Red RC » Team Associated

November 14, 2014

FTW B5M Reactor bodyshell

For The Win introduce their Reactor bodyshell for the Team Associated B5M mid motor buggy. Striking the optimal balance between aggressive down force and stabilising side force, the body offers a somewhat mild cab forward design and large side windows that make it stand out. For 17.5 Stock racers with motors geared to the ragged edge, a moulded air intake is included which, when bolted to the body with the included feather-weight nylon hardware, channels fresh air directly into the motor area and also the speed controller, if mounted inline. Included with the body come two Fulcrum wings, a set of window masks and a decal sheet.

Click here to view more photo

November 14, 2014

Exotek B44.3 10 degree alloy caster hub set

Exotek introduce a 10 degree alloy caster hub set for the Team Associated B44.3 buggy. The updated design offers vertical ball end mounting for quick roll centre adjustments by adding or removing spacers. The included 2mm spacers set the roll centre at the stock geometry with the 10 degree caster hub is set at the stock angle. Additionally the hubs offer adjustable steering arm lockout settings and an optional set screw placement against the hinge pin using a 4/40 set screw. The C-hubs are coming as pair, they are polished and anodised in factory blue and laser etched for easy left right identification.

Click here to view more photos

November 13, 2014

Team Associated 61mm 1/10th buggy wheels

Team Associated announce the soon release of their new 61mm disc wheels for 1/10th scale 2WD and 4WD buggies. They are designed to fit the new generation of buggy tyres, they are light of weight, offer pre-drilled vent holes and a rough, textured gluing bead for enhanced adhesion. A glossy finish helps to prevent the wheels from staining over time. The wheels sport a 12mm hex design and are available as 2WD front, 4WD front and general rear wheels in white and fluorescent yellow colour.

Click here to view the other new wheels

November 11, 2014

PSM B44.3 Shorty Conversion chassis with AirMount

German carbon fibre specialists PSM introduce a shorty conversion carbon fibre main chassis kit for the Team Associated B44.3 4WD buggy. The set was designed with the goal to bring back a slightly softer chassis to the buggy in order to improve performance especially on low to medium-bite surfaces thanks to higher torsional flex compared to the standard aluminium chassis. Included with the 2.5mm main chassis comes PSM’s AirMount battery location system that keeps the shorty LiPo pack in place without disrupting equal left to right flex while being light of weight at the same time. An optional battery tray set for saddle pack LiPos is available also for those who opt to run a more conventional layout. Overall the chassis set scrubs around 60g of weight allowing to add balancing weights where needed. Included with the set comes the main chassis with centre brace, left and right hand shorty LiPo braces, the AirMount system as well as threaded inserts and all needed hardware.

Click here to view more photos

November 8, 2014

Schelle D413 stretch chassis & B5M titanium screw set

Schelle Racing Innovations introduce new option parts for the Hot Bodies D413 and the Team Associated B5M. Starting with the D413 Stretch Chassis Set, the Kurt Wenger designed part offers a lengthened wheelbase to improve the car even more. The buggy in kit chassis length pitches very quickly front to rear when entering and exiting turns and drivers are also aware that in shorty configuration the D413 can struggle with exaggerated throttle response in the air.

Click here to continue reading

November 6, 2014

Schelle B44.3 carbon fibre shorty LiPo battery strap

Schelle B44.3 carbon fibre shorty LiPo battery strap-1

Coming from Schelle Racing Innovations and made for the Team Associated B44.3 buggy is the carbon fibre shorty LiPo battery strap. The part is cut from 2.5mm USA-made carbon fibre and a direct replacement for the kit’s plastic unit, keeping the easy to use pivot ball and twist knob for removing the battery to charge. The strap weighs only 4.7g and it comes including a Schelle mini decal.

View an image of the mounted strap here

November 4, 2014

Team Associated B5M 3-gear transmission

Team Associated’s new B5M 3-gear transmission provides the spec class racer with a lightweight/low rotating mass option to improve drivetrain efficiency. It also features a new, smaller, lightweight top shaft which uses smaller diameter 5x10x4mm bearings for additional weight savings. The 3-gear transmission is also a great tuning aid for modified class racing on high-grip tracks because the gyroscopic effect of the motor is reversed, making the car stay flatter in the corners. The 3-gear transmission requires the dedicated top shaft, gear box, gear cover, and either the black or blue 3-gear motor plate, all sold separately.

Click here to view the 3-gear specific parts

November 3, 2014

Imbue 12mm brass shock pistons

Hot on the heels of the 1/8th scale brass shock pistons Imbue announce the release of 12mm 1/10th variants. The pistons are meant to improve bump handling, they make for plusher landings and smoother vehicle response. Initially available in 3×1.35mm hole configuration, the hole selection works well on both outdoor and indoor tracks, with tapered holes on one side to allow tuning for faster rebound or dampening. Included are standard and tight fit sealing bands for a perfect fit and to eliminate blow-by and friction. The pistons fit TLR, Associated, and Kyosho vehicles as well as and other brands that utilise a 3mm mounting shaft.

Source: Imbue [imbuemotorsports.com]