Red RC » Accessories

December 23, 2014

EX Lab BD7 2015 aluminium main chassis

Excellence Laboratory or EX Lab in short is a new company specialised in designing and manufacturing premium option parts for competition touring cars. Available for pre-order now is EX Lab’s first product, a special aluminium main chassis for the Yokomo BD7 2015. Milled side sections lower the battery pack and electronics by 1mm for an overall lower centre of gravity which can reduce body roll on high-traction surfaces while making the car easier to drive at the same time. The amount of cutouts in the chassis also shifts the weight distribution towards the front for improved rear stability. Additionally the chassis helps with heat dissipation from the motor while being super rigid at the same time without sacrificing forward traction and corner speed. EX Lab will have more option parts available soon for touring cars such as Xray T4 2015 and the Awesomatix A700 Evo2. Currently EX Lab is working on their website which should be up soon.

Click here to view another photo

December 23, 2014

Xray XB4 gear centre differential set

Coming from Xray and made for the XB4 1/10th 4WD buggy is a gear centre differential set. Included are a composite gear case and cover, an exchangeable 81T spur gear as well as moulded diff internals. The specially designed spur gear is also available separately in a range of sizes to suit different gearing needs. Using a centre differential over a traditional slipper unit can be beneficial on both high-bite carpet and clay tracks alike.

Click here to view more photos

December 23, 2014

JConcepts universal storage bag

With the rapid industry changes there are always new radios, chargers, electrical and miscellaneous items that need comfy and neat storage and this is where the new JConcepts universal storage bag steps in. Designed with travel, cushion, ease of use and protection in mind the lightweight design consists of a rugged outer bag which has a convenient and easy access zipper closure and inside it has a Velcro closure pouch for additional easy access items. Inside, pull and pluck foam pieces are arranged throughout the entire inner liner allowing racers to chose the size and shape of the item needing protection or organisation while a lower stage foam insert cushions the bottom. The bag is travel friendly and sized to fit inside most luggage or racing carrier bags. JConcepts’ Striker logo and graphic imagery is printed on the outside to match with the remainder of JConcepts’ transportation bags.

Click here to view more photos

December 23, 2014

Zen-Racing GT12 inline bellcrank conversion

Zen-Racing’s inline bellcrank conversion is a simple kit to convert the Zen RSGT12 to inline LiPo configuration with bellcrank steering arrangement. The bellcrank offers much more control over the Ackermann change and can improve the ability to run more lock and gain further corner speed on tight hairpins. Having the LiPo in-line will improve the change of direction but not increase the overall steering feel, this is complemented by using the bellcrank steering option.

Source: Zen-Racing [zen-racing.co.uk]

December 23, 2014

Capricorn Lab C02/03 wide front bumper

New from Capricorn comes a wide front bumper for the Lab C02 and C03 200mm nitro touring car. Sporting an aerodynamic design the bumper is compatible with all current bodyshells and it is made to improve the overall response and precision of the car’s front end.

Click here to view another photo

December 22, 2014

CS-Electronic 2S 3100mAh Heavy Duty receiver battery

New from CS-Electronic and made for the use in large scale vehicles is the 7.4V 3100mAh Heavy Duty receiver battery pack. Measuring 88×34.5x26mm and weighing in at 150g the battery is ideal for a range of touring cars, buggies and trucks and it comes pre-wired with a BEC plug, XHR balancer port and two long power wires that allow to install your preferred power connector. The 2S LiPo configuration allows the direct use with high voltage compatible receivers and servos and the battery is available now.

Source: CS-Electronic [cs-shop.de]

December 22, 2014

DE Racing SpeedLine Plus 1/8th buggy wheels

DE Racing SpeedLine Plus 1/8th buggy wheels-1

DE Racing introduce the SpeedLine Plus 1/8th buggy wheels. They are designed to deliver maximum corner control and stability by utilising the “Sure Lock” foam retention system. This system, comprised of radial ribs that lock the wheel and foam insert together, retains maximum tyre traction to the racing surface while eliminating the vague inconsistencies that come from an insert that is free to move around on its wheel. The high-precision 83mm rims offer high durability, a smooth dish phase with bold logo, a glue channel for clean tyre install and they weigh in at only 38g.

Click here to view another photo

December 22, 2014

FVSS Velox V8 low-grip chassis & front body stabiliser

New from FVSS and Project RC comes a low-grip chassis plate for the Shepherd Velox V8 EC as well as a front body stabiliser set. Starting with the chassis, the part was designed in cooperation with Francesco Tironi to improve traction on low to medium bite tracks and for races that do not allow the use of tyre additives. Machined from Ergal 7075 material the chassis is a direct replacement for the stock part.

Click here to continue reading