Red RC » Products

July 31, 2014

Updated Hobbywing Xerun 120A V3.1 firmware

After more than half a year of development and testing, Hobbywing announce the latest firmware release for their flagship Xerun V3.1 car series controller. The new “V3.2_140627_Beta” firmware offers improved bottom end feel with lower motor temperatures. Development has also focused on improving the brake operation when running super fast boosted programs. Brake linearity is retained whilst still providing exceptional brake power. World Champion team drivers Atsushi Hara and Andy Moore have both helped developing the new firmware, and highlight the improved feel throughout the throttle and brake profiles. The latest firmware version is available for download here.

Source: Hobbywing [hobbywing.com]

July 31, 2014

STRC Kyosho 1/10th off-road weight reduction kits

Following the weight reduction kits for Team Associated B5 and TLR 22 vehicles, ST Racing Concepts now also have nuts & bolts kits for several Kyosho 1/10th scale off-road buggies and trucks available. The kits include titanium screws that are coming in at about half the weight of their steel counter parts while the supplied aluminium lock-nuts are less than half the weight of the steel ones, virtually cutting the weight of the vehicle’s hardware in half. The hardware kits are available for the RB6, RT6, SC6, SC-R and ZX-6 with the 2WD packs including screws for both mod and rear motor configuration.

Source: STRC [teamstrc.com]

July 30, 2014

JConcepts Dirt Webs red compound

JConcepts popular Dirt Webs tyre is now also available in the “soft outdoor” red compound that debuted at the 2014 Cactus Classic. The new compound works alongside the blue, however, it is much more friendly in warm/hot conditions as seen at outdoor events, providing more stability and better reaction for quicker laps. The red is not a replacement for any compound but used as an alternative in warm and hot weather conditions and abrasive tracks it is available for the 2WD front, 4WD front and 2WD/4WD rear Dirt Webs.

Click here to view more photos

July 30, 2014

KM H-K1 Evo3 fuel tank

KM have a new option part for the H-K1 Evo3 200mm nitro on-road car available in the form of this fuel tank. It offers a stronger spring for the cap, a new internal fuel filter and a reinforced tank body and cap mount. Also new is a cap pivot pin that now sports an E-clip support. The tank is a direct replacement for the stock part.

Source: KM [km-rc.com]

July 30, 2014

Yokomo BD7 ETS Champion limited edition kit

Yokomo Europe introduce the limited edition BD7-2014 ETS Champion kit. Based on the standard Black Edition BD7-2014, the kit is issued to celebrate the 4th back-to-back Euro Touring Series title and it comes with a load of option parts such as C-clip front double joint driveshafts, rear aluminium 44mm dog bones, a graphite front body mount support, a special black colour aluminium servo mount, a titanium-coated main gear shaft, a super-precision bearing set, aluminium belt tension adjustment cams and hard-coated self-lubricating shock ball ends. The kit, that is limited to 25 pieces, is rounded out by a titanium turnbuckle set, a luxury packaging and a transportation bag, both of which are marked with a serial number. The kit will become available from beginning of August. Please note that above image shows the standard edition car.

Source: Yokomo Europe [teamyokomo.eu]

July 30, 2014

Team C infrared temperature gun

Team C now have an infrared temperature gun available. The device offers a large LC display and a specially shaped sensor head that helps to insert the gun into the engine’s cooling head for precise temperature measurement in the glow plug area. While being of good use for nitro racers, the gun also comes in handy to control the temperature of electric motors and speed controllers as well as tyres and electric equipment. The gun comes with a handy Team C branded transportation bag.

Source: Team C [teamcracing.net]

July 30, 2014

RB Energy 100C hardcase LiPo battery packs

RB have two new Energy range high-performance hardcase LiPo battery packs available in the form of a 2S and a 4S pack. Both are made from 6400mAh cells with 100C discharge rating and they come in plain black cased with chrome RB stickers. The 2S pack measures 138x46x25mm and is equipped with 4mm connector tubes while the 4S pack measures 137x46x49mm. The latter is ideal for 1/8th applications and comes pre-wires with a balancer connector and a high-currrent Deans-type T-plug.

Click here to view the 14.8V battery

July 29, 2014

Tekno CNC delrin shock cartridge set

Tekno introduce a CNC-machined shock cartridge set for the dampers of their 1/8th and 1/10th vehicles such as the EB48 and NB48 buggy and the SCT410 short course truck. They are a direct replacement for the stock guides on all Tekno RC vehicles and will reduce drag on the shock shaft and improve suspension efficiency in all conditions, resulting in improved handling. They are also more durable than the stock parts and one package will cover a full set of four shocks.

Source: Tekno [teknorc.com]