Red RC » RDRP

April 13, 2017

RDRP XB2 brass & aluminium 26 degree front bulkheads

Coming from Revolution Design Racing Products are new 26 degree front bulkheads for the Xray XB2 and XT2 kits. The overall design and material used greatly improves durability while also giving a more solid base for the inner hinge pins and additional weight, resulting in improved lower A-arm support on high-bite to very high-bite tracks. The bulkheads sport laser-etched markings for easy identification with the brass item weighing in at 45g while the alloy item only is a fraction heavier than the standard composite part. As with all of RDRP’s Xray-specific alloy parts the bulkheads are available in either orange or black anodising.

View more images here

April 12, 2017

RDRP XB2 brass servo & chassis weights

Available now from Revolution Design Racing Products are the XB2 brass servo and chassis weights. Starting with the chassis weight, it is purpose-designed for Xray’s XB2 and XT2 series of off-road vehicles, made from high-quality brass material and is a direct fit in the vehicle’s electronics compartment. The plate is held in place using the kit’s standard battery mount posts and it slightly raises the electronics but at the benefit of additional 36g of weight that keep the vehicle more planted in high bite or bumpy track conditions. Fixed by only two screws it also allows to easily remove the electronics, such as the receiver and speed controller, for cleaning and maintenance.

Continue reading here

April 11, 2017

RDRP XB2 aluminium battery thumb nuts

Revolution Design Racing Products have introduced aluminium battery thumb nuts for Xray’s XB2 series of cars. The parts offer a larger outer diameter and deep grooves compared to the standard parts, making for exceptional grip and easier battery swaps. Machined from aircraft-grade 7075-T6 aluminium and coming orange or black anodised the nuts sport machined silver edge details and laser-etched RDRP logos for cool looks. The nuts are available in sets of two from now on and they also fit the 4WD line of Xray 1/10th off-road vehicles.

View more images here

April 10, 2017

RDRP XB2 brass rear weight

Revolution Design Racing Products have introduced the XB2 brass rear weight for all Xray XB2 with laydown gearboxes. The weight is made from high-quality brass material and is a direct fit to the vehicle’s gearbox. The weight adds 34g to the rearmost part of the chassis for increased traction in lower grip conditions. The weight comes coated in black and with machined gold-colour edge details to match the remainder of RDRP’s brass option parts.

View another image here

April 7, 2017

RDRP XB2 aluminium battery post set

Revolution Design Racing Products have introduced an aluminium battery post set for Xray’s XB2 platform buggies and trucks. The parts are machined from high-quality 7075-T6 aluminium and they sport a finned design for cool looks and a low weight. Thanks to their design and the high-quality material used, the posts allow for a more secure battery mounting. The parts come black or orange anodised, with machined silver edge details and their visual appearance matches perfectly with RDRP’s forthcoming XB2 Ultra servo mount. With the M3 thread the XB2 aluminium battery posts are usable with standard or aftermarket battery thumb nuts.

View more images here

April 5, 2017

RDRP XB4 brass rear motor weight

Revolution Design Racing Products have introduced their new brass rear motor weight for the Xray XB4 1/10th 4WD buggy. Considered an essential option part the item weighs in at 26g and it sits just behind the motor and acts as a counter weight for the heavy LiPo battery that is located on the right hand side of the buggy. With the lighter motor the additional weight is needed to achieve a proper weight balance and thanks to its clever design it directly attaches to the chassis side guards using a single screw, meaning the weight is both easy to remove when needed while also securely fastened so it will not get thrown out of the chassis during severe track action. The weight is machined from high-quality brass, it comes with RDRP’s signature black and gold finish and it is a direct fit.

View more images here

March 29, 2017

RDRP B6 Titanium Lower Shock Screw Set

Revolution Design Racing Products have introduced a Titanium lower shock screw set for the Team Associated B6 and B6D buggies. It includes four lower shock mount screws made from high-quality titanium. The fasteners do away with the standard steel screws and they are of a unique design that only sports threaded sections where they are needed, while areas to which the lower shock eyelet bushings attach are of a plain design for improved durability and precision. The screw heads are also unique in the way that they feature dual 2mm and 5.5mm hex sections that allow to use 2mm hex or 5.5mm nut drivers to fasten or loosen the screws. Included in the set are two front and two rear shock mounting screws.

View more images here

February 14, 2017

RDRP RC8B3 machined Delrin shock parts

Coming from Revolution Design Racing Products are the RC8B3 machined shock parts, a direct replacement for the kit’s rod guides and lower O-ring bushings. Precisely machined from high-quality Delrin the parts improve the O-ring seal fit for optimised sealing, better shock rod guidance and a more efficient shock performance. The set includes four shock rod guides and four lower bushings, enough to equip all four shock absorbers of a car. The set is compatible to all 3rd generation RC8 kits including the RC8B3, RC8B3e, RC8T3 and RC8T3e.

View another image here