Red RC » Xray

May 5, 2016

McKune XB2, XB4’16 & TLR 22 FR4 high-bite slipper pads

McKune XB2, XB4'16 & TLR 22 FR4 high-bite slipper pads

Coming from McKune Design are new FR4 high-bite slipper pads for the Xray XB2, XB4’16 as well as TLR 22-series vehicles. Made from FR4 epoxy fibreglass laminate and offering a vented design the slipper pads are specially developed for all high-bite carpet, astroturf and clay tracks as they show now fading or glazing for a consistent feel throughout the run. The Xray set is a 3-piece package while the TLR 22 specific set, for the 22 3.0, 22 SCT 2.0 or 22-4, includes two pads.

Source: McKune Design [mckunedesign.com]

May 4, 2016

Exotek XB2 CE alloy rear camber mount & rear hubs

New from Exotek come two aluminium option parts for the Xray XB2 series of 2WD buggies. First up is the rear alloy camber mount for the Carpet Edition kit. The part is machined from 7075 aluminium and special countersunk mounting holes insure that the camber angle does not change in hard tumbles. It also helps keep camber plate alignment the same in case the plate is taken off for cleaning or maintenance purposes. A direct fit on the buggy the camber mount is available in orange or black colour. Also new and made for all XB2 series buggies are heavy duty 7075 aluminium rear hubs. Extra durable for high-power applications the parts are polished, anodised in orange or black and they are machined a second time to insure precise bearing fit. The hubs are rounded out by set screw holes for optional M3 grub screws.

View more images here

May 2, 2016

Schelle XB2 chassis protector decal

Coming from Schelle Racing Innovations is a chassis protector decal for the Xray XB2 buggy. Printed by UpGrade RC the pre-cut chassis skin sports numerous Schelle logos and it is made to protect the chassis bottom from becoming excessively scratched or damaged when racing on abrasive surfaces while also keeping the lower chassis screw heads from becoming clogged with dust and dirt.

Source: Schelle Racing Innovations [schelleracing.com]

April 29, 2016

Steven Olsen joins Xray Factory Team

Xray have announced Danish racer Steven Olsen as the latest addition to their Factory Team. The Danish Touring Stock vice-champion will use the company’s T4 touring car in his upcoming campaign that will include the Danish Outdoor and Indoor Nationals, the Nordic Championships as well as selected ETS events. Steven says:

After driving for many different manufactures the last 3 years, I was never really satisfied with the performances of the cars and always missed the performance of my old Xray cars. These experiences caused me to get back to Xray cars. After the testing of the newest Xray T4’16 I had improved my pace from the first battery. This car has so much grip and corner speed and responses very well on setup changes. Driving the best quality cars on the market and the constant development of the cars is very important for me because I just only need to focus on racing and never worry about the durability and quality of the cars. I would like to thank everyone involved in making this possible and I can’t wait to start working together with the team.

Source: Xray [teamxray.com]

April 29, 2016

Xray 21mm composite shock ball ends

Coming from Xray and made for the XB2 and XB4 line of buggies are 21mm composite shock ball ends. 4mm longer than the standard parts they offer increased suspension downtravel, something that can be beneficial especially on bumpy tracks. The ball ends come in sets of two and fit both the front and rear shock absorbers.

Source: Xray [teamxray.com]

April 28, 2016

Radtec T4’16 aluminium main chassis plate

Radtec T4'16 aluminium main chassis plate

Available from May is Radtec’s new aluminium main chassis for the Xray T4’16. Featuring a very common design with herringbone-shaped cut-outs under the battery and electronics compartments the symmetrical chassis is machined from 7075-T6 aluminium and it comes black anodised and with silver edge details. As with all alloy chassis it is intended for the use on high-bite tracks as it offers less torsional flex than a carbon fibre chassis, making the car easier to drive.

Source: Radtec [radtec-rc.com]

April 27, 2016

McFactory X12’16 aluminium chassis & motor pod

McFactory X12'16 aluminium chassis & motor pod

Available now from McFactory Motorsports is a 2.3mm 7075-T6 aluminium main chassis and lower motor pod plate for the Xray X12’16 kit. The chassis will keep the car from lifting the inside tyre on high-grip carpet tracks while also making the car easier to drive at the same time. The parts come machined from high-quality aluminium, they sport silver chamfered edges and are a direct replacement for the stock carbon fibre parts.

Source: McFactory Motorsports [mcfactorymotorsports.com]

April 27, 2016

Yaiba Racing composite driveshaft blades

Yaiba Racing composite driveshafts blades

Coming from Yaiba Racing are three sets of composite driveshaft blades for a range of 1/10th electric touring cars. Made to protect both the drive pins of the driveshafts as well as the differential outdrives, the blades offer high durability and low friction characteristics with the colour-coded 10-piece sets being available for Tamiya TRF418 and TRF419 kits, for the Yokomo BD5 and BD7 as well as the Xray T4 and VBC D07 and D08 kits.

View the Yokomo and Xray/VBC-specific blades here