Red RC » Robitronic

March 4, 2011

Robitronic Smasher Short Course truck

The Smasher marks Robitronic’s foray into the short-course arena. Straightforward, bold faced and with loads of top-features to boot, the Smasher really appeals to newcomers and rc-enthusiasts eager to experience real racing atmosphere!. Designed as a 2wd short course truck, the Smasher builds upon the typical chassis optimized for extra ground clearance, supported by extra long a-arms and oil-filled shocks to stomach any terrain, you might want to race the Smasher on.

View more details and images here

February 22, 2011

Exotek Racing AVX LiPo chassis

Exotek Racing have released the new AVX LiPo chassis for the Robitronic Avid 2 touring car. This high performance multi adjustment ultra narrow LiPo chassis is only 90mm wide across and at 2.25mm thick it improves flex all while reducing the overall center of gravity over the stock chassis. The new design allows for 2 side ways battery mounting positions and 2 front or back battery mounting position while the 3 piece battery cups insures tweak free secure battery mounting.

View more images of the chassis here

February 5, 2011

Toy Fair 2011 – Robitronic

Robitronic were keeping tight wraps on their all new prototype competition 1/8th scale 4wd buggy, only allowing selective photos to be made. The new car is a completely purpose built platform for the BL class and features some very nice features. The backbone of the chassis plate is an aluminium center strut with angled carbon plates on either side that create a V shape to the bottom of the car for extra ground clearance and better stability in the air. The drivetrain resembles that seen on a modern 1/10th 4wd buggy with an ultra efficient straight shaft configuration that enables a saddle pack mounting configuration to accept two 2S LiPo packs using their neat battery mounting brace system.

Click here for more information and photos

January 28, 2011

Robitronic ‘Grunged’ casual wear

New casual race wear from Robitronic with the release of their ‘Grunged’ design t-shirts and hooded sweater. Both items are made from high quality comfortable materials, 100% Cotton and 80% Cotton/20% Polyester mix respectively, and feature this new print on the front, while the back of both sport the Robitronic company logo. Available in sizes S-XXL.

Source: Robtironic [robitronic.com]

January 20, 2011

Robitronic 5500mAh 60C competition 1S LiPo

Robitronic have introduced this new 1S competition LiPo pack specifically designed for 1/12th scale pan cars. This latest generation 5500mAh 60C 3.7V battery has extra low resistance to keep higher voltage for the complete run and comes fitted inside a secure hard case. It also features 4mm connectors for the lowest contact resistance.

Source: Robitronic [robitronic.com]

January 16, 2011

Robitronic 1/8 BL pinion gears

More new items from Robitronic with the release of these module 1 pinion gears for 1/8th BL motors with a 5mm shaft. Available in a wide range of teeth from 10T to 22T, they are made from hardened steel to cope with the power from the brushless motors and come supplied with a set screw.

Source: Robitronic [robitronic.com]

January 16, 2011

Robitronic LiPo stick packs

Robitronic have released a range of high performance LiPo stick packs. Available in 3000mAh/20C, 3000mAh/25C, 4100mAh/25C and 3600mAh/50C, their protective hard case with rounded corners means it can easily fit into places that were designed for NiMh packs. Supplied with Tamiya connector and EH balancer.

View the other packs here

December 10, 2010

Robitronic Mini-Z ball bearing set

New from Robitronic for your Kyosho Mini-Z is this oiled ball bearing set. Sanctioned for use in most stock-class races, these bearings not only enhance your runtime but also push your lap times considerably. Complete set includes 4 x 2x6x2,5mm and 3 x 3x6x2,5mm bearings.

Source: Robitronic [robitronic.com]