December 27, 2018

Fantom Racing Octane Pro Drag Series LiPo packs

Fantom Racing have introduced their new Octane Pro Drag Series LiPo battery packs. The batteries feature modified chemistry that produces the ultimate combination of power, capacity, and low resistance and they were developed for the extreme demands of pro-level drag racing, where horsepower and low internal resistance is critical. Produced with premium Japanese materials the packs come with 8 gauge premium high-amp wire, they include a detailed instruction sheet and come in five different models and in 1S, 2S or 3S configuration.

View the other battery packs here


December 27, 2018

Roche 1S LiPo competition battery packs

Roche have introduced their new 2019 competition 1S LiPo battery packs for 1/12th scale applications. Available as 8100mAh 3.7V standard and 8000mAh 3.8V LiHV variant, both packs are built from highest quality 110C cells and they come in protective hardcases with 5mm bullet-type connectors. The packs are built to meet ROAR and BRCA rules and they will hot stores soon.

Source: Roche [rocherc.com]


December 21, 2018

Dynamite 12VDC nitro engine heater

Horizon Hobby have introduced the new Dynamite 12VDC nitro engine heater for .19 to .32 engines. The device will properly pre-heat the engine to 60°C to 70˚C in approximately ten minutes based on ambient temperatures. It helps to relieve the stress on the crank, connecting rod, piston and sleeve during warm-up. It will also help provide a smooth engine start, with reduced stress on the starter box. Fuel consumption will be reduced, as pilots do not have to spend time and fuel warming up and adjusting the engine. Additionally, a pre-heater glow-plug will increase the life of the plug. It is also perfect for break-in, as it reduces the pinch on a new engine.

Source: Horizon Hobby [horizonhobby.com]


December 21, 2018

Team Powers Radon Pro V4 brushless speed controller

Coming soon from Team Powers is the Radon Pro V4 brushless speed controller. The 200A-rated ESC features new hardware in the form of higher power FETs for a lower internal resistance and thus increased power supply and lower running temperatures. At 17mm the new aluminium case is 2mm lower than the previous version while also scrubbing about six percent of weight. A new PCB layout design improves stability and reliability and the included new firmware provides the ability to access pre-defined software features – such as limiter, throttle rate, RPM lock, brake limit and throttle settings – using a third or fourth radio channel. Furthermore the controller comes with a 6V/7.4V 5A high-performance BEC system to support power-hungry servos.

View list of the specifications and features here


December 21, 2018

GForce Hyper Sonic competition brushless motors

GForce from Japan have introduced their new Hyper Sonic 540-class competition brushless motors. The motor’s design provides increased torque, crisp acceleration and high top speeds while ensuring a smooth off-throttle feeling. A highly machined aluminium can allows for plenty of cooling and the motors come in 5.5T to 8.5T modified and 10.5T to 21.5T stock variants.

View another image here


December 21, 2018

1up Racing XT60 to 4mm bullet adapter

New from 1up Racing comes the XT60 to 4mm bullet adapter for DC power cables. The wire helps to easily connect the Pro Pit Iron to any 12-24V power source with 4mm outputs using the XT60 to 4mm adapter. The cable works with most popular power supplies and power stations.

View another image here


December 20, 2018

Trinity aluminium motor screw sets

Coming from Trinity are several aluminium motor screw sets for the 540-class Monster series modified and spec motors. Machined from 7075 high-strength alloy the screws promise a 250+ increase in RPM compared to the stock screws thanks to eliminating magnetic drag while also scrubbing three to four grams of weight. The 6-piece screws sets are available in pink and blue colour and also available is a 3-piece set of silver 48mm stator bolts and a 3-piece set of silver timing ring screws.

View the other screw sets here


December 18, 2018

HRC Racing 4700mAh LiPo battery pack

HRC Distribution have introduced the new HRC Racing 4700mAh LiPo battery pack. The hardcase battery is built using high-quality 40C cells, making it ideal for ready-to-run kits or cars, buggies and trucks with stock or mild modified motors. The pack comes pre-wired with an industry-standard balancer port and a T-type power connector.

Source: HRC Distribution [hrcdistribution.com]