Red RC » Products

October 15, 2014

Highest RC F1 pan car servo

Highest RC introduce a servo specially designed for the use in formula chassis kits. The low-profile servo features an aluminium case with plastic lower bottom part and it comes without the standard mounting lashes as these are normally cut away in many formula chassis to allow for an upright mounting position. The high-voltage compatible servo is usable from 4.8V input on and offers up to 0.06s of transit time with a torque as high as 8.3kg-cm. A coreless motor makes for efficient operation and the servo is compatible with Sanwa’s SSR mode.

Click here to view a photo of the installed servo

October 15, 2014

WRC lightweight F1 bodyshell

WRC now offer a lightweight bodyshell for the F-One formula kit. Made from clear high quality material the body offers the same design as the current F-One shell but it is 20 percent lighter to save some valuable weight.

Source: WRC [wrc-racing.com]

October 15, 2014

Capricorn V3 standard & big bore shock absorbers

Italian company Capricorn introduce the new V3 shock absorbers for their EP and GP kits. The shocks feature a redesigned lower cartridge that allows to use dual O-rings for better sealing or a single O-ring for a smoother operation with less friction. A new piston rod design holds the pistons in place using a screw for easier setup changes and a fixed piston that does not rotate within the shock housing. The 1/10th shocks are available as 52mm, 55mm and 57.5mm long variant while the 1/8th related shocks come in 57.5mm an 60.5mm length. Also new are 50 shore and 60 shore volume compensator membranes for further fine-tuning.

Click here to view more photos

October 15, 2014

Team Orion VST2 Sport brushless motor

Team Orion introduce the new VST2 Sport brushless motor. Developed by Oscar Jansen the sport version of the World Championship winning VST2 Pro is of a fixed timing design, making it ideal for spec racing classes. The motor builds on a machined aluminium can, it is of a simple and reliable deign and large venting holes make for efficient cooling and low running temperatures even in high ambient temperatures. The VST2 Sport is available in 6.5T to 8.5T modified and 10.5T to 21.5T stock windings.

Click here to view the features and more photos

October 14, 2014

JConcepts CT4.2 4mm carbon fibre rear shock tower

Made for the Centro CT4.2 conversion kit is the JConcepts 4mm carbon fibre rear shock tower that has all the necessary adjustments including the standard outer (CT4.2) camber link positions and the newly added inboard camber link holes to accommodate a narrow pivot rear suspension. The shock tower has the JConcepts touch, including a strong design and genuine carbon fibre material. The strength is added where appropriate and to allow big bore shock and transmission clearance where necessary. The tower requires the use of the JConcepts #2320 rear bulkhead.

Click here to view another photo

October 14, 2014

Reds Racing HCX horizontal carburettor

Seen for the first time during the recent IFMAR 1/8th Gas Buggy Worlds, Reds Racing now officially introduce the HCX horizontal carburettor. Featuring a differently positioned top end needle than found on conventional carbs, the main needle on the HCX is placed horizontally for easier access, improved idle stability, a more precise tuning and higher mod and top end power. The new carburettor is usable with all Reds Racing off-road engines such as the R5R, R5T Team Edition and R7 Evoke.

Click here to view more photos

October 14, 2014

MIP 5ive-T header lock wire kit

MIP introduce the Losi 5ive-T header lock wire set for Losi’s large scale truck. Including a pair of pipe screws, split lock washers, M5 safety wire nuts and 2 feet of spring wire the set helps to secure the header screws and nuts of most gasoline engines to prevent them from vibrating loose during operation. The lock wire routes through the nuts, limiting their movement once they accidentally come loose due to heat and vibrations, and although they may still move a little bit they still hold the pipe in place making sure you can complete the run without sacrificing engine performance.

Source: MIP [miponline.com]

October 14, 2014

ZZRacing Schumacher & Hot Bodies screw kits

ZZRacing have new stainless steel and titanium screw sets available for a range of Schumacher and Hot Bodies kits. Beside weight saving titanium and cooler looking silver stainless steel screws the sets also include purple colour aluminium washers and aluminium nyloc nuts and they are currently available for the Schumacher Mi5, Mi5 Evo, Cat K1, Cougar KR/KF/SV2 as well as the SupaStox kit. As for the Hot Bodies range, specific sets for the TC-FD and TCXX are available.

Source: ZZRacing [zzracing.net]