Red RC » Xray

September 15, 2017

Xray T4 2018 electric touring car kit

Xray have introduced the 2018 version of their highly popular T4 1/10th scale 4WD electric touring car. Like in recent years Xray have carried out some subtle updates and revisions to the platform with the most noticeable change to the 2018 variant being the all-new Ultra Low Profile ULP shock – probably the shortest coil-over dampers to find on a 1/10th touring car. 4mm shorter than the SLP the ULP were developed to lower the CG of the car even more to further improve handling. With the ultra short shocks the T4 is meant to stay flatter, making it easier to drive through chicanes in high-grip conditions and making the car more resistant to traction rolling, letting the driver carry more speed through high-traction sweepers while the steering response and cornering speed are significantly improved as well.

Continue reading here

September 8, 2017

Sun Young Hwang teams up with Xray

Xray have announced the signing of Korean Nitro Off-road frontrunner, Sun Young Hwang to their team. Multiple national champion since 2005 Hwang also achieved 1st place finishes at events such as the 2017 O.S. Engines Challenge and the DCRC Challenge and he has the following to say about the deal:

I think it is my greatest honor in my life to be an Xray Factory driver. I will do my best to honor the brand and performance with Xray vehicle in Korea. I would like thank to Team James Racing (James Park) and Xray staff. I hope this would be a good example for the next-generation drivers.

Source: Xray [teamxray.com]

September 7, 2017

Xray 64 pitch 72T & 75T pan car spur gears

Xray have introduced two new 64 pitch spur gears for 1/12th and 1/10th pan cars. They come in 72T and 75T specification and add to the already existing 76T to 96T gears. The smaller sizes are ideal for all stock racing classes and the gears come precision-moulded from high-quality composite material.

View the 75T gear here

September 6, 2017

Xray T4 2018 electric touring car kit – Coming soon

Xray have announced the forthcoming release of the T4 2018 electric touring car kit. As usual no official details are available beforehand but the full presentation with images and features should surface soon.

Source: Xray [teamxray.com]

September 5, 2017

Xray X12 US Spec aluminium bushings

Xray have introduced two additional sets of aluminium front suspension bushings for the X12’18 US Spec 1/12th scale pan car. Adding to the standard setting are 0.5mm and 1.0mm specifications that help to either narrow or widen the track width, depending of the orientation. The bushings are machined from high-quality aluminium, they come orange anodised, are marked for easy identification and they come in sets of two.

View the 1.0mm bushings here

September 4, 2017

RDRP XB4 aluminium caster block sets

Revolution Design Racing Products have introduced their new caster block sets for the Xray XB4 series of 1/10th scale 4WD buggies. An improvement over the original construction the hubs allow to easily adjust the camber link ball stud position and thus camber link length and roll centre by simply adding or removing shims. The multi-piece design was used on rear uprights before and is now available for the front hubs. While offering the standard kit geometry the hubs also allow to run shorter links which can be beneficial in a range of track conditions. The lightweight design and aircraft-grade 7075-T6 aluminium adds only minimal unsprung weight while still being sturdy and durable. RDRP’s C-hubs are usable on all XB4-series buggies and they are available in a 9 degree or 12 degree variant to adjust the corner characteristics of the buggy.

View more images here

September 1, 2017

Hiro Seiko introduce new lightweight screw kits

Coming from Hiro Seiko are new lightweight screw kits for the Xray X10 and X12 series of pan cars as well as the new Xpress XQ1 and the Awesomatix A800X. The X10’18 related kits come as mixed aluminium and titanium or full titanium sets that save 15.5g or 12.6g of weight respectively. The X12’18 kits also come as mixed or full titanium sets, scrubbing 15.5g or 12.2g respectively with the mixed sets including orange anodised aluminium and natural finish titanium fasteners. Swinging over to the touring car sets, the fastener kit for the XQ1 saves about 29g for the mixed and 21g for the all-titanium set while the A800X assortments scrub 23g with the mixed and 18.5g with the all-titanium kit. The mixed sets use red alloy screws for the XQ1 and gold-anodised fasteners in the mixed Awesomatix set.

View the other screw sets here

September 1, 2017

West Coast R/C Works X12 servo & upper pod plates

The newest addition to West Coast R/C Works’ Black Carpet Edition line of parts are the servo mounting plates and short upper pod plate for the Xray X12 pan car. Starting with the servo mounting plates, these are designed to replaces the original parts and the bolt pattern of the plates ensure that the servo is mounted correctly on the chassis. The BCE plates are an addition to the already existing line of X12 servo mounting plates and the difference between the existing and the BCE version is that the new version has eleven shock mounting positions instead of only four on the original part. The additional shock mounting positions allow the shock to be moved further back on the chassis and it also allows use shocks from other manufacturers. The servo mounting plate is available with bold patterns to directly mount the Futaba 9650/9670, Futaba BLS671SV/ BLS671SVi or Sanwa SRG-HR/HS servos.

Continue reading here