Red RC » Yokomo

August 21, 2019

T-Works titanium turnbuckles for Yokomo YZ-2

T-Works have announced some option parts for the new Yokomo YZ-2 buggy. The range includes a lightweight 6-piece titanium turnbuckle set, a 102-piece UFO head titanium screw kit as well as 129-piece gold-colour steel screw set. The titanium parts are cut from high-quality 64-grade titanium for a low weight and high strength, ensuring a lower overall car weight and greater corrosion resistance. The gold-coloured steel screws however mainly add visual impact, allowing the ride to stand out.

Source: T-Works [rc-tworks.com]

August 16, 2019

Rebellion-RC Cross-Flex MM aluminium chassis kit

Listening to customer demands, RC-Carbonstore have announced the soon release of the all-new Rebellion-RC Cross-Flex aluminium chassis for their MM mid-motor touring car conversion kits. Of an ultra-low centre of gravity and adjustable flex design the main plate offers basically three chassis in one as it allows to adjust the overall flex to a wide range of track conditions thanks to interchangeable inserts that are held in place using M1x2mm screws. The highly machined herringbone design chassis can be equipped with brass inserts for running in high to very high-bite conditions, lighter and more flexible carbon fibre inserts make for a softer chassis for medium traction conditions and running the chassis without any inserts gives the most amount of flex for lower grip tracks. Mixing and matching the inserts and using more or less screws for fastening also allows to adjust the car’s weight bias and flex in certain areas. Testing of the new design is already underway and the main plate kits, that will become available for Rebellion-RC’s T4, TC7.2 and BD9/BD8 mid-motor chassis conversion kits will be up for grabs in about three weeks’ time.

View more images here

August 15, 2019

Yokomo YD-2RR rear motor conversion kit

Yokomo have introduced the YD-2RR rear motor conversion kit for the YD-2E and YD-2S RWD drift car kits. The set includes new gearbox halves that use a reduced amount of idler gears for better throttle response while an updated motor position, with the motor sitting closer to the rear axle, eliminates the unwanted pendulum effect. The newly designed “swingable” motor plate allows to rotate the motor in order to access different throttle and weight balance setups for a range of track conditions and a resin rear chassis brace offers controlled chassis flex for improved rear end response. The set is rounded out by a set of spacers that brings the body posts to the previous position as the shock tower is moved forward to make way for the spur gear. The conversion is a direct fit on the YD-2E and will fit the YD-2S using optional parts such as the E series upper decks, the Y2-303AR alloy or Y2-303MR plastic rear brace supports and and battery holder.

View more images here

August 2, 2019

Arrowmax BD9 Medius mid-motor conversion kit

Following the release of the Medium mid-motor conversion kit for the Xray T4, Arrowmax now also introduce a kit specific to the Yokomo BD9 touring car. The mid-motor conversion will increase overall steering, traction and cornering speed while also making for easier handling characteristics. The chassis conversion is available as 2.25mm carbon fibre or 2.0mm alloy chassis variant, and it also includes a 2.0mm carbon fibre upper deck, a 7075 alloy single-piece motor mount, redesigned 7075 centre pulleys as well as a chassis stiffener that enables the owner to access different chassis flex settings.

View a rendering of the alloy chassis here

July 30, 2019

Axon YD-series Revoshock dampers

Axon have introduced their new Revoshock dampers the Yokomo YD-2 and YD-4 drift cars. The big bore shock absorbers utilise 11.5mm diameter 16-hole shock pistons that run in HVF-coated threaded alloy shock bodies for ultra low friction. The clearance between the piston and shock body is only 0.025mm, ensuring minimal oil blow-by and thus predictable shock performance. New to the Revoshock is a revolutionary piston shaft seal design with the lower cartridge seals being a lot smaller in diameter compared to industry-standard P3 O-rings, which ensures the seals are not being pinched by the shock body which created a floating design that leads to virtually no friction between the seals and the shock shaft. Specially selected inner diameters of the upper S and lower SS-sized O-rings ensure the shocks are still as leak-free as possible while the HVF-coated piston shaft further reduce overall friction. The result is a shock absorber that is able to generate more traction due to being as smooth as possible. Included in the set come the shock bodies, upper and lower caps, spring pre-load collar as well as the piston rods and pistons. The plastic parts, pivot balls and shock springs are not included as these are parts that can be taken from the donor Yokomo shocks.

View another image here

July 26, 2019

Bezerk YRX12’19 & P12 Evo carbon fibre chassis

Bezerk from Australia have announced the release of new carbon fibre main chassis for the Yokomo YRX12 2019 and Roche P12 Evo 1/12th scale pan cars. Starting with the YRX12 chassis, it is made from 2.5mm glossy plain weave carbon fibre and it offers more flex than the kit alloy or carbon chassis available from Yokomo. This helps with traction on low to medium grip tracks. Also available is a suitable lower pod plate. Over to the P12 Evo chassis, the main plate also offers increased flex over the standard part, however it is additionally available in stiff weave carbon for high grip conditions. A suitable lower motor pod plate is available from Bezerk as well.

View the other new parts here

July 24, 2019

RC Maker T4 & BD9 ceramic/ABEC7 bearing sets

RC Maker have introduced their new ceramic and ABEC7 steel ball bearing sets for the Xray T4 and Yokomo BD9 touring cars. Using ceramic ball races for the drivetrain and ABEC7 steel bearings for the hubs gives the best balance of longevity and performance. The ABEC7 bearings have extremely tight tolerances and prevent developing slop and notchiness, ensuring a smooth and efficient drivetrain for a very long time. The T4 and BD9 sets are available from now on.

View the BD9 bearing set here

July 19, 2019

Arrowmax Medius mid-motor conversion kits

Arrowmax is the latest company to announce the release of mid-motor conversion kits for the popular Xray T4 and Yokomo BD9 touring cars. The Medius called kits base on 2.25mm US weave carbon or 2.0mm machined aluminium chassis with 2.0mm carbon fibre upper decks and they utilise redesigned single-piece 7075 alloy motor mounts and centre pulleys. Included with the kits also come chassis stiffeners that allows to adjust chassis flex to suit current track conditions or driving styles. Arrowmax promise increased cornering speed, traction and steering in addition to improved ease of driving. The kits are meant to ship by the end of the month.

View the BD9 conversion here