling fan mount V2

Radtec have introduced their new aluminium motor cooling fan mount V2 for 30mm and 40mm fan units. The 2-piece mount is machined from aluminium and it comes black anodised and with machined silver edge details to set it apart from the V1 mount. The mounting pattern allows to attach all standard 30mm and 40mm fans and a machined channel conveniently takes the fan’s connecting lead to ensure tidy wiring jobs.

View another image here


October 13, 2017

Radtec aluminium Xray side spring retainers

Coming from Radtec are new aluminium pan car side spring retainers for Xray springs. The parts are machined from aluminium, they come black anodised and with engraved markings to allow for a more precise setup. The retainers are designed to take Xray side springs and they are usable with a wide range of 1/10th and 1/12th pan car chassis.

Source: Radtec [radtec-rc.com]


September 18, 2017

Radtec white low-friction touring car belts

Coming from Radtec is a range of white S3M low-friction belts for many of today’s 1/10th electric touring cars. Available are 507/169T, 510/170T, 513/171T and 516/172T front as well as 180/60T, 186/62T and 189/63T rear belt that fit cars such as the Yokomo BD8, BD8SV, Serpent 4X/S411, Xray T4, Awesomatix A800, Destiny RX-10S and Infinity IF14. The Japanese-made and Radtec-branded belts will greatly improve the overall drivetrain efficiency due to offering as softer feel and lower friction than most standard black belts.

View a rear belt here


July 27, 2017

Radtec BD8 0 degree RTC aluminium C-hub

Available from Radtec are 0 degree aluminium C-hubs for RTC-equipped Yokomo BD8 touring cars. Machined from high-quality aluminium and coming black anodised and with silver edge details the parts replace the standard composite hubs with stronger and stiffer items in order to increase traction and improve drivability on high-traction surfaces.

View another image here