Red RC » SkyRC

November 30, 2014

SkyRC Ultimate 1000W multi-chemistry charger

SkyRC introduce the Ultimate 1000W DC multi-chemistry charger for the use with up to 8S LiPo or 20 cell NiMH battery packs. The high-output charger offers up to 40A of charge current at 11V to 30V input, allowing to super-swiftly charge 4S to 6S battery packs for 1/8th and 1/5th scale vehicles. A special LiHV mode for new generation Lithium-Polymer batteries lets the user enable a cell end voltage of 4.35V while the charge end voltage for standard LiXX batteries is user adjustable. The balance charger features 10 charge and discharge profiles, several cell monitor functions such as an internal resistance test as well as the usual range of safety features. All charge parameters can additionally be monitored using SkyRC’s Charge Master software that also helps to update the firmware, and the charger is furthermore remote controllable using the company’s optional Wi-Fi Module and an iOS or Android mobile device.

Click here to view the specifications

June 10, 2014

SkyRC B6 mini 60 watt DC charger

SkyRC B6 mini 60 watt AC charger

SkyRC introduce the B6 mini, the smaller and upgraded version of the well-known IMax B6. Sporting a super-compact size the charger offers 6A charge current at 60W output for 1 to 6S LiXX packs, 1 to 15 cell NiMH batteries as well as PB batteries while several charge modes such as normal, balance and fast charge for LiXX batteries make for swift and convenient charging. The device also features a build-in balancer, 10 different charge/discharge profiles, a battery resistance meter and several safety features. Using a PC interface and SkyRC’s Charge Master software all of the important parameters can also be monitored on a Windows-based PC.

Click here to view the specifications

May 9, 2014

SkyRC nitro engine heater

SkyRC now have a nitro engine heater available. Fitting all .19 to .26 nitro engines, the heater is powered by a 12VDC power source such as respective battery packs or a power supply and it pre-heats the engine to 60°C to 70°C within 10 minutes. Pre-heating a nitro engine will result in less “pinch”, the engine is easier to start and both the engine and glow plug will wear less compared to a “cold” start. Made from tough fabric an upper access port allows to insert a glow plug igniter or thermometer. Included with the heater comes a XT60 DC adapter wire.

Source: SkyRC [skyrc.com]

April 16, 2014

SkyRC S-Pro4 brushless short course motor

Following yesterday’s announcement of the 2-pole S-Pro2 brushless short course motor SkyRC now also introduce a 4-pole variant. Built around a T6 billet aluminium heatsink can the motor is of a 4-pole/12-slot design and features neodymium magnets, a sensored design, high RPM oversized bearings and high-purity copper windings. The motor is compatible with sensored and sensorless motors alike, it measures 38×63.5mm and comes in five kv variants from 4300kv down to 1850kv.

Source: SkyRC [skyrc.com]

April 15, 2014

SkyRC Ares S-Pro2 short course brushless motor

SkyRC introduce the Ares S-Pro2 competition brushless motor for 4WD short course trucks. The motor is designed around a CNC-machined T6 billet aluminium heatsink can and features a 2-pole/3-slots setup, 5mm pinion shaft, adjustable timing and heavy-duty solder tabs. It is available in four different specifications as 4.5T/4800kv, 5.5T/4000kv, 6.5T/3400kv and 7.5T/3000kv variant for high-speed down to technical tracks and usable with sensorless and sensored controllers alike.

Source: SkyRC [skyrc.com]

April 8, 2014

SkyRC Toro 1S120 1/12th scale brushless ESC

SkyRC introduce the Toro 1S120 brushless speed controller for all racing classes that use 1S LiPo batteries. The speedo features a built-in DC booster to do away with the need to run a 2S receiver battery while an internal capacitor module replaces the external capacitor board. The controller has a 3.5T motor limit, features a 6V/3A BEC system, a built-in on/off switch and an easy access programming socket. The large array of software features including boost and turbo functions is adjustable using SkyRC’s own PC interface or an optional programming box.

Source: SkyRC [skyrc.com]

March 26, 2014

SkyRC infrared thermometer

The SkyRC infrared thermometer helps to measure the temperature of nitro and gas engines, electric motors, speed controllers, battery packs and many more. The handy device offers 3-button operation and features a large, back-lit LCD screen to display temperatures from -40°C up to 380°C as well as the respective °F range. Offering four modes including a quick and scan mode the thermometer also stores the highest and lowest temperature and it is housed in a sturdy and ergonomically shaped plastic case.

Source: SkyRC [skyrc.com]

March 24, 2014

SkyRC Toro TS50 brushless sensored ESC

New from SkyRC comes the Toro TS50 sensored brushless speed controller. The lightweight ESC is good for the use with down to 8.5T motors in on-road cars and 11.5T motors in buggies due to his 50A rating. The controller features a blue anodised aluminium heatsink case, it can take an optional fan unit and offers a 6V/2A BEC system. It can be widely programmed using the on-board programming feature or SkyRC’s optional programming box or SkyLink USB interface to adapt the punch and brake curves to your liking.

Source: SkyRC [skyrc.com]