Red RC » Products

July 10, 2012

Xray NT1 pre-assembled brake pad set

For the NT1, Xray have released this factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency. The brake pad backing plates are heat-treated for maximum lifespan. Special high-grip brake pad material is specially bonded to backing plates for high resistance to generated heat build-up. Sold as a set of 2.

Source: Xray [teamxray.com]

July 10, 2012

Arrowmax 64 pitch pinions

Arrowmax have released a full set of premium-quality pinions in 64 pitch. Made from the highest quality 7075-T6 aluminium and hard coated they are both tough and lightweight. Available in a full range from 17T – 52T.

Source: Arrowmax [arrowmax-rc.com]

July 10, 2012

T.O.P. Photon EX options

Some new parts for the Photon EX from T.O.P. with the release of this optional alloy camber link plate with 1.75mm offset. This new part allows the driver to fine-tune the camber link position and thus camber gain characteristics. Also new is a 7075-T6 aluminium tie rod set, this strong lightweight option would is a must for those weight cautious drivers. The set consists of six 30mm tie rods and a 15mm tie rod.

View the tie rod set here

July 9, 2012

Associated RC8.2e RS RTR buggy

The RC8.2e has already been proven as a winner after TQ’ing and winning the 2011 Sidewinder Nitro Explosion in the capable hands of Ryan Cavalieri. With the RC8.2e RS RTR you can now have this high level of performance in a Race-Spec Ready-To-Run. It comes loaded with the performance features you’ve come to expect from the Race-Spec line like the powerful Reedy 2000kv brushless motor, waterproof XP SC1300-BL brushless electronic speed control and XP 2.4GHz radio system, just to name a few. The RC8.2e RS RTR is the perfect way to get into the 1:8 scale Buggy class, and also has the benefit of having many Factory Team parts available for you to take your 1:8 scale dreams as far as you want.

View more details here

July 9, 2012

S-Workz S-ePower Li-Ion receiver pack

S-Workz have released this S-ePower Li-Ion 7.4v receiver pack made in Japan by Sanyo. The Li-Ion is one of the best types of Lithium batteries and is super stable and can take a large amount of charging cycles. At just 68 grams it is a perfect way to reduce weight in your S350 BK1 or other 1/8th scale buggy.

Source: S-Workz [sworkz.com]

July 6, 2012

Team Durango DEST210R stadium truck

Announced some time ago and available very soon is Team Durango’s DEST210R 2WD stadium truck. The truck that is based on the DEX210 buggy and features a newly designed longer moulded composite chassis, and the patent pending gear box that allows to run several configurations such as 3-gear and 4-gear layout in one gear box. Also included in the kit are highly adjustable suspension components that make use of interchangeable inserts to adjust caster and rear toe settings, big bore shock absorbers, captive pin CVD rear driveshafts, new 15mm front and rear disc rims as well as a unique stadium truck body shell.

Click here to view more photos

July 6, 2012

KM H-K1 EvoII two speed steel shaft

KM Racing introduce this two speed steel shaft for the H-K1 EvoII 1/10th on-road chassis. Being of a super lightweight design with a 4mm centre hole the shaft is hardened for increased durability while the low weight of only 12.5g makes for less rotating mass of the drive train.

Source: KM [km-rc.com]

July 6, 2012

JConcepts Mono wheels, wheel nuts & body clips

JConcepts introduce the B44.1 Mono wheels, 8/32″ thin-pattern locking wheels nuts and black medium-size body clips. Starting with the wheels, these are a direct fit on the Team Associated B44.1 buggy and match the design of the rear Mono wheels that are around for a while now. They offer the maximum size allowed under ROAR rules and make a statement with their large appearance, slight convex dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. The wheel comes in sets of four and is available in yellow and white colour.

Click here to continue reading