Red RC » Products

October 18, 2016

Kyosho MP9e 1/8th E-Buggy kit – Detail images

Following yesterday’s introduction of the forthcoming Inferno MP9e TKI4 1/8th E-Buggy, Kyosho today released more detailed images of the company’s top-of-the-foodchain kit. The version 4 will include some subtle updates and changes previously available only with the nitro-powered TKI4 kit but now also EP racers can benefit of 2mm longer front A-arms, the updated +2mm roll centre front shock stay and upper arm mounts as well as an updated wing mount that allows to shift the wing up and down, forth and back. The kit is rounded out by an adjustable rear wing with additional wickerbill and it is set for a release this November.

View more images here

October 17, 2016

Associated B6 +1 steering block arms & hard side rails

Coming from Team Associated are new +1 steering block arms and hard side rails for the B6 and B6D buggy. Starting with the steering block arms, the parts add more Ackermann, resulting in different, smoother steering characteristics. The plates are a direct fit and they are marked for easy identification. Also new are hard side rails for both the B6 and the B6D. Made from a stiffer material for less flex the rails are recommended for high-speed tracks or tracks with large jumps as they absorb harsh landing better than the standard rails.

View more images here

October 17, 2016

JConcepts Dirt Maze 1/10th buggy rear tyre

jcdirtmJConcepts Dirt Maze 1/10th buggy rear tyreazetyre

JConcepts have introduced the Dirt Maze 1/10th buggy rear tyre. The big brother to the Webs, the Dirt Maze is designed specifically for the outdoor conditions where the track has been treated or left dry. The tyre has some depth and girth built into the design. Starting with thicker, connected webbing, the hot outdoor tire provides a continuous edgy contact patch needed for driving outdoors and at high-speed. The center X section delivers the comfort with the forward bite and the slightly slotted portions allow some flexibility for stability over terrain. Resting inside the hefty X patterns, horizontal and vertical pins help minimize wear and add some surface area for longer qualifiers and main events. Moving toward the outside of the tyre, the alternating bar concept, used on V2 Bar Codes work their magic to support the side-load during heavy cornering at the end of straight-aways and sweeping corners. Breaking up the alternating bars, an added horizontal bar blends deeply into the side-wall for balancing forward to side traction considerations. The tyre comes including Dirt Tech closed cell inserts and it is available in a range of compounds including the new long wear Y2, O2 and R2 rubber.

Source: JConcepts [jconcepts.net]

October 17, 2016

Kyosho Inferno MP9e TKI4 – Coming soon

Kyosho have released first information on the forthcoming Inferno MP9e TKI4 1/8th E-buggy kit. Based off of the MP9e TKI the version 4 kit features many parts already utilised by the TKI4 nitro buggy such as longer front A-arms, an H-S front shock tower and +2mm front upper arm mounts, as well as an updated rear wing stay and rear wing. Other parts include 1.5×5 shock pistons, aluminium steering knuckles, a reinforced servo saver and a 2-piece motor mount. The kit will become available by November.

Source: Kyosho [kyosho.com]

October 17, 2016

Hobbywing XeRun XR8 SCT brushless speed controller

Hobbywing have introduced their new XeRun XR8 SCT brushless speed controller for 1/10th scale short course and monster trucks as well as 1/8th scale buggies and on-road cars. At 54.1×37.2×36.1mm the controller is of a more compact design and about 36.5g lighter than the XR8 Plus for easier positioning even in crowded environments. The controller features a built-in high-voltage BEC system with adjustable 6V to 7.4V output to securely power even power hungry high-torque and high-speed servos and it is usable with up to 4S LiPo battery packs. A special firmware makes for ultra-smooth throttle response and off-throttle coasting and the ESC is widely programmable using Hobbywing’s LCD programming box or WiFi module. The speedo is rounded out by a rubber-protected electronic switch.

View the specifications here

October 17, 2016

T-Works RGT8 titanium, carbon & alloy option parts

T-Works have introduced a range of titanium, carbon and aluminium option parts for the HB Racing RGT8 on-road car. Available are a titanium turnbuckle set for a lower overall weight, carbon fibre A-arm inserts to reinforce the suspension arms, and also hard-coated aluminium or machined titanium lower suspension pins, again to further lower the unsprung masses for improved on-track performance. The range is rounded out by a titanium and a gold-plated steel screw set. All parts are direct replacements and they become available soon.

View the other new parts here

October 17, 2016

RC-Mission 43mm TRF419X rear aluminium dogbones

RC-Mission have released a first preview image of their forthcoming 43mm aluminium driveshaft dogbone for the TRF419X touring car. Machined from aircraft-grade 7075 aluminium and coming with a hard-coated surface the dogbones are meant to offer exceptional durability and they are a direct replacement for the stock parts. Coming soon are also suitable hard-coated 7075 rear axle shafts for the TRF419X for an ever lighter drivetrain.

Source: RC-Mission [rc-mission.com]

October 17, 2016

Yeah Racing TT02B black aluminium conversion kit

Yeah Racing have introduced the Tamiya TT02B aluminium essential conversion kit in black colour. The set includes all needed parts to equip the buggy with an all-aluminium suspension for improved performance, rigidity and cooler looks. Included are lower front and rear arms, C-hubs, steering knuckles, rear uprights as well as front and rear shock towers and also king pins, hinge pins and mounting hardware. All parts are finished off with black anodising, laser-etched markings and some also sport silver chamfered edges for looks.

Source: Yeah Racing [yeahracing.com]