Red RC » Team Associated

September 23, 2015

Pro-Line B5M Predator & Flow-Tek Fusion SC bodyshell

Pro-Line have introduced two new bodyshells, the Predator B5M buggy body as well as the pre-cut Flo-Tek Fusion short course truck bodyshell. Starting with the Predator, the design was originally developed for the RC8B3 and has now been scaled down to fit perfectly on Team Associated’s mid motor 1/10th 2WD buggy. The Predator features a sleek and low-profile front cab and a rear section the will fit any transmission configuration including 3-gear and laid down styles. It takes design features from both Phantom and Type-R designs to create a whole new look with balanced performance in any condition. As usual the body comes clear, including window masks and a decal sheet.

Continue reading here

September 22, 2015

Team Associated B5 series FT aluminium gear cover

Coming from Team Associated and made for 5th generation 1/10th off-road vehicles such as the B5/5M, T5M and SC5M is the Factory Team aluminium gear cover. It replaces the cover found in the optional gear diff kit and the aluminium material will prevent warping, providing a tighter seal than the current cover, and longer run times between maintenance.

Source: Team Associated [teamassociated.com]

September 22, 2015

Schelle B5M rear pull hinge pins & SC5M protector

Schelle Racing Innovations have new option parts for the Team Associated B5M and SC5M off-road vehicles available. Starting with the buggy part, the new rear pull hinge pins are the perfect complement to the aluminium arm mount D Schelle released in early this year. With some slight trimming to the B5M plastic rear bumper racers can remove the carbon fibre rear cap and remove the rear hinge pins and arms without taking any screws off of the chassis bottom. The pins are 3.5mm diameter chrome steel with a hard Titanium Nitride coating. The pins fit all B5M, B5M Factory Lite, T5M, and SC5M vehicles equipped with the Schelle arm mount D. Also new is the chassis protector for the SC5M short course truck. Being an authentic UpgradeRC product the decal is printed on quality 18 mil thick vinyl with aggressive adhesive and each package contains the chassis protector and two replacement rear skids.

View more photos here

September 15, 2015

JConcepts B5 series servo mount bracket

JConcepts have introduced a special servo mount for Team Associated’s fifth generation off-road vehicles. Constructed of billet aluminium and available in either blue or black colors, the part offers benefits over the stock mount configuration. First, the mount fits snug inside the chassis servo mounting area increasing the support across while the two screw mounting locations are beefy in design and zeroed in for a direct mount to that chassis. Second, the bracket has locations on each side for included 3x6mm setscrews to help align and maintain servo position during racing conditions, crashes and hard hits. The set screws are intended to touch-off against the servo case and provide additional support keeping the servo in the intended position which helps maintain consistent steering trim. The servo mount bracket can be installed without any modifications or additional equipment in the 5-series of vehicles, such as the B5, T5 and SC5, and immediately brings peace of mind to the detail-oriented racer.

View more photos here

September 14, 2015

Schelle B5M Factor Lite & B5 ceramic ball bearing sets

Schelle Racing Innovations have expanded their Black Diamond series ceramic ball bearing sets to include a B5M Factory Lite Car set and a B5 axle set. The Factory Lite Car set includes all 14 ceramic bearings for the gearbox and four Axles to roll on low-drag ceramic balls. On top of that, the set includes ten Onyx chrome steel ball races to cover the steering bellcranks and diff internals. The ceramic axle set contains eight ceramic bearings to equip the front and rear axles with premium Black Diamond Ceramic bearings. The set fits all B5, B5M, B5M Factory Lite, T5M, and SC5M vehicles.

View the B5 series axle bearing set here

September 14, 2015

Team Associated RC8B3 Fox shock bodies

Coming soon from Team Associated are Fox shock bodies for the RC8B3 buggy. These Kashima-coated shock bodies have the same attributes as the shock coat found on the buttery-smooth Fox Factory Series forks and shocks, providing extended life and silky-smooth shock action. The bodies are available as 30.5mm and 39.5mm variant and they fit both the nitro-powered RC8B3 and the electric-propelled RC8B3e.

View the rear shock bodies here

September 9, 2015

Schelle B5M aluminium C suspension mount

Coming from Schelle Racing Innovations and made for the Team Associated B5M, T5M and SC5M is an aluminium C suspension mount. Weighing in at only 5 gram the CNC-machined part is available in black or blue anodising and while adding security and durability it also allows to change the toe-in and anti-squat inserts without removing the mount from the chassis.

Source: Schelle Racing Innovations [schelleracing.com]

September 4, 2015

Mckune Design FR4 high bite vented slipper pads

Mckune Design have released their new FR4 vented slipper pads specifically designed for carpet, astro turf, and high bite clay. CNC-machined from FR4 epoxy fiber glass, the innovative vented design provide a consistent feel throughout the run without fading. They are available now for Team Associated, Yokomo, Kyosho, Schumacher, and Xray off-road vehicles.

Source: Mckune Design [mckunedesign.com]