Red RC » SkyRC

January 24, 2014

SkyRC Ares Pro brushless motor

SkyRC introduce the Ares Pro competition brushless motor line. The 540-size motors make use of a vented T6 aluminium heatsink case and they feature high purity copper windings, heavy duty solder tabs, sintered neodymium magnets and dual sensor ports. The motors are build to meet ROAR and IFMAR rules and the very low turn variants come with a radial fan unit in the front end bell. Versions available include windings from 3.5T up to 21.5T with special stock motors and “even” 4.0T and 5.0T offerings hitting the shops also.

Source: SkyRC [skyrc.com]

November 14, 2013

SkyRC Quattro Micro battery charger

New from SkyRC comes the Quattro Micro battery charger for the use with many Micro-type batteries. Offering four individual charging ports with LED displays and adjustable charging rates of 0.1A up to 1.0A the ACDC device is ideal for the use with Losi micro battery packs and it also fills the flight batteries of Walkera, MX and mCPX aircrafts if you wish to play around a little bit between the heats during a race. The displays state the capacity, voltage, charging current and the pack’s status while the charger itself features a vast amount of safety features such as short circuit, over current, reverse polarity and DC input voltage protection.

Source: SkyRC [skyrc.com]

November 7, 2013

SkyRC Toro SC120A brushless speed controller

SkyRC introduce the Toro SC120 Competition brushless speed controller. Designed for the use in 4WD short course trucks the speed is able to handle up to 4S LiPo set-ups, it features a 6V/3A linear BEC system and it works with sensored and sensorless motors. The case measures 57x38x35mm and it can be taken apart to replace the internal fan unit while the heavy-duty gold-plated solder towers allow the use even of very thick silicone wires. The on/off switch is of a dust-protected electric type and the controller is highly adjustable using 10 user-modifiable profiles that can be tweaked using an optional programming box or a PC interface.

Click here to view the specifications

September 5, 2013

SkyRC RacingStar tyre warmer

SkyRC introduce the RacingStar tyre warmer for 1/10th on-road cars. The microcomputer controlled unit allows the independent heating of all four tyres in a temperature range of 20°C to 80°C in order to extract the maximum performance from the tyres right from the start. Housed in a red anodised aluminium case the tyre warmer offers a back-lit display, four LEDs and eight beep tones to monitor and control the settings. The unit is designed to fit on top of the recently announced eFuel 17A power supply and can also be powered by a 3S LiPo battery allowing to take it to the starting grid when needed. Included in the set are the RSTW control unit, front and rear tyre warmers and a DC input cable.

Click here to view the features and another photo

August 29, 2013

SkyRC RS16 charger & 17A power supply

SkyRC introduce the RacingStar RS16 charger and the eFuel 230W/17A power supply. Starting with the charger, the multi-chemistry device is of very compact dimensions and features a back-lit display and a single push joystick for flicking through the menu. With it’s 180W circuitry the charger can fill 1S to 6S LiXX, 1 to 15 cell NiXX and 2V to 20V Pb battery packs with up to 16A charge current while offering a heatsink design case, built-in balancer and an optional temperature sensor port. The DC charger is powered by 11V to 18V power sources and designed for the use with the new eFuel 230W/17A power supply as both devices can be stacked and coupled together using two dual banana plugs.

Click here to continue reading

July 4, 2013

SkyRC Cheetah 60A motor & ESC combo

SkyRC introduce the Cheetah 60A sensored brushless motor and speed controller combo set. Based around a 60A speedo the set targets cost oriented 1/10th and 1/12th scale stock racers. The controller is useable with 2S to 3S LiPo batter packs, offers a 6V/3A BEC system, optional fan unit, direct solder tabs, an integrated on/off switch and easy programming via the included programming card that allows the adjustment of parameters such as cut-off voltage, brake and punch settings. Part of the set is also a rebuildable sensored brushless motor with 12.5mm rotor, vented can design and pre-soldered connector tubes. The combo set is available with your choice of a 8.5T or 10.5T to 21.5T stock motor.

Click here to view more photos

June 10, 2013

SkyRC eFuel 1200W power supply

SkyRC introduce their eFuel 1200W/50A power supply with an adjustable output voltage of 15V to 30V. The device is useable with an input voltage of 100V to 240VAC and allows the operation of various chargers at the same time. In addition to the 50A main DC output the charger offers three independent and switched 10A outputs and two 5V/2.1A USB ports. The output voltage is adjustable via a dial and clearly shown on a large LC display along the actual current. Two temperate controlled fans keep the power supply cool even under full load or in high ambient temperatures. Sporting dimensions of 305x170x85mm the device weights 3.1kg and it comes in a tough aluminium case.

Click here to view another photo