Red RC » Products

October 25, 2012

Serpent Cobra 811 Team Edition truggy

Serpent introduce the Cobra S811 Team Edition 1/8th nitro truggy kit. The truck includes many of the latest V2 and V3 option parts such as the front V2 steering block and rear V2 upright and wheel axle set, the V3 front and rear gear coupler set as well as the V3 centre front driveshaft. The steering block and uprights are equipped with larger 8x16x5 and 15x21x4 bearing and come with new spring steel wheel axles. The V3 diff coupler and pinion system with two larger rubber-sealed bearings improves reliability while the new front and rear coupler and front driveshaft are included to complete the conversion. The kit is ready for shipment and should be available in stores from beginning of November.

Click here to view more photos

October 25, 2012

Zeppin Racing high flow cooling fan

Zeppin Racing introduce the Crazy High Speed motor cooling fan. Featuring dimensions of 40x40x10mm and a high air flow capacity the fan is ideal to cool down highly stressed stock and modified motors while being low on power consumption at the same time.

Source: Zeppin Racing [zeppinracing.com]

October 25, 2012

TOP Rebel R-F01 optional hinge pin

TOP introduce an optional hinge pin for the Rebel R-F01 formula chassis. The improved version of the original upper arm pin sees E-clips used to further secure the pin from sliding out of the front suspension assembly. Included in the set are two pins and two E-clips.

Click here to view the installed parts

October 25, 2012

CRC Xti option parts & accessories

Calandra Racing Concepts introduce new option parts and accessories for the Xti 1/12th pan car. First up is a Xti conversion kit to bring the older Gen-X, XL and Xi to the latest spec. The kit contains a new main chassis, motor pod, upper plate and tons of hardware to not only upgrade an existing chassis but also to refresh parts such as screws and springs.

Click here to continue reading

October 25, 2012

Reedy 6800mAh 65C competition battery

Reedy’s 6800mAh 65C competition battery is the follow-up to the IFMAR 1:12 World Championship-winning 6500mAh 65C battery. With higher capacity and voltage as well as lower internal resistance, this battery raises the bar in the 1:12 classes where power and duration are critical. An attractive Reedy hard case and low resistance 4mm sockets round out the high-performance package.

Source: Reedy [teamassociated.com]

October 24, 2012

Smokem Racing 417MX chassis

Following on from their successful T3MX chassis, Smokem Racing has now released the new 417MX chassis for the TRF417 series of electric touring cars. The 417MX is a medium flex 2.25mm thick chassis that is ideal for medium to high traction conditions. It has a wide tuning window which allows you to dial in your car over a range of temperature and track conditions. The 417MX utilizes the same distinctive carbon weave first found on the 417FX chassis and also features distinctive curved profile cutouts which improves chassis response during quick direction changes and turn-in, while maintaining maximum rear traction. With an overall width of only 88mm, scrubbing during hard cornering is minimized.

View another image of the chassis here

October 24, 2012

JConcepts green compound Bar Codes

JConcepts have announced that their 4wd front and racing truck front & rear Bar Codes are now available in green compound. Like the name suggests the alternating bar design combined with the addition of the Y side bars provide uncompromising support for blue and black groove conditions. Bar Codes in new condition excel on hard surfaces that have taken rubber with either dry or wet grooved conditions. Worn Bar Codes excel on indoor or outdoor clay tracks where a minimal dust groove has formed.

View the 4wd FR Bar Codes here

October 24, 2012

Answer-RC engine bearings

Answer-RC have introduced new engine bearings developed to suit the newer generation of Novarossi and RB Engines including the BX and BXR. They have a 14.5mm inner race and 26mm Outer Race and are available with either steel or Si3N4 Ceramic balls.

Source: Answer-RC [answer-rc.com]