Red RC » Xray

March 2, 2017

JConcepts Finnisher MBX-7TR body & XB2 gear shield

JConcepts have introduced the Finnisher body shell for the Mugen MBX-7TR as well as a 3-D-printed gear shield for laydown transmission equipped Xray XB2 buggies. Starting with the body, the popular and ROAR nationals winning Finnisher design is now also available for Mugen’s MBX-7TR truck. The slight cab forward design with a raked windshield makes the truck stand out as does the large centre fin which adds stability at high speeds. The Finnisher has a built-in air escape passage on the roof which allows the customer to fine-tune the body for maximum performance the included champion rear name plates provide additional high-speed stability and improved positioning of the rear bed rails to strengthen the assembly. Overall handling has been improved by balancing the bias between the cab location and rear wing placement which control the majority of the aero affects of the aggressively styled body.

Continue reading here

March 1, 2017

Exotek XB2 RF brass suspension mount

Coming from Exotek is a RF brass suspension mount for the Xray XB2 series of vehicles. It quickly adds weight to the rear of the vehicle for improved rear traction and stability – for example when running the carpet laydown gearbox on dirt tracks. The part maintains the stock geometry, it adds 24g of weight and comes with a protective black coating.

View another image here

February 24, 2017

Xray tease RX8 2017 1/8th nitro on-road kit

Xray have released a first teaser of the forthcoming RX8 2017 1/8th scale nitro on-road car. As usual no official details are available prior to the release, that is set for sometime in March, but we keep you up to date on all information as soon as they surface.

Source: Xray [teamxray.com]

February 24, 2017

Nikos Georgiadis joins Xray factory team

Xray have announced the signing of multiple Greek national champion, Nikos Georgiadis to their factory team for the 2017 season. Nikos has been a long time Xray privateer and for the 2017 season he will be enjoying full factory support. Nikos is focused on 1/10th on-road racing and will compete at all the major national and international races and he had the following to say:

I have only the best experience with Xray as a private driver and thanks to the performance and reliability I was able to achieve all my current wins and victories. Signing my contract as an Xray factory driver is an excellent moment in my racing career that will hopefully boost my experience and knowledge further. I will continue to share the knowledge and experience with local RC drivers and will continue to support this sport. Big thanks to Xray for this opportunity and a new challenge for me to be part of a truly high-end international RC car racing family and the best team on planet. I’m looking forward to the 2017 season with Xray.

Source: Xray [teamxray.com]

February 22, 2017

Xray NT1 2017 200mm nitro touring car – Coming soon

Xray have released a first teaser image of their forthcoming NT1 2017 1/10th 200mm nitro on-road kit. As usual official details will not become available until the release that is scheduled for March and thus just in time for the new outdoor season.

Source: Xray [teamxray.com]

February 21, 2017

Fenix TC7.1 & X1-series aluminium chassis

Fenix have introduced new aluminium chassis for the Team Associated TC7.1 and Xray X1 cars. Starting with the touring car chassis, the lower main plate is machined from 2mm 7075-T6 material and it offers extensive machining for a low weight and optimised torsional flex characteristics. 85mm wide the part is about 2mm slimmer than the standard carbon fibre chassis for less chassis scrub during hard cornering and weighing in at 82g the part also significantly lowers the overall centre of gravity.

Continue reading here

February 17, 2017

Mckune Design T4’17 carbon fibre chassis & top decks

Coming from Mckune Design and made for the Xray T4’17 are a carbon fibre main chassis and two top decks. All parts are cut from high-quality bi-directional carbon fibre with the chassis being 2.25mm thick while the top decks are available in a 2.0mm and a 1.5mm variant. The parts are direct replacements and they are available now.

View the top decks here

February 17, 2017

Xray sign Nico Catelani

Xray have announced the signing of Italian National Stock Champion, Nico Catelani to their factory team. AMSCI and UISP champ as well as multiple ETS finalist, Nico will be attending at the Italian Nationals, the EFRA European Championships and the ETS and he had the following to say:

I am very happy and honored to be a part of the factory Xray team for the next season. The Xray development, quality and performance of their cars as well the best team support is what I have admired and now I am happy to enjoy. I will do my best to continue to improve my racing skills and results and I am more than proud for this for this opportunity. I’m looking forward to the next season with my new team!

Source: Xray [teamxray.com]