Red RC » Products

July 12, 2016

Exotek D216 HD idler gear, Flite top gear & top shaft

Coming from Exotek and made for the HB Racing D216 are a HD idler gear, top gear and top shaft, all made of 7075 alloy. Starting with the idler gear, the part is machined from aircraft-grade aluminium and it improves durability when using high-power motors. The stronger material also prevents the gear from deforming, resulting in improved diff gear life compared to running the stock nylon part. Furthermore the gear is machined for lightness and it comes with smaller 5x10mm bearings for reduced mass.

Continue reading here

July 12, 2016

Arrowmax 7800mAh 2S LiHV battery pack

Arrowmax have introduced their new 7800mAh 2S LiHV standard-size battery pack. Build using high-performance 55C cells the high-voltage 7.6V LiPo pack comes in a protective hardcase with through-type 5mm tube connectors, 2mm balancer port and it sports split stickers to make sure the decals are not pulled off when removing any mounting tape. The battery is good for LiHV charging of up to 4.35V per cell but it is also usable with standard LiPo charging programs.

Source: Arrowmax [arrowmax-rc.com]

July 12, 2016

Reedy Circuit T-shirt

Coming from Reedy is the all-new Circuit design T-shirt. The shirt, made from black fabric, comes printed with a cool new Reedy circuit board design on the front and the Reedy logo on the back and it is available in adult small to 3X-large sizes.

Source: Team Associated [teamassociated.com]

July 12, 2016

Tekno introduce new differential outdrives

Tekno have introduced new lightweight differential outdrives for their line of 1/8th scale vehicles. The outdrives, usable at the front and rear of the cars, feature a revised design and they are made using a different steel alloy material and new heat treatment process to extend life and improve consistency. The parts come in packs of two and they are compatible with all EB/NB48 and ET/NT48 vehicles.

Source: Tekno [teknorc.com]

July 11, 2016

Reflex Racing RX4-16 chassis & T4 shock towers

Coming from Reflex Racing and made for the Xray T4 touring car are the RX4-16 quasi carbon fibre chassis and 4mm carbon fibre shock towers. Starting with the chassis plate, the RSD RX4-16 was developed for the Xray T4 and it is made from RSD’s own quasi isotropic 2.0mm carbon fibre for more rigidity, translating into increased response, grip and a lower centre of gravity over the stock unit. The shape profiles for the chassis have been developed over the past year with a focus to provide a more consistent car feel and less tyre overheating over a run. The design moves the flex to the bulkhead areas which results in a car that rotates faster and harder all while maintaining a higher level of grip. Additionally the chassis has been made completely symmetrical so that the left to right flex of the car can be equalised as much as possible.

content

July 11, 2016

BRP TRF102 black 1.5mm V2 FRP T-bar

The Border have introduced the new 1.5mm V2 FRP T-bar for the Tamiya TRF102 formula pan car. Designed especially for indoor carpet tracks the part offers a good balance between flexibility and stiffness, making it ideal for mid to high-grip conditions. Stronger than the original Tamiya T-bar and being a direct replacement the part, made from 1.5mm high-quality FRP, simply drops into place.

Source: The Border [the-border.com]

July 11, 2016

Tesla 540-size brushless electric motors

Tesla 540-size brushless electric motor

Capricorn have introduced their new 540-size brushless motors for 1/10th and 1/12th scale applications. Coming with a lightweight can that sports cooling ribs and large vent openings, the hand-built motors feature a balanced rotor and ceramic ball bearings for maximum efficiency and performance. The motor is available as 3.5T to 8.5T modified, 4.0T and 13.5T modified as well as 13.5T, 17.5T and 21.5T stock variant. As for the two 13.5T offerings, the modified motor is making use of a 12.3x5mm rotor while the stock variant comes with a 12.5×7.2mm rotor.

View more images here

July 11, 2016

ZZRacing B6 series titanium screw sets

ZZRacing have introduced two titanium screw sets for the Team Associated B6 and B6D. Made from 304 titanium, the screws offer high durability, corrosion resistance and also a light weight with the B6-specific set weighing in at 30.1g while the B6D kit is slightly lighter at 28.6g. In addition to being light and robust the fasteners also add a certain bling to the car due to their silver finish.

Source: ZZRacing [zzracing.net]