Red RC » Reflex Racing

October 20, 2014

Reflex Racing RSD TC6.2 carbon fibre bulkhead braces

Reflex Racing’s RSD bulkhead braces for the Team Associated TC6.2 were developed in order to change the flex characteristics of the car. By bracing the bulkheads at the top deck screws, the flex points of the chassis are moved closer to the centre line, which increases high speed stability and control. Additionally the braces provide more on power traction at whichever end they are being used. When using both stiffeners, the car will stay a little bit flatter at high speed, will be easier on tires, the response will increase in tight corners and the car will be easier to drive in sweeping corners. Machined from high-quality carbon fibre the braces are a direct fit and they come as a set of two.

Click here to view more photos

September 17, 2014

Reflex Racing RSD7 2015 touring car kit

Reflex Racing introduce the RSD7 2015 electric touring car kit based on the Team Associated TC6.2. After close to a year of development on the TC6.2 platform, Reflex Racing have decided to package together their essential upgrades to release the RSD7 2015. The kit includes all the parts needed to build a rolling chassis kit and as it is based off of the TC6.2, the box includes the original TC6.2 chassis plus the RSD7 aluminium chassis, providing you with two different chassis to build with. Other option parts that made it into the box are the lightweight suspension kit, an aluminium inner servo mount, an adjustable carbon fibre battery stop, RSD TC6.2 springs, 315 pistons and soft bladders beside other gizmos. The kit is available now for pre-order and will become available end of September to early October.

Click here to view the included option parts

August 6, 2014

Reflex Racing RSD TC6.2 lightweight suspension kit

Reflex Racing introduce the RSD lightweight suspension kit for the Team Associated TC6.2 touring car. The parts not only shave weight, but also offer a revised geometry, with the front arms being wider and the rears being narrower, which makes the car more consistent and faster over a full race compared to the stock components. These parts are also far tougher and do not have quite the slop the stock parts have on the car. Included in the kit, that is available for pre-order now, are front and rear carbon arms, 4 degree C-hubs, rear hub carriers, outer hinge pins, arm shims, AE compatible rod ends and ball cups as well as pivot bushings and king pins along necessary hardware.

Click here to view more photos

May 30, 2014

Reflex Racing RSD7 keyed carbon fibre battery holder

Made for the RSD7 chassis for the Team Associated TC6.2 is this keyed carbon fibre battery holder system. Designed to work only with the RSD7 chassis, the mounting system will have the battery sitting a little bit further away from the belt than the TC6.2 in order to provide better balance and to generate more chassis roll. Included are three carbon fibre mounting brackets and all needed mounting hardware.

Click here to view a photo of the parts in place

May 28, 2014

RSD TC6.2 RSD7 carbon fibre chassis

Available now from Reflex Racing is the RSD7 carbon fibre chassis for the Team Associated TC6.2 touring car. The shape of the chassis has been engineered so that the car can roll and pitch more naturally, increasing the traction and the steering of the TC6.2, which translates into more corner speed and stability. This is further assisted by the reduced width of only 85mm that has been chosen to promote more roll in the corners as well as allow to run a lower ride height when necessary. On top of that the battery position is pushed further back to increase corner entry steering. Other features include mounting holes for an optional and soon available motor mount and drilled holes underneath the front bellcranks allow easy access to the inverted bellcrank screws. Optional keyed-in carbon fibre battery holders are available separately.

Click here to view more photos

May 8, 2014

RSD TC6.2 aluminium chassis & floating servo mount

Reflex Racing introduce the RSD aluminium chassis for the Team Associated TC6.2 touring car as well as an updated floating servo mount. Starting with the chassis that is available for pre-order now, the aluminium item will not only lower the centre of gravity of the car but also helps to dissipate heat generated by the electronics. It comes in handy when running in medium to high-bite conditions as the flex characteristics of aluminium allow to push the car to its limits harder without having to worry about an unstable or unpredictable vehicle. Once released in mid-May there will also be optional battery holders and an optional motor mount available.

Click here to continue reading

February 27, 2014

RSD TC6.2 adjustable body mounts

Reflex Racing now have these RSD adjustable body mounts for the Team Associated TC6.2 touring car available. The set contains two threaded tubes that slide over the original body posts for a rough body height adjustment and then two O-ring equipped support bushings are screwed onto the tubes for near infinite height adjustment. Coming as pair the body mounts also allow for body angle adjustment in order to bias the downforce.

Click here to view a photo of the body mounts in place

February 24, 2014

RSD TC6.2 8-piece spring set

Reflex Racing introduce the RSD TC6.2 spring set for Team Associated’s latest electric touring car. Containing four different rates of 13.0, 14.0, 15.0 and 16.0 lbs the set is designed to cover the needs of carpet and asphalt racing alike without being too complicated. The springs are made from optimised diameter spring steel, 25mm long and they offer an oversize diameter of 13.5mm. They are meant to provide better bump compliance, more corner speed, a smoother feel and better fitment. Black of colour the springs are colour-coded for easy identification and the set is available now.

Source: Reflex Racing [reflexracing.net]