Red RC » Products

July 11, 2015

MIP AE & TLR .250 bore machined T-nut

MIP .250 bore machined T-nut

Made for 5th and 4th generation Team Associated 1/10th vehicles as well as AE and TLR MIP ball differentials is a machined T-nut from MIP. The 7075-T6 machined aluminium T-nut is completely rebuildable by simply replacing the small nylon inserts. These high quality nylon inserts increase the screws break away force by 20 percent, meaning that the diff screw will stay in its desired position much longer and increase the consistency of the differential over time. The aluminium design also increases sheer strength of the “T” by 40 percent. Included in the set are the aluminium T-nut and two nylon inserts.

Source: MIP [miponline.com]

July 10, 2015

Samix SCX10 4-link servo plate

Samix have a 4-link servo plate for the Axial SCX10 truck available. Coming machined from aluminium and available in the four colours of black, green, silver and gun metal the plate offers increased adjustability and improved looks with chamfered edges and a laser-etched Samix logo.

Click here to view the different colour variants

July 10, 2015

Team Orion dDrive 2-in-1 brushless power unit

Team Orion have introduced their all-new dDrive 2-in-1 brushless power unit for 1/10th scale on-road and off-road vehicles. The revolutionary system combines a highly efficient and very powerful 4-pole brushless motor and a brushless controller in one simple to use package. Coming from the mind of Oscar Jansen the unit is used in place for the usual motor and is very easy to setup while the integrated system uses only a minimal amount of wires for improved reliability and less hassle especially for beginners. The integrated controller offers three different drive modes, user-adjustable performance settings, overheat protection and low-voltage cut-off while the 4-pole motor is housed in an aluminium heatsink can. The 58mm long unit is splash-proof, it comes pre-wired with a T-type connector and it is available as 2700kv and 3000kv variant.

Click here to view the features, video and more photos

July 10, 2015

Reds Racing TX120 1/10th brushless speed controller

During this week’s EFRA 1/8th Gas Offroad European Championship Italian company Reds Racing have their forthcoming TX120 1/10th scale brushless speed controller on show. Known for their successful range of nitro engines Reds Racing recently also stepped into electric propulsion with the release of their 1/8th and 1/10th scale brushless motors. As for the speed controller, the TX120 was developed with a focus especially on 13.5T stock racing and a good brake feel, but the speedo will also work with modified motors down to 3.0T. Measuring 31.38x19mm and weighing in at 45g the 2S LiPo-compatible and 120A-rated ESC offers 6V/3A BEC output and it sports all-black wires for a pro-level look. Also available will be a dedicated programming box that allows to adjust the software parameters that, from what is understood, will include class-standard items such as timing and turbo functions beside others. More detailed information about both products will become available in time for the release.

Click here to view the programming box

July 10, 2015

Tamiya TT-02B MS buggy kit

Coming soon from Tamiya is the TT-02B MS 1/10th scale 4WD kit. Based off of the entry level TT-02 chassis the buggy also received the MS treatment with FRP shock towers, aluminium centre driveshaft, front and rear metal cup joints, rear aluminium hubs and white CVA shock absorbers. Other features include adjustable camber and steering links, fluorescent orange rims and a special bodyshell and rear wing.

Click here to view more photos

July 10, 2015

Teamsaxo Pro5 carbon fibre main chassis & upper deck

Coming from Teamsaxo and made for the HB Pro5 touring car is a new carbon fibre main chassis and top deck. The 85mm wide chassis is cut from 2.2mm material and it features a symmetrical design with the milled motor pocket also being present on the battery side for a more equal left-to-right flex. The design makes the chassis especially helpful in low-grip conditions with the 2.0mm top plate being usable in combination with the optional or standard chassis in order to provide different flex characteristics when needed.

Click here to view the top deck

July 10, 2015

Mon-Tech X1 SSS floating servo & steering system

Italian company Mon-Tech have introduced a special servo and steering mount for the Xray X1. The option part, called SSS which is for “servo, steering, suspension” is meant to allow better steering response, faster cornering and improved bump handling. Made from aluminium the brace takes both the steering servo and the steering bellcrank to connect them with the front part of the chassis using the upper camber and castor plate rather then attaching them to the main chassis plate, to create a “floating” design. The anodised aluminium brace comes including three alloy posts and the assembly is a direct fit on the X1.

Click here to view another photo

July 9, 2015

Avid AE 5-series black shock kit

Avid’s new black shock kit for the Team Associated 5-series off-road vehicles includes everything needed to convert four shock absorber to all-black aluminium parts. The kit includes four threaded shock collars that feature offset laser etched Avid logos for ease of matching spring tension left and right in 1/4 turn increments as well as four shock bottom caps that are knurled with a silver highlight edging. The collars have a standard internal O-ring design for holding the collar in position and the set fits all shocks that use the VCS3 design which currently includes the B5, B5M, T5M, and SC5M.

Click here to view another photo