February 15, 2016

JConcepts LiL Chasers 1/8th buggy tyre

JConcepts LiL Chasers 1/8th buggy tyre

JConcepts have introduced the LiL Chasers 1/8th buggy tyre. Relying on a tread scaled down from the original Chasers, the small, rectangular lugs are angular in multiple directions, giving the tyre the ultimate bite for outdoor racing. It also has a lower, closer lug arrangement which gives exceptional responsiveness and bite in medium, high and low grip conditions. The wet and dry condition tyre has small recessed cuts in the top of the tread for extra edges and increased formability over terrain while the centre’s overlapping bar treatment increases durability in the highest wear region. The tyre is available in blue, green and black compound including Dirt-Tech inserts and also as pre-mounted green compound tyre.

Source: JConcepts [jconcepts.net]


February 15, 2016

Team Associated RC8T3e Team Kit 1/8th E-Truggy

Team Associated RC8T3e Team Kit 1/8th E-Truggy

Following the recent introduction of the RC8T3 1/8th nitro truggy, Team Associated now also released information on the electric-powered RC8T3e Team Kit. The E-truggy was developed based on the RC8T3 nitro truggy and uses a unique proprietary hard-anodised 7075-T6 aluminium chassis specifically designed for brushless power with optimum weight distribution and superior handling. The RC8T3e shares over 90 percent parts compatibility with the RC8T3 truck, offering the perfect solution for multi-class racers. The electric kit was designed to handle and respond to changes like the nitro-powered vehicle with this similar handling characteristic giving the racer a huge advantage, as tuning changes can be applied seamlessly. The kit is set for a release in April.

View the features and more images here


February 15, 2016

Xray XB2 aluminium front arm mounts

Xray XB2 aluminium front arm mounts

Xray have introduced optional front arm mounts for the XB2 line of 2WD buggies. Machined from high-quality 7075-T6 aluminium and coming black anodised the bulkheads are available in a 23/29 degree and a 26 degree variant to fine-tune the steering characteristics of the vehicle. The 23/29 degree part must be used with the optional aluminium front arm brace. Using the alloy parts in place of the standard composite bulkheads will lead to a more stable car with increased on-power steering.

View more images here


February 15, 2016

Samix SCX10 footboards & side rail mounts

Samix SCX10 footboards & side rail mounts

New from Samix and made for Axial’s SCX10 off-road vehicle are aluminium footboards and side rail mounts. Starting with the footboards, the parts are machined from high-quality aluminium and sport non-slip insert details for a realistic appearance. The boards come in pairs and they are available in black, green, silver and gun metal anodising. Also new are aluminium side rail mounts, designed to replace the standard parts. They improve durability and make for a more sturdy mount of the composite side rails. The parts are available in black, green, silver and gun metal colour and they incorporate mounting positions for the alloy footboards.

View more images here


February 14, 2016

Arrowmax 7000mAh 2S LiPo battery pack

Arrowmax 7000mAh 2S LiPo battery pack

Arrowmax have a new high-performance LiPo battery pack available. It utilises high capacity 7000mAh 55C/110C cells for ultra-long runtimes and a high power output. The hardcase is equipped with 4mm through-type tube connectors and split stickers allow the use of reinforced tape to secure the battery in the chassis without having to worry about peeling the sticker off with the tape.

Source: Arrowmax [arrowmax-rc.com]


February 14, 2016

Speedzone Elite Series brushless motors

Speedzone Elite Series brushless motors

Speedzone have introduced their new Elite Series brushless motor to compliment the Peerless Series. With a more linear feel, this latest offering allows a user to have every available motor option to suit track conditions and racing environments. A variety of turns are available and each motor is built to the highest quality and tolerance. Motors are bench tested to ensure sensor, stator and the ball bearings are all functioning to a strict quality control. Symmetrical vent openings in conjunction with the case and stator structure reduces motor temperature and maximises efficiency during an operating cycle. It also allows for easy stator measurement without disassembly. The Spec motors are produced with a short stator and HT rotor while the Modified motors come with a standard size stator.

View the features and more images here


February 14, 2016

STRC 17mm aluminium wheel nut wrench

STRC 17mm aluminium wheel nut wrench

Coming from ST Racing Concepts is a 17mm aluminium wheel nut wrench. The wheel nut wrench is machined from high-quality aluminium in a two-piece construction. The lightweight slotted shank component of the wrench keys into the drilled light weight wrench handle and it is secured in place by four steel screws. The wrench is also long enough to provide good clearance for the hand when used on wheels with deeper off-sets. The tool is available in two-tone anodising of a black handle combined with blue, gun metal, red, or silver bodies.

View more images here


February 12, 2016

JConcepts Triple Dees 1/8th buggy tyres

JConcepts Triple Dees 1/8th buggy tyres

Coming from JConcepts are the Triple Dees 1/8th buggy tyres. The tyres sport a tread design that was developed for loose and tacky track conditions. Starting with finely spaced square mini lugs the tyre also features an overlapping and blended centre bar structure. The bar draws up the side of the pin to maintain all important support but the main stance is low so the tyre maintains its clean-out ability during acceleration. The main-stay of the tyre is the angled and sharp pins which spread across the carcass in an open pattern touching off the track surface. Near the side-wall the pins have been trimmed and angled to give racers a smooth driving experience as they enter and exit tacky turns or slightly rough terrain. The inside of the carcass includes a standardised triple radial rib design which helps control expansion during high-speed runs. The Triple Dees is available in grippy compounds such has blue, green and black and it comes including Dirt-Tech inserts and also as pre-mounts on white or yellow wheels.

Source: JConcepts [jconcepts.net]