Red RC » Products

September 2, 2016

Serpent Viper 977 Rear End Upgrade set

Serpent Viper 977 rear end upgrade set-1

Coming from Serpent and made for the Viper 977 1/8th on-road kit is the Rear End Upgrade set. Usable on the standard 977 and also the Evo, the included parts move the inner hinge pins closer to the centre line of the chassis which in combination with longer pivotballs makes for effectively longer suspension arms. The upgrade results in more overall traction, a more stable rear end both under acceleration and braking and thus overall higher corner speeds. The set includes new main bearings blocks, rear plate, suspension brackets and shock mounts as well as longer steel pivot balls, a new carbon fibre camber bracket and it is rounded out by longer camber rods, ball joints and pivot balls.

View more images here

September 2, 2016

T-Works B6-series hard-coated alloy pivot balls

Coming from T-Works are 7075-T6 aluminium pivot balls for Team Associated’s sixth generation buggies. Machined from aircraft-grade aluminium and coming hard-anodised for wear the 6mm pivot balls scrub a good amount of weight compared to their steel counter parts and they are usable on the lower shock ball cups and also the chassis’ waterfall-to-gearbox connection. The set includes five pivot balls, enough to equip all four shocks and the chassis brace.

View more images here

September 2, 2016

Elangears Elan R Pro multi-chemistry DC charger

Elangears have introduced their upgraded Elan R Pro multi-chemistry DC charger. Building on the previous model the 2016 version is constructed using parts sourced from a different supplier for improved quality and reliability and it features an upped charging power of now 250W, allowing for a charge rate of up to 20A and a discharge rate of up to 7A. The charger is now also LiHV-compatible to allow the charging of up to 6-cell Lithium-Polymer High-Voltage batteries. In terms of menu operation and software features the charger was left untouched. The upgrade Elan R Pro will become available soon.

View the specifications here

September 1, 2016

JConcepts Wash Brush tyre cleaning brush

JConcepts have introduced their innovative Wash Brush, a brush purpose built to make tyre washing easier. Tyre washing is a common sight in both nitro and electric off-road racing and it’s common to attach a brush to a re-sealable bucket for repeated pit use; however, it’s difficult to attach the brush. The JConcepts product eliminates the hassle by including the properly built RC brush with hardware and O-rings in each package. Moulded black in colour with JC logo for authenticity, the wash brush is a no-brainer item for the pits and around the track, home and pit area.

View more images here

September 1, 2016

Sanwa HVS-702 servo & RX-481WP receiver

German Sanwa distributors LRP have introduced the HVS-702 low-profile servo and RX-481WP receiver. Starting with the servo, the high-voltage compatible item offers up to 8.6kg-cm of torque at a speed of down to 0.07s, making it ideal for nitro and electric touring cars as well as 2WD and 4WD buggies. It features a metal geartrain, dual ball bearings and it is SHR mode compatible. Also new is the waterproof RX-481WP 2.4GHz 4-channel receiver. It features an internal antenna for improved durability and easier wiring, it is SSL and FH4/FH3 mode compatible and it weighs in at 10.7g. The receiver is compatible with transmitters including, but not limited to, the M12X, M12, M11X, MT-4S, MT-4 and MT-S.

View the receiver here

September 1, 2016

LRP FlowX speed controller – Exclusive preview

Following Ronald Volker’s World Championship victory in China, LRP revealed to Red RC that Ronald was using the all new FlowX speed controller in his Yokomo as well as giving us the opportunity to photograph the new speedo which is set for release later this year. A driver who has shown great loyalty to the German brand even during some tough product development periods, the new speedo is very much a joint effort between LRP and Volker. Working with electronics engineer Aleš Dobnikar, Volker made a point of thanking LRP for their “hard work” praising them on the “progress they have made” recently. Although they have won many World titles, LRP boss Jürgen Lautenbach, who was in Beijing, said “this one is special”. Technically the new FlowX is the evolution of the highly popular Flow WorksTeam speed controller with whom the prototype, ran by Ronald, shares its case but the full production version will sport an all-new case whose prototype you can see in our images. When it comes to the technical specifications and software features LRP remain very tight-lipped for now, just stating that the new ESC “pushes the boundaries of speed control technology in every aspect”. The new FlowX speedo is due for release later this year when the full technical details will also be made available.

View another image of the new FlowX here

September 1, 2016

RPM X-Maxx oversized rear axle carriers

Coming from RPM and made for the Traxxas X-Maxx monster truck are new oversized wheel axle carriers. They were designed to solve two key issues, the first being durability. RPM designed these carriers to handle some serious abuse with massive support ribs for the strongest possible carriers available. The other area of improvement comes in the form of larger inner bearings. The stock inner bearings are a mere 20x27x4mm while the oversized bearings are gigantic 20x32x7mm bearings. That equates to a dynamic load rating that is nearly 300 percent higher than the stock bearing while the static load rating is over 300 percent higher. The hub carriers come including the new inner bearings while the outer bearings are the stock Traxxas ones.

Source: Traxxas [traxxas.com]

September 1, 2016

Serpent SRX8 alloy wheel axle parts & brass hub weights

Made for Serpent’s SRX8 1/8th scale off-road buggy are two lightweight and one not-so-lightweight option part. Starting with the alloy parts, first up are lightweight 0mm and +1mm offset wheel hex adapters. They are machined from 7075-T6 material, come hard-anodised for wear and laser-etched for easy identification. The parts reduce unsprung weight and they include grey anodised serrated wheel nuts.

Continue reading here