Red RC » Products

July 1, 2016

Arrowmax 5200mAh 2S LiHV battery pack

Arrowmax have expanded their range of high-voltage LiHV battery packs, with the introduction of a 5200mAh variant. Built from high-performance 55C LiPo cells the pack offers an increased nominal voltage of 7.6V compared to the standard 7.4V and it can be charged to up to 8.7V or 4.35V per cell. The “outlaw” battery provides improved punch and runtime and it can also be handled like a standard LiPo pack and charged to the lower 8.4V while maintaining a flatter discharge curve and better punch characteristics towards the end of a run compared to a standard LiPo battery. The hardcase pack features split decals for clean fastening using tape and it utilises 5mm connector tubes.

Source: Arrowmax [arrowmax-rc.com]

July 1, 2016

T-Works 1/8th buggy droop & rebound gauge

Coming from T-Works is a droop and rebound gauge especially designed for 1/8th off-road buggies. Made from black and red anodised aluminium the gauge is of a common design and it will be fastened to the upper shock mounts during setup, allowing to estimate the droop and rebound rates when using the lower shock mount bolt as an index for the overall shock extension. The tool sports laser-etched scales with a range of 90mm up to 135mm on both sides and it works with most of today’s 1/8th buggies.

View another image here

July 1, 2016

Team Associated B6/B6D titanium screw kit

Team Associated have announced the release of a titanium screw kit for the B6 and B6D buggies. Including 90 screws in total, the lightweight fasteners make for significant weight savings compared to the standard steel screws while also improving visual impact thanks to their shiny appearance. The screw kit is usable for both cars and available now.

Source: Team Associated [teamassociated.com]

June 30, 2016

Samix SCX10 forward battery tray kit

Samix have introduced the forward battery tray kit for the Axial SCX10 vehicle. Machined from aluminium and coming with adjustable battery locators on both the left and the right hand side the tray makes for a more forward biased weight distribution, greatly improving climb performance. The part is designed to attach to the front shock plates, which also leads to a reinforced front shock mounting. Coming in five different colours the tray accept up to 170mm long battery packs.

View more images here

June 30, 2016

Kyosho Optima 2016 option parts

Kyosho have introduced a range of option parts for the Optima 2016 re-release buggy. First up is an aluminium servo mount that makes for improved stiffness and cooler looks. The part comes gun metal anodised and it includes mounting hardware. Also new are hard-anodised 7075 alloy main chassis rails for improved looks and durability. On the performance side of things, Kyosho have soft compound pin tyres to offer. Measuring 43x86x40mm the tyres fit the Optima’s kit rims and the softer rubber compound improves traction and side bite. Finally comes a 2-piece set of 5-spoke rims for the Optima re-release buggy. Matching the kit’s design the rims come in black colour to make for a different visual appearance.

View the other new parts here

June 30, 2016

Active Hobby Products 21mm touring car springs

Coming from Japanese company Active Hobby Products is a range of 21mm big bore touring car springs. They are available as medium soft 2.4, medium 2.5 and medium hard 2.6 variant made from 1.4mm wire. The colour-coded springs promise improved steering response and rear traction while also reducing tyre degrading and they come in sets of two or four pieces per hardness and also as 6-piece combo package, containing a pair of each spring.

View more images here

June 30, 2016

Core RC under shorty LiPo brass weight

Schumacher have introduced the new Core RC under short LiPo brass weight. Measuring 92 x 47mm and with 1mm thickness the weight can be positioned directly under a 1S or 2S shorty battery for the lowest centre of gravity. The weight weighs in at 35g and it comes with the Core RC logo etched on.

Source: Schumacher [racing-cars.com]

June 30, 2016

Exotek DEX210v3 MM chassis kit & alloy wing mounts

Coming from Exotek are a new 7075 alloy chassis conversion for the Team Durango DEX210v3 in MM configuration and also aluminium wing mounts for the same buggy. Starting with the chassis conversion, the kit was designed and tested with the feedback of factory drivers, bringing the trusted DEX210 buggy to the forefront of mid motor clay track performance as the MM chassis allows lateral shorty battery positioning for optimal performance on indoor clay tracks. The 2.5mm 7075 alloy bottom plate offers optimised stiffness and strength and it comes with machined bolt-on side rails made from black delrin. The much narrower profile improves ground clearance and the easy LiPo access makes working on the car a breeze while the upper plate also allows for forward or rearward battery mounting. Also included with the chassis kit, that makes for a 2mm shorter wheelbase compared to the v3’s, comes a 7075 alloy nose plate. The narrower chassis, that also fits the v1 and v2 variants of the DEX210, accommodates all TLR 22 3.0 bodies such as the ones from Pro-Line and JConcepts.

Continue reading here