March 15, 2017

T-Works B6 carbon battery strap & steering block arms

Coming from T-Works and made for the Team Associated B6 and B6D are a carbon fibre battery strap and several steering block arms. Starting with the battery strap, the part is machined from high-quality carbon fibre and its design allows for a wide range of battery positions. Five outer holes make the brace usable with B6 and B6D specific gearbox layouts while long holes for the included battery stoppers make it possible to further fine-tune the weight bias. The strap also offers three different mounting positions for an optional tie-rod chassis stiffener.

Continue reading here


March 15, 2017

Schelle B64 CF options & B6 Delrin front wing mount

Schelle Racing Innovations have introduced a range of carbon fibre option parts for the Team Associated B64 buggies as well as a Delrin front tower wing mount for the B6. Starting with the B64 options, first up is a carbon fibre battery strap made from 2.5mm USA-made sheet material. Lighter and more rigid than the kit part, the battery strap is also of an updated design that runs parallel to the centreline of the battery for a cleaner look. The part works with the existing pivot ball and blue aluminium thumb screws or with flat head M3 screws for the low-profile look.

Continue reading here


March 14, 2017

JConcepts S2 B64-series buggy body shell

JConcepts have introduced the S2 body shell for the Team Associated B64 series of 1/10th 4WD off-road buggies. Sporting the distinctive Silencer 2 design with slammed overall height and a progressive cab design the body is meant to deliver good balance and steering. A channeled roof directs the flow through the center of the body while also increasing the rigidity of the cockpit. The dual side-window design that has become famous on the JC bodies remains to bring a traditional feel to the layout. The upper side-pods feature distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days at the track. Carved and detailed side-pods edge the body, giving the highly aero unit a stylish look with a tight fit and finish. The body fits both the B64 and B64D and it comes clear, including window masks, decal sheet and two Aero rear wings.

View more images here


March 14, 2017

Vision Racing T5M & SC5M “laydown” rear shock tower

Vision Racing have introduced a special rear shock tower for the Team Associated T5M and SC5M trucks that allows to run the B6-series laydown transmission in both. The tower is cut from high-quality 4mm quasi-directional carbon fibre and its design allows to convert the older T5M and SC5M to utilise a modern laydown gearbox with minimal modifications.

Source: Vision Racing [visionracing.net]


March 13, 2017

Team Associated B64 Team Kit 1/10th 4WD buggy kit

Team Associated have introduced the B64 Team Kit 1/10th scale 4WD kit. Sharing the design as well as most features with the already released B64D buggy, the B64 is aimed towards racing on medium to high-bite surfaces, excelling on high-traction surfaces with the buggy’s adjustable axle height and roll centres result in a stable yet nimble platform. With a new and improved centre slipper using Low Coefficient Friction LCF pads, the B64 rewards the driver with maximum drive out of all four wheels on artificial turf and carpet surfaces. Other features include V2 12mm big bore shock absorbers, front and rear anti-roll bars, strengthened front and rear suspension with hard anodised caster blocks and carbon fibre shock towers as well as a Team Associated bodyshell and a JConcepts-made screw-on rear wing.

View the features and more images here


March 8, 2017

JConcepts 3-D-printed wire route sleeves

Coming from JConcepts are three new 3-D-printed wire route sleeves. The unique and small design of the wire sleeve pieces allow wiring to look clean and also aides in the overall appearance of the vehicle. First up is the 3-wire sleeve and motor ring that is made specifically for the Team Associated B64. It brings the A, B and C wires in close to the motor without touching. The built-in ring holds the wires in a clean position and minimises the height providing a little more room between body and wiring.

Continue reading here


March 7, 2017

Associated B64 long rear shock tower & battery strap

Team Associated have introduced new optional carbon fibre parts for the B64 1/10th 4WD buggy in the form of a long rear shock tower and a carbon fibre battery strap. Starting with the shock tower, the tall rear shock stay accommodates the longer and higher-capacity 31mm shocks for better compliance with very bumpy or loose tracks. Also new is the Factory Team series carbon fibre battery strap. Cut from 2.5mm bi-directional woven carbon fibre the strap fits the B64-series cars and it is a lightweight and stylish replacement for the stock item.

View more images here


March 4, 2017

Schelle Racing Innovations B64 ball bearing sets

Schelle Racing Innovations have three new ball bearings sets for the Team Associated B64 added to their lineup. First is the Onyx series 22-pieces set for kit replacement. Second are the Black Diamond Ceramic bearings kits that are offered as a 10-pieces B64 gearbox set or an 18-pieces complete car set to outfit the gearboxes and all four axles. The complete car set also includes eight Onyx bearings for the steering system. The Black Diamond ceramic bearings are precision manufactured to ABEC-3 standards, lubed with premium bearing oil and they feature two metal shields for minimum drag, making them ideal for stock 17.5 and 13.5 4WD racers looking for some extra speed.

View the other bearing sets here


Tonisport
Mibosport
LC Racing
VP Racing
T-Works