Red RC » Xray

August 5, 2019

Xray XB8 series eccentric steel IAC bushings

Xray have introduced their new eccentric steel bushings foe the IAC Integrated Adjustable Caster C-hubs of the XB8 series kits. The bushings allow for ±2 degrees of caster adjustment depending on the orientation of the inserts. The bushings are of a keyed design to ensure secure and reliable mounting with the heavy steel construction adding unsprung weight if needed. The bushings come in sets of two and as 0 degree, 1 degree and 2 degrees variants and they are usable for XB8, XB8E, XT8, XT8E, GTX8 and GTXE kits utilising the front C-hub suspension.

View the 1 and 2 degrees inserts here

August 2, 2019

Xtreme Racing T4 carbon flex battery hold down kit

Coming from Xtreme Racing and made for the Xray T4 touring car is the carbon fibre flex battery hold down kit. The set replaces the standard battery mounting system and does away with the need to use tape to hold down the battery pack in favour of a quick release system that only lightly tabs the battery pack, resulting in quicker battery swaps and less influence in chassis tweak. The set includes two battery hold downs, two LiPo battery supports and 6 shooter thumb fasteners along all needed mounting hardware.

View another image here

August 1, 2019

Arrowmax T4 Medius mid-motor chassis conversion kit

Following a first teaser image Arrowmax have announced the release of their new Medius mid-motor chassis conversion kit for the Xray T4 touring car. Using the vehicle in mid-motor mode will increase steering, traction and cornering speed while also making the car easier to drive fast. The chassis conversion allows to mount the steering servo on the left or right hand side, depending on the chosen battery type with the kit being usable with standard, shorty or the new Petite mid-size LiPo battery packs. Included with the conversion, that is available as 2.25mm carbon fibre or 2.0mm alloy chassis variant, is a 2.0mm carbon fibre upper deck, a redesigned carbon fibre servo mount holder, a 7075 alloy single-piece motor mount, redesigned 7075 centre pulleys as well as a chassis stiffener that enables the owner to access different chassis flex settings. The kit, that is usable with 2019 down to 2017 specification T4 cars, is available from now on.

View a list of the features and more images here

July 25, 2019

Bezerk T4’19 2017 height shock towers

Coming from Bezerk and made for the Xray T4’19 are new, taller shock towers that match the 2017 shock geometry. Made from 3.0mm glossy carbon fibre, these towers allow to mount longer shocks from the 2017 specification car to the 2019 model which can be beneficial in bumpier or very low grip track conditions. The geometry replicates the 2017 towers and the two are available as a set from now on.

Source: Bezerk [bezerk.com.au]

July 24, 2019

Bezerk RC XB2 battery hook system

Bezerk RC are busy adding more carbon fibre optionals to their line-up with the latest being a battery hook system for the popular Xray XB2 buggy. Made from glossy 2.5mm carbon fiber, the hooks offer secure fore and aft adjustment of the LiPo shorty battery pack. Unlike slotted systems that can slide forward in a crash, these stay secure with a range of different positions including flipping them over to get the full range of adjustment. An O-ring holds the pack secure enough to keep it in place but also flexible enough to allow for the chassis to flex underneath. The O-ring hooks are centrally located to the battery hooks, so the O-ring is always centrally located to the battery pack.

Source: Bezerk RC [bezerk.com.au]

July 24, 2019

RC Maker T4 & BD9 ceramic/ABEC7 bearing sets

RC Maker have introduced their new ceramic and ABEC7 steel ball bearing sets for the Xray T4 and Yokomo BD9 touring cars. Using ceramic ball races for the drivetrain and ABEC7 steel bearings for the hubs gives the best balance of longevity and performance. The ABEC7 bearings have extremely tight tolerances and prevent developing slop and notchiness, ensuring a smooth and efficient drivetrain for a very long time. The T4 and BD9 sets are available from now on.

View the BD9 bearing set here

July 19, 2019

Arrowmax Medius mid-motor conversion kits

Arrowmax is the latest company to announce the release of mid-motor conversion kits for the popular Xray T4 and Yokomo BD9 touring cars. The Medius called kits base on 2.25mm US weave carbon or 2.0mm machined aluminium chassis with 2.0mm carbon fibre upper decks and they utilise redesigned single-piece 7075 alloy motor mounts and centre pulleys. Included with the kits also come chassis stiffeners that allows to adjust chassis flex to suit current track conditions or driving styles. Arrowmax promise increased cornering speed, traction and steering in addition to improved ease of driving. The kits are meant to ship by the end of the month.

View the BD9 conversion here

July 19, 2019

Xray XT8E 1/8th electric truggy kit

Xray have introduced the latest incarnation of their popular XT8E 1/8th electric truggy kit. The vehicles utilises an all-new front suspension geometry featuring new C-hubs and steering blocks along with new zero king pin steering blocks with exchangeable steering plates for Ackermann adjustment. The drivetrain is equipped with new front and rear CVD drive shafts and the new rear uprights use 8x16x5mm outer ball-bearings for increased reliability and lifespan. The rear shock tower was redesigned to fit the new 40 percent lighter wing mount and the new gearbox brace while a 2.6mm front anti-roll bar improves corner speed. The kit is rounded out by new softer ribbed shock membranes. All that is mounted to a redesigned chassis that is now fully compatible between the XT8 and XT8E platforms.

View a list of the new features and more images here