September 25, 2007

New Spring sets from Serpent

New Spring sets from Serpent

More new products from Serpent, this time its the release of 2 sets of new series shock springs, which are suitable for use with all current and previous Serpent shock absorbers. Sold in sets of 5 pairs of springs, 1 set contains 23mm length springs, 1mm longer than the older version, for the front of 1/8th scale chassis’ and both the front and rear of 1/10th scale chassis’, while the 2nd set contains 27mm springs for use on the rear of 1/8th scale chassis’. Featuring a new colour rating these new series of springs are of a better quality, coming with ground flat ends, and as they no longer have a colour coating they function more accurately. The spring’s hardness is now identified by the coloured paint on the springs tip.

Click here to see the other spring set… content


September 25, 2007

Serpent 3mm Carbide balls

 Serpent 3mm Carbide balls

Serpent have released these 3mm carbide balls for their new S400 1/10th EP touring car. Sold in a pack of 10, the balls are made from tungsten carbide and are suitable for use in the cars ball differential. These balls are incredibly hard and last much longer than the standard versions thanks to their resistance to flat spotting.

Source: Serpent [serpent.com]


September 24, 2007

Honest Kyosho Spada carbon parts

Honest Kyosho Spada carbon parts

Japanese company Team Honest have released a whole load of carbon parts for Kyoshos 1/12th scale gas powered Pan car, the Spada. The parts include a front upper plate made from 3mm carbon for extra front stiffness, a 2mm thick carbon fibre radio tray, a 2.5mm thick carbon body mount plate, 1.2mm brake plate and 1.5mm thick brake disk from carbon, a 3mm carbon rear upper plate and finally a receiver plate and a battery plate. All parts are of high quality and lightweight.

Click here to see all the products… content


September 24, 2007

All Mod Support Spacers & Clutch plate

 All Mod Support Spacers & Clutch plate

German after market parts maker All Mod have released 2 new products to their range of general and Mugen parts. First up are these engine support spacers for 1/8th scale buggies that when mounted lift your .21 motor by 1mm and this allows you to run the All Mod MSS 28 heavy-load clutch normally meant for use on .28 motors. Also new from All Mod is an aluminium clutch plate for use with the Mugen MTX and MRX range of cars that aids the engagement of the clutch for better power delivery.

Click here to see the clutch plate… content


September 22, 2007

Eagle Racing Pit Mat & 501X parts

Eagle Racing Pit Mat & 501X parts

Eagle Racing have released a number of new products this week with the first being this new pit mat. Made from a high quality rubber material, it is 40 x 60cm in size and weighs 325grams, and is supplied with a velcro strap to allow you to roll it up for transportation. Also new from Eagle Racing are some option parts for the Tamiya TRF 501X 4wd buggy, the first option being a blue anodised aluminium steering linkage which adds extra strength to this assembly. Also new for the 501X are a range of lightweight and strong titanium turnbuckles in various selections as well as titanium screw sets, also available in different amounts.

Click here to see the other products… content


September 21, 2007

Robitronic Aluminium Servo Arms

Robitronic Aluminium Servo Arms

Robitronic have released this new range of durable red anodised aluminium servo arms for 1/8th scale off road cars. The arms feature small screws on the side to ensire a tight mounting on the servo main shaft and are numbered to show which servo they are suitable for. Available for KO Propo, Sanwa, Hitec and Futaba servos.

Source: Robitronic [robitronic.eu]


September 21, 2007

GS Racing 1/8 Off Road Option Parts

GS Racing 1/8 Off Road Option Parts

GS Racing have released a number of new option parts for their range of competition 1/8 Off Road vehicles, including the CL1 and XUT series. First up are these high performance disk brake pads, which are sold in a pack of 4 and improve your buggy’s stopping power. For the CL1 are 2 new parts including a set of special wing spacers made from aluminium and a super strong 5mm thick ball raced steering plate, made from 7075 T6 aluminium which comes in a set including all parts necessary to mount it.

Click here to see the other products… content


September 21, 2007

Team Azarashi Flex deck for 501X

Team Azarashi Flex deck for 501X

Japanese company Team Azarashi have released this flexible top deck option for the Tamiya 501X. Available for both the front and rear side of the central motor assemble the original carbon top deck is replaced with 2 seperate braces, made of dry carbon plate, that allow the car to flex giving more mechanical grip. The user can choose to have them on both the front and rear of the car or just one end, whichever needs it.

Click here to see another picture… content