Red RC » Products

July 22, 2016

JConcepts 1993 Ford F-250 trail bodyshell

JConcepts have introduced the 1993 Ford F-250 trail and scale bodyshell for 1/10th trucks such as the ones from Vaterra and Axial. The body is a replica of the ninth generation Ford truck and it features the slightly lower hoodline, rounded front fenders and grille as well as the stout fender flares the 1993 truck was known for. The bed itself is solid and includes slated details to look like its full-scale counterpart. Light body lines and raised sections are present throughout such as fuel tank latch, window weather strip outlines and hood indentations. The hard body-line positioned front to back give the truck heart and the “Built Ford Tough” personality. The body comes clear and includes an authentic decal sheet and easy to use window mask for the detailed hobbyist. The F-250 drops on the Ascender and Axial 12.5″ wheelbase setting, with standard body mounts.

View more images here

July 21, 2016

Axial SMT10 Grave Digger Monster Jam RTR truck

Axial have introduced their all new SMT10 Grave Digger Monster Jam 1/10th scale 4WD ready-to-run straight-axle truck. Resembling the iconic Grave Digger full-scale truck, the 1/10th kit was developed for maximum strength and an extremely detailed appearance. The chassis offers many pivot points for suspension tuning while realism and strength are achieved through triangulation of the chassis tubes, making it ready for maximum attack and hardcore Monster Truck bashing. Part of the package are also the AR60 OCP-Axles that are constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of these axles and a true 4-link suspension gives optimal performance for any terrain with the look of a real full-scale vehicle.

Continue reading here

July 21, 2016

Modify 40mm high RPM motor fan set

Coming from Japanese brand Modify is a 40mm high RPM motor fan set. Included are a high airflow 18,000 RPM fan unit for improved motor cooling as well as an all-black extension wire to couple the fan with a free receiver output. Using additional fans will lower the motor temperatures of both modified and stock motors and also in high ambient temperatures.

Source Modify [modifyrc.com]

July 21, 2016

Yeah Racing 90mm Desert Lizard crawler shocks

Yeah Racing have introduced the Desert Lizard 90mm dual stage internal spring shock absorbers for 1/10th scale crawlers. Utilising aluminium bodies the shocks also feature triple seal cartridges and dual stage internal springs that allow to build either a droop or sprung setup. The latter will create a rig which will generate a lot of flex and more suspension travel while with the droop setup, the rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. The shocks come in sets of two, including different springs and damper pistons and in a range of colours including red, orange, green, gun metal and black.

View more images here

July 21, 2016

RC-Cox adjustable GT rear wing mount

RC-Cox have introduced an adjustable aluminium rear wing mount for GT and other sports car bodyshells. The set includes CNC-machined aluminium wing stays that allow for three different wing angles. Alloy support plates keep the wing aligned even under heavy load and the set includes all needed mounting hardware but no rear wing.

Source: PPM [ppm-rcracing.com]

July 21, 2016

X Factory Infinity carbon idler gear shafts

Coming from X Factory’s Infinity range of option parts are carbon idler gear shafts. They solve the problem of early transmission failures in modern 2WD buggies that are the result of the idler gear wobbling on the gear shaft as the latter is a tad too small in diameter to allow for easier assembly. X Factory’s carbon idler gear shafts are exactly 5mm in diameter, making for a press fit of the bearing on the shaft, resulting in an ultra-precise gear location and longer gear life. The shaft is available in a TLR 22-series and a Team Associated B6/5-series variant as a single item and without the gear and bearings you can see above.

Source: X Factory [xfactoryrc.com]

July 21, 2016

Schelle B6-series carbon fibre battery strap

Schelle Racing Innovations have introduced their new carbon fibre battery strap for the Team Associated B6 and B6D buggies. The brace is of a rigid, secure, and minimalist design with the strap holds down the perimeter of the LiPo pack while allowing clearance for the plugs and also of the positive and negative terminal markings on the case. The pack is held in place by 3D-printed 7mm hex battery stops which are easy to install with a 7mm wheel wrench. Stainless steel screws are included, but racers can upgrade to aluminium or titanium to shave weight. Lastly the construction allows to pivot the hex posts and run the battery pack in-line for a more quick handling setup.

View the features and more images here

July 21, 2016

TLR TEN-SCTE 3.0 4WD short course truck kit

Following up on first teaser images we now have all details and images of TLR’s new TEN-SCE 3.0 1/10th scale 4WD short course truck available. The kit builds on the proven 2.0 and features an optimised suspension to make the truck easier to drive in all conditions. Included are Gen II shocks, known from the 22 platform, to reduce overall weight and lower the CG. Machined shock internals, X-rings, TiCN shock shafts and aluminium bleeder caps provide a smoother, more consistent shock. The truck lands better, jumps better, corners quicker and has a lighter, more nimble feel.

Continue reading here